• 한국추진공학회지
• /
• 제10권3호
• /
• pp.9-17
• /
• 2006

본 연구는 케로신-LOX를 추진제로 하는 액체로켓엔진용 스월 동축형 인젝터의 리세스 길이에 따른 분무특성 파악을 목표로 하였다. 리세스 길이에 따른 두 추진제의 내부충돌현상에 의한 ripple의 형성과 감쇠가 인젝터 외부의 분무안정성에 영향을 미치므로 분무특성과 큰 연관성을 가진다. 또한, 리세스 길이가 증가함에 따라 평균액적크기는 증가하였으며, 혼합효율은 증가하다가 최대값에 도달한 후 다시 감소하는 경향성을 보였다.

• 대한기계학회논문집B
• /
• 제34권9호
• /
• pp.851-857
• /
• 2010

작은 장치 스케일과 낮은 Reynolds number를 수반하는 마이크로 채널에서의 혼합효율 최대화를 위하여 사각형 장애물을 이용한 Passive 마이크로 믹서의 최적 설계를 수행하였다. 이를 위해 본 연구에서는 구조가 단순한 Y-Channel내부에 사각형 장애물의 개수와 그 크기, 그리고 위치를 변화시켜가면서 비정렬 해석 기법을 이용하여 해석을 수행하였다. 또한 최대 허용 압력 강하값을 제한 조건으로 설정하여 제한조건을 만족하면서 혼합 효율을 최대화하는 Y-Channel 형상의 최적화를 수행하였다. 이를 통하여 2개의 사각형 장애물을 사용할 경우 원형 장애물의 결과와 비교했을 때 최대 2.5% 혼합 효율이 향상됨을 확인하였다.

• 한국물환경학회지
• /
• 제18권3호
• /
• pp.291-301
• /
• 2002

In this study, nutrients treatment by sequencing batch reactors(SBR) was performed. Nitrogen and phosphorus removal efficiencies were evaluated by changing SRT and mixing/aeration ratio. Not only nitrogen but also phosphorus removal patterns were investigated through track studies on 1 cycle. As SRT was fixed and mixing/aeration ratio was changed, maximum nitrogen removal efficiency was 87.6% at mixing/aeration ratio 0.67. Phosphorus removal efficiencies were more than 85.5% except no mixing condition. As mixing/aeration ratio was fixed and SRT was changed, nitrogen removal efficiencies were 70.5~79.8%, which represented slight changes, while phosphorus removal efficiencies were 49.0~97.3%, which represented sharply decreasing tendency at less than 20 day. Both phosphorus release rate k and maximum phosphorus release rate $P_{max}/M$ were are decreased as SRT was decreased, but they were not affected by mixing/aeration ratio. It was found that there is a linear relationship between ortho-phosphate uptake and maximum ortho-phosphate release.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.225-232
• /
• 2003

분리 삼중충돌 제트의 액상 혼합에 대한 실험적 연구결과를 통해 분리 삼중충돌 인젝터의 요소설계시 고려해야 할 기하학적 파라메타와 혼합성능을 고려하는 방법을 제시하였다. 실험은 비반응성인 케로신과 물을 사용하여 수행하였으며, 분사공의 기학적 조건과 분사조건(운동량비)에 따른 국소혼합비 분포를 측정하여 혼합효율 및 혼합특성속도를 산출하였다. 분사공의 각종 기하학적 요소와 운동량비에 따른 혼합효율 및 혼합 특성속도를 비교/분석하고 혼합성능과 연소성능과의 상관관계를 규명하였으며, 혼합의 정도를 향상시키는 설계점과 혼합성능 측면에서의 분리 삼중충돌 인젝터의 최적 설계조건에 대하여 고찰하였다.

• 대한화장품학회지
• /
• 제19권1호
• /
• pp.85-107
• /
• 1993

화장품에 사용되는 미분체의 혼합특성을 알기 위하여 화장품용 미분체 혼합기인 ribbon mixer, powder mixer micropulverizer, fine impact mill에 미립자, 구상 및 판상의 형태를 가진 bulk powders를 혼합시간을 변화 시키면서 혼합하는 실험을 하였다. 혼합분체의 혼합정도를 평가하기 위하여 산화철을 tracer로 사용하였으며, 원료 및 혼합물의 particle size distribution, specific surface area, density 및 표면색상을 측정하였다. 미분체 혼합물의 혼합시간과 표면색상변화, 입도분포 및 비표면적과의 사이에 대수적 1차 상관관계가 성립되었고, 색상의 변화로부터 혼합정도를 평가할 수 있는 간단한 식을 도출하였다. 사용된 혼합기에 대해 혼합기구별 modelling과 혼합에 따른 입도 분포 및 비표면적의 변화로부터 혼합기 impellar tip에서의 linear velocity별 혼합기는 대류혼합, 전단혼합 및 확산혼합으로 분류되었다.

