• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.60-61
• /
• 2019

Concrete carbonation is one of the factors that reduce the durability of concrete. In modern times, due to industrialization, the carbon dioxide concentration in the atmosphere is increasing, and the impact of carbonation is increasing. So, it is important to understand the carbonation resistance according to the concrete compounding to secure the concrete durability life. In this study, we want to predict the concrete carbonation velocity coefficient, which is an indicator of the carbonation resistance of concrete, through the deep learning algorithm, and to find the activation function suitable for the prediction of carbonation rate coefficient as a process to determine the learning accuracy through the deep learning algorithm. In the scope of this study, using the ReLU function showed better accuracy than using other activation functions.

• 한국지반공학회논문집
• /
• 제34권10호
• /
• pp.39-49
• /
• 2018

본 연구는 심층혼합시료의 탄성계수를 파악하기 위하여 점토, 모래, 자갈의 입도 구성조건에 안정재 혼합비 8%, 10%, 12%, 14%로 혼합하여 총 320개의 공시체를 제작하였다. 이러한 공시체를 사용하여 일축압축시험을 수행하였고, 일축압축강도와 변형률을 분석하여 할선탄성계수와 접선탄성계수를 구하였다. 실내시험 결과 모든 심층혼합시료는 양생기간과 안정재 혼합비가 증가함에 따라 일축압축강도가 증가하였는데, 이에 대한 할선탄성계수와 접선탄성계수도 증가하는 경향이 뚜렷하게 나타났다. 양생기간에 따른 탄성계수 값의 증가는 할선탄성계수보다 접선탄성계수가 크게 나타났지만, 탄성계수의 증분비는 할선탄성계수가 크게 나타났다. 안정재 혼합비 8%에 대한 탄성계수와 안정재 혼합비 10%, 12%, 14%에 대한 탄성계수 값을 비교하여 안정재 혼합비에 따른 탄성계수를 추정할 수 있는 상관관계식을 공시체 조건별로 구하였다. 심층혼합시료의 입경이 굵어지면 각각의 탄성계수가 증가하는 경향이 나타났으며,가장 큰 영향을 미치는 입경의 분포는 모래질의 구성비가 높을 때 나타났다. 한편 탄성계수증가는 공시체 종류별로는 모래질 공시체가 점토질과 자갈질 공시체보다 크게 나타났다. 이러한 결과를 바탕으로 심층혼합시료의 입도 분포와 안정재 혼합비로 현장의 심층혼합지반의 적절한 지반정수를 제안할 수 있을 것으로 판단된다.

• 자원리싸이클링
• /
• 제29권1호
• /
• pp.43-52
• /
• 2020

본 연구는 산업부산물을 다량 활용하여 지반 함몰 발생시 긴급 복구를 위한 저강도·고유동 경량기포 콘크리트의 최적배합을 설정하고, 이를 현장에 적용하여 가능성을 평가하기 위한 연구이다. 실험의 변수로는 배합수 대비 기포제의 혼입률과 페이스트 용적대비 기포의 혼입률이며, 실험을 통하여 선정된 최적배합으로 현장적용을 통한 기초특성을 평가하였다. 실험결과 배합수 대비 최적의 기포제 혼입률은 10%가 가장 효율적이라 판단되었으며, 페이스트 대비 선발포된 기포의 혼입률은 170%에서 목표를 만족하였다. 그러나, 현장적용 시안정적인 품질확보를 위하여 기포 혼입률은 140%로 현장의 배합에 적용하였다. 친환경 결합재를 이용한 저강도·고유동 경량기포 콘크리트의 현장적용 결과 목표성능을 모두 만족하여 지반복구용 배합 및 공법으로서의 가능성을 확인하였다. 그러나 기포 및 페이스트간의 분리로 인한 상하부의 품질편차가 발생함에 따라 이의 개선을 위한 후속연구가 요구된다.

