• Journal of the Korean Applied Science and Technology
• /
• v.35 no.2
• /
• pp.325-335
• /
• 2018

This study is for checking the possibility of ginseng complex as cosmetic materials. For this we carried out biological active evaluation about anti-inflammatory and whitening effects by using ethanol extract of ginseng complex. Samples were prepared by extracting 70% ethanol from each of Panax ginseng C. A. Meyer (A), Phellinus linteus (B) and Pinus rigida Mill. (C), and mixing them at a ratio of (A) 1 : (B) 1 : (C) 0.5. In order to evaluate the anti-inflammatory effects of the samples in macrophages (RAW 264.7 cells), MTT assay was used to evaluate the toxicity of the samples and the inhibitory activity of nitric oxide production and the expression levels of inflammation-related proteins and genes. To evaluate the whitening effect of the samples in melanoma (B16F10 cell), MTT assay was used to evaluate the toxicity of the sample, cellular tyrosinase inhibition, and melanin contents. The inhibitory activity of nitric oxide in the LPS-induced RAW 264.7 cells was 71.2% at $25{\mu}g/mL$ concentration and western blot analysis showed that the expression of iNOS and COX-2 protein decreased in a concentration-dependent manner. Inhibition of tyrosinase activity showed 36.8% inhibition at $50{\mu}g/mL$ concentration of ginseng complex and inhibition of melanin contents showed 47.8% inhibition at $50{\mu}g/mL$ concentration. From the results of the experiment, it was confirmed that the ginseng complex had excellent anti-inflammatory and whitening effect and could be used as a safe natural cosmetic material in the future.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.3
• /
• pp.255-262
• /
• 2020

Blended cement with fly ash and bottom ash from Circulating Fluidized Bed Combustor boiler(CFBC) burned at a low temperature, can be high heat of hydration and abnormal setting caused by higher volumn contents of Fe₂O₃, free-CaO, SO₃. In this study, the ground CFBC bottom ash powder mixed with blast furnace slag was used as substitute activator of gypsum and recycled iron slag was produced from mix and pulverized by ball mill to increase the recycling rate. The effect on compressive strength of cements with the mixture of original and hydrated bottom ash mixtures with BFS with small water, respectively, was analyzed, and it was found that the hydrated bottom ash activator was more effective in initial strength development. To improve the initial strength of blended cement, an activator mixed with a blast furnace slag and bottom ash mixing ratio of 5:95 and 10:90, respectively, the slag cement by about 6%, and it was analyzed to develop an initial strength similar to gypsum as a conventional activator.

• The Korean Journal of Soil Zoology
• /
• v.7 no.1_2
• /
• pp.17-21
• /
• 2002

Food waste which had been mixed with night soil sludge and composted for 21 days (mixing ratio = food waste/paper mill sludge : 1, w/w) was supplied to the 5 g of Eisenia fetida popualtion at various temperatures (5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 31, 32, 33, 34, 35$^{\circ}C$). The biomass of earthworms one month after feeding at 20-32$^{\circ}C$ was about two times more than that of the introduced earthworms, increasing rate of which was much higher than them at the other tested temperatures . There were decreases at temperatures below 7$^{\circ}C$, and less increases at temperatures of 8-10$^{\circ}C$ in biomass. Earthworms could not survive at temperatures at 34$^{\circ}C$ and 35$^{\circ}C$. Feeding rates of earthworms were much higher at 20-32$^{\circ}C$ than them at the other tested temperatures, and there were no differences among them at temperatures of 20-32$^{\circ}C$. But at 3 months after feeding, the biomass and feeding rate of earthworms decreased severely even at 20$^{\circ}C$ and 30$^{\circ}C$, which was supposed to be due to the long term effect of salts, especially sodium chloride (NaCl) in the food wastes.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.3
• /
• pp.283-291
• /
• 2018

Objectives: To monitor the radon concentration level in plants that handle phosphorus rock and produce gypsum board and cement, and evaluate the effective dose considering the effect of radon exposure on the human body. Methods: Airborne radon concentrations were measured using alpha-track radon detectors (${\alpha}$-track, Rn-tech Co., Korea) and continuous monitors (Radon Sentinel 1030, Sun Nuclear Co., USA). Radon concentrations in the air were converted to radon doses using the following equation to evaluate the human effects due to radon. H (mSv/yr) = Radon gas concentration x Equilibrium factor x Occupancy factor x Dose conversion factor. The International Commission on Radiological Protection (ICRP) used $8nSv/(Bq{\cdot}hr/m^3)$ as the dose conversion factor in 2010, but raised it by a factor of four to $33nSv/(Bq{\cdot}hr/m^3)$ in 2017. Results: Radon concentrations and effective doses in fertilizer manufacturing process averaged $14.3(2.7)Bq/m^3$ ($2.0-551.3Bq/m^3$), 0.11-0.54 m㏜/yr depending on the advisory authority and recommendation year, respectively. Radon concentrations in the gypsum-board manufacturing process averaged $14.9Bq/m^3$ at material storage, $11.4Bq/m^3$ at burnability, $8.1Bq/m^3$ at mixing, $10.0Bq/m^3$ at forming, $8.9Bq/m^3$ at drying, $14.7Bq/m^3$ at cutting, and $10.5Bq/m^3$ at shipment. It was low because it did not use phosphate gypsum. Radon concentrations and effective doses in the cement manufacturing process were $23.2Bq/m^3$ in the stowage area, $20.2Bq/m^3$ in the hopper, $16.8Bq/m^3$ in the feeder and $11.9Bq/m^3$ in the cement mill, marking 0.12-0.63 m㏜/yr, respectively. Conclusions: Workers handling phosphorous gypsum directly or indirectly can be assessed as exposed to an annual average radon dose of 0.16 to 2.04 mSv or 0.010 to 0.102 WLM (Working Level Month).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.1
• /
• pp.5-9
• /
• 2008

Cordierite has a very low thermal expansion coefficient, but has problem that it has a weak mechanical strength and is apt to be attacked by acid such as sulfur for using as a diesel particulate filter support. The physical properties of $ZrTiO_4$ modified with $SiO_2,\;Al_2O_3$, MoOx, $Cr_2O_3\;and\;Nb_2O_5$ were investigated with XRD, SEM, UTM and thermal expansion, etc. in this paper. $ZrTiO_4$ powder was synthesized as a monoclinic structure with processes that starting materials of $TiO_2\;and\;ZrO_2$ were mixed with ball mill and calcined above $1240^{\circ}C$ for 3 hr. Additive modified $ZrTiO_4$ specimens for flexural strength and thermal expansion measurement were obtained by mixing $ZrTiO_4$ powder with additives, pressing and firing at $1300^{\circ}C$ for 3 hr. The porosity of additive modified $ZrTiO_4$ decreased monotonically with increasing additive content by 5 wt% regardless of additive types and saturated for further increase of additive by 10wt. The flexural strength of $Al_2O_3$ (5, 10 wt%) modified $ZrTiO_4$ shows a large increase, but that of other additives modified $ZrTiO_4$ decreased. The thermal expansion coefficient of additive modified $ZrTiO_4$ except $Nb_2O_5$ decreased continuously with the content of additive. In particular, the lowest thermal expansion coefficient of $ZrTiO_4$ was obtained for the additive of $SiO_2$.