• 한국축산식품학회지
• /
• 제20권1호
• /
• pp.30-35
• /
• 2000

The method used to remove cholesterol from egg by using $beta$-cyclodextrin was relatively stable and efficient. The aim of this study was to cost down by recycling $\beta$-cyclodextrin used to remove cholesterol from egg yolk because $\beta$-cyclodextrin was expensive. The solvents used to separate $\beta$-cyclodextrin from $\beta$-cyclodextrin complex containing egg yolk cholesterol were butanol, chloroform, ether, hexane, methanol, 2-propanol and their mixture. The ratio of solvent and complex varied from 2 : 1 to 10 : 1. The condition of mixing time and temperature varied from 30 to 60$^{\circ}C$ and from 10 minutes to 3 hours to remove cholesterol from $\beta$-cyclodextrin complex. When the ratio of choloroform and methanol was 1 : 1, the removal efficiency of cholesterol was 98.8%. The efficiency of cholesterol removal was improved when the ratio of solvent : complex increased to 4 : 1. When mixing time and temperature was up to for 1hr, at 50$^{\circ}C$ respectively, the efficiency of cholesterol removal improved to 99%. It concluded that the efficiency of cholesterol removal of 50% renewed one contained $\beta$-cyclodextrin were 81.1% while the cholesterol removal efficiency of 100% renewed $\beta$-cyclodextrin was 24% if cholesterol removal efficiency of new $\beta$-cyclodextrin were 100%.

• 한국환경과학회지
• /
• 제6권6호
• /
• pp.579-588
• /
• 1997

In order to see the stratification related to the heat flux In Deukryang Bay, the oceanographic data on July 12, 1994 and the meteorological data of Kohung and Kwangju meteorological stations were analysed. The temperature durerences between the sea surface and the near bottom were 1~3 ton spring tide (July 12, 1994) In Deukryang Bay. The temperature anomalies were high about 3t during summer In 1994. These mean that the non mixing was not effective In destroying the stratification due to the sea surface heating by the solar radition, even though it was on spring tide. The maximum solar radiation was about 600 ly/day, which was the value of the same date of oceanographic observation. The sensible and the latent heat flux which are 0~100 ly/day were not so varied during summer. The absorbed heat flux through the sea surface was mostly lost by the back radiation. which ranges are about 0~-400 ly/day. The dimensionless mixing parameter related to the buoyancy flux was 5~150$\times$$10^{-5}$. The efficiency of tidal mixing to destroy the stratecation was 0.4~0.6%.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권1호
• /
• pp.65-72
• /
• 2006

Heat transfer augmentation in heat exchangers has received much attention in recent years, mainly due to energy efficiency and environmental considerations. Many active and Passive techniques are currently being employed in heat exchangers, with some inserts providing a cost-effective and efficient means of augmenting heat transfer. The Purpose of this paper is to determine the pressure loss and heat transfer characteristics of a heat exchanger using static mixing technology. Experimental measurements were taken on two set-ups: a single tube heat exchanger and a shell-tube heat exchanger with two static mixing inserts. It was concluded that the static mixing inserts resulted in an increase in the pressure loss and heat transfer characteristics as can be expected.

• 한국전산유체공학회지
• /
• 제11권4호
• /
• pp.101-106
• /
• 2006

In the microfluidic devices the most important thing is mixing efficiency ol various fluids. In this study a newly designed miler is proposed to enhance the mixing effect with the purpose to apply it to microchannel mixing in a short future. This design is composed of a channel with cross baffles periodically arranged on the both bottom and top surfaces ol the channel. To obtain the yow patterns, the numerical computation was performed by using a commercial code, ANSYS CFX 10.0. To evaluate the mixing performance, we computed Lyapunov exponent and obtained Poincare sections. it was shown that our design provides the excellent mixing effect.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제23회 추계학술대회 논문집
• /
• pp.282-287
• /
• 2004

Unielement combustion tests were conducted using coaxial bi-swirl injectors. Major experimental parameters were a recess length and a fuel-side swirl chamber. Combustion efficiency mainly depends on a mixing mechanism for the present coaxial swirl injectors. Low-frequency pressure excitations around 200Hz were observed for all injectors. However, dynamic behaviors considerably differ for an external and an internal mixing case controlled by a recess length. The internal mixing induces mixture to be biased at a specific frequency in a mass flow rate, which results in a relatively high amplitude of pressure fluctuations but results for the external mixing case show that fuel and oxidizer mixture flow carries more complicated, multiple wave characteristics due to broad mixing region as well as disintegration and merging phenomena of propellant films.