• 융합정보논문지
• /
• 제12권3호
• /
• pp.132-140
• /
• 2022

본 연구에서는 데커신 및 데커시놀 안젤레이트를 이용한 최적의 로션 제조 공정을 확인하기 위하여 연구를 진행하였다. 초기 로션 제형은 3개월 동안 점도(5,208±112 cPs), 함량(99.71±1.01%) 및 pH(5.62)을 유지하는 것을 확인하였다. 제조 공정D 혼합 4의 최적 제조 공정 확인은 22+3 완전 배치 요인법을 이용하였으며, 독립변수로 혼합 온도(40-80℃)와 혼합 시간(10-30 min)으로 종속변수로써 중요품질특성인 함량, pH, 질량편차를 확인하였다. 함량 및 질량편차는 도출된 회귀방적식의 결정계수는 약 0.9였고 p-value값은 0.05보다 작아 모델적합성을 확인하였다. 로션 제조를 위한 최적의 온도조건과 혼합 시간은 61.93℃와 15.85분으로 확인되었다. 혼합4 공정에 있어 혼합 온도(60℃)와 혼합 시간(15 min)에서의 함량은 100.69%, pH는 5.57, 질량편차는 98.07%으로 예측되었고, 실제 검증에서는 각각 100.29±0.98%, 5.57±0.02, 98.27±0.89%으로 예측된 값에 대하여 유사한 결과까지 확인 할 수 있었다.

• 한국도로학회논문집
• /
• 제7권1호
• /
• pp.39-47
• /
• 2005

최근 들어 섬유혼합토가 도로 및 철도의 성토노반, 기층재료로 활용되기 시작하여 섬유혼합토의 변형특성에 대한 연구가 필요하게 되었다. 본 논문에서는 공진주시험을 통하여 섬유혼합토의 거동특성과 보강효과를 평가하였다. 여러 가지 입도의 사질토에 폴리프로필렌(polypropylene) 재질의 단섬유(staple fiber)를 중량비 0.3%로 혼합하여 시료를 성형하였다. 섬유혼합토의 최대전단변형계수는 양입도일수록 증가해, 비혼합토에 비해 최대 30%까지 증가하였다. 양입도의 전단변형계수는 빈입도보다 모든 전단변형률 범위에서 구속압에 관계없이 더 커, 양입도일수록 보강효과가 좋은 것으로 평가되었다.

• 한국자동차공학회논문집
• /
• 제23권5호
• /
• pp.502-507
• /
• 2015

In this paper, we built a three-dimensional model by applying reverse engineering techniques on targeting the intake port of 2900cc class diesel engine before that three-dimensional design technique is applied. The performance of the intake port is predicted and analysed using the computational flow analysis. Flow Coefficient and Swirl Ratio have been analyzed for two intake port models. One is the intake port for the diesel engine with plunger-type fuel system, and the other is for the diesel engine with CRDI fuel system. Computational result shows that the Flow Coefficient of the intake port with CRDI fuel system is increased upto 10 percentage compared with that with plunger-type. Also, the intake port with plunger-type has high Swirl Ratio at high valve lift, and the intake port with CRDI fuel system has high Swirl Ratio at relatively low valve lift. It is believed that because of high performance of the fuel injector, the intake port with CRDI fuel system is designed for more air amount and not much swirl flow at high valve lift. However, high swirl flow is required at low valve lift for initial fuel and air mixing. The result of this study may be useful for the re-manufacturing industry of automotive parts.

• 한국농공학회지
• /
• 제32권3호
• /
• pp.102-115
• /
• 1990

Importance of anaerobic digestion as an energy generating device has been increased as fuel shortage becomes serieous. Several modification methods on the conventional digesters including Powdered Activated Carbon (PAC) addition and two-phase digestion were studied to enhance the gas production. This study investigated the effects of PAC on anaerobic digestion of chicken manure in terms of gas production and sludge stabilization. As a first experiment, an optimum PAC dose for efficient gas production was determined in a batch test. In semi-continuous experiments, an optimum Sludge Retention Time (SRT) at that PAC concentration and an overall substate utilization rate coefficient were investigated. A portion of gas increased by PAC addition was estimated using a substrate utilization rate coefficient of microorganisms attached on PAC. This test was performed in batch experiments using acetic acid as a substrate. The digesters for all experiments were kept 35${\pm}$ 1˚C in a heated water bath. Mixing was performed manually once a day and the produced gas was collected for daily reading. The following conclusions were made for this study. 1. Cptimum PAC concentration was 5% total solids, where gas production rate was increased by 20 percents. 2. Optimum SRT was 7.5 days. 3. Substrate utilization rate coefficient of microorganisms attached on PAC was about twice as much as that of suspended ones.

• 한국대기환경학회지
• /
• 제28권1호
• /
• pp.86-93
• /
• 2012

We present a retrieval method to obtain dust backscatter coefficient from the mixed Asian dust and pollutant layer. In the present study, vertically resolved quartz (silicon dioxide, silica) concentration was calculated using Raman scattering signals from quartz at 546 nm. Dust concentration was obtained based on typical mass percentage of quartz in Asian dust. The highest value of dust concentration at 3.7 km in March 21, 2010 was 22.3 and 10.9 ${\mu}gm^{-3}$ according to the quartz percentage in Asian dust as 65 and 30% based on literature survey, respectively. OPAC (Optical Properties of Aerosol and Clouds) simulations were conducted to calculate dust backscatter coefficient. The retrieved dust concentration was used as an input parameter for the OPAC calculations. Utilization of quartz Raman channel in Lidar measurements is considered useful for distinguishing optical properties of dust and nondust aerosol in the mixing state of Asian dust.

• 대한기계학회논문집B
• /
• 제25권8호
• /
• pp.1122-1130
• /
• 2001

Film cooling performance from two rows of holes with opposite orientation angles is evaluated in terms of heat flux ratio. The film cooling hole has a fixed inclination angle of 35°and orientation angle of 45°for the downstream row and -45°for the upstream row. Four film cooling hole arrangements including inline and staggered configurations are investigated. The blowing ratio studied was 1.0. Boundary layer temperature distributions are measured to investigate injectant behaviors and mixing characteristics. Detailed distributions of the adiabatic film cooling effectiveness and the heat transfer coefficient are measured using TLC(Thermochromic Liquid Crystal). For the inline configuration, there forms a downwash flow at the downstream hole exit to make the injectant well attach to the wall, which gives high adiabatic film cooling effectiveness and heat transfer coefficient. The evaluation of heat flux ratio shows that the inline configuration gives better film cooling performance with the help of the downwash flow at the downstream hole exits.

• Structural Engineering and Mechanics
• /
• 제49권6호
• /
• pp.763-773
• /
• 2014

The recently developed Ultra High Performance Concrete (UHPC) displays outstanding compressive strength and ductility but is also subjected to very large autogenous shrinkage. In addition, the use of forms and reinforcement to confine this autogenous shrinkage increases the risk of shrinkage cracking. Accordingly, this study adopts a combination of shrinkage reducing admixture and expansive admixture as a solution to reduce the shrinkage of UHPC and estimates its appropriateness by evaluating the compressive and flexural strengths as well as the autogenous shrinkage according to the age. Moreover, the coefficient of thermal expansion known to experience sudden variations at early age is measured in order to evaluate exactly the autogenous shrinkage and the thermal expansion is compensated considering these measurements. The experimental results show that the compressive and flexural strengths decreased slightly at early age when mixing 7.5% of expansive admixture and 1% of shrinkage reducing admixture but that this decrease becomes insignificant after 7 days. The use of expansive admixture tended to premature the setting of UHPC and the start of sudden increase of autogenous shrinkage. Finally, the combined use of shrinkage reducing admixture and expansive admixture appeared to reduce effectively the autogenous shrinkage by about 47% at 15 days.