• Textile Coloration and Finishing
• /
• v.2 no.1
• /
• pp.21-30
• /
• 1990

In order to obtain high dye uptake initially, polyethylene terephthalate (PET) filaments were dyed with C.I.Disperse Orange 3 and Red 1 in mixed solvents of tetrachloroethylene acidic solvent, ethyl alcohol and tetrachloroethylene basic solvent, DMF. The dyeing behavior in the mixed solvent of tetrachloroethylene and basic solvent, DMF, the initial uptake of disperse dyes increased rapidly. The shrinkage of PET increased when the solubility parameter values of PET fiber and mixed solvent approached graduately.

• Journal of Environmental Health Sciences
• /
• v.20 no.4
• /
• pp.10-16
• /
• 1994

A Study was performed in order to measure mixed organic solvent concentrations in air of painting operations during January 5-28, 1991. The mixed organic solvent concentrations were analyzed by the gas chromatography. The results were as follows: 1. The detection of organic solvent was highest in aromatic hydrocarbon(68%), and followed by aliphatic hydrocarbon (18%), and ketone (14%). 2. The detection of organic solvent by component category was highest in the grid class solvent (79.4%), and followed by the 3rd class solvent (20.6%). 3. Number of cases exceeding TLVS of mixed solvent level in air was highest on dipping operation (44%), and followed by spray operation (40%), dry and washing operation (33%), and adhensive operation (12%).

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.1
• /
• pp.3-18
• /
• 1997

This study was conducted to evaluate desorption efficiencies by types of desorption solvent for polar and non-polar organic compounds collected on activated charcoal tubes. Analytes tested were toluene, m-xylene, isobutyl alcohol, n-butyl alcohol, cellosolve acetate, and butyl cellosolve. Three different concentration levels of spiked sample were made. Types of cosolvent mixed with the main solvent, $CS_2$, were methanol, pentanol, and dimethylformamide (DMF) and the cosolvent for methylenechloride was methanol. The amounts of cosolvent added to the main solvent were 1, 5, and 10% by volume (v/v%), respectively. The results were as follows: 1. For all mixed solvents except 1% methanol and 1% pentanol with $CS_2$, desorption efficiency significantly increased, compared with that of $CS_2$ alone. 2. Desorption efficiency increased by increasing analyte loading on charcoal tube regardless of mixed solvents used and the material polarity. 3. For all cosolvents mixed with $CS_2$ by 1% and 5% volume, desorption efficiency for non-polar compound was significantly higher than that of polar compound. For the 10% mixed solvents and the methylenechloride mixed with methanol, the results were opposite. 4. The lowest mean percent bias of 4.79% was obtained from the 5% DMF-$CS_2$ mixed solvent, followed by 4.82% from the 10% DMF-$CS_2$ solvent while the highest bias of 23.26% was from the solvent of $CS_2$ alone. Based on the results of this study, in order to increase desorption efficiency, it is recommended to add such cosolvents as methanol, pentanol, and DMF to $CS_2$, preferably 5% by volume for analyzing polar compounds collected in charcoal tubes.

• YAKHAK HOEJI
• /
• v.5 no.1
• /
• pp.20-23
• /
• 1960

The study of the isolative determination of the mixed weak bases of INAH and NA-Pas potentimetrically considering the properties of solvents for the INAH and Na-PAS, dielectric constant and solvative properties of solvents are described. The methanol: dioxan (4:1) and glacial acetic acid: dioxan (4:1) are studied first as the mixed solvent, using the N/10 perchloric acid and glacial acetic acid solution as the titrant. The authors found that there is no inflection on INAH with the methanol: dioxan solvent system and on Na-PAS at glacial acetic acid dioxan solvent system. By applying methanol glacial acetic acid dioxan (1:1:1) solvent system, Na-PAS and INAH were successfully determined isolatively from the mixed sample, showing the distinguished inflections respectively as shown in the titration curves in figures 3 and 4. It is found that this method could save considerable time for the isolative determination of the mixed sample of week bases as Na PAS and INHA which were quite difficult to be determined by the present routine at control laboratory.

• The Journal of Natural Sciences
• /
• v.9 no.1
• /
• pp.169-175
• /
• 1997

In this study, it was investigated about dyeability, light-fastness, wash-fastness and tensile strength in PET fiber using the effective carrier solvent such as benzyl alcohol, benzaldehyde and acetophenone. As a results, dyeability in mixed solvent was better than that of single solvent. And dyeability in mixed solvents of benzyl aldehyde and acetophenone was of them. But effective carrier action was resulted in decrease of properties such as light-fastness and tensile strength of PET fiber after dyeing.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.2
• /
• pp.95-108
• /
• 2000

Electrochemical charateristics of activated carbon fiber cloth(ACFC) electrode were studied with propylene carbonate(PC), ${\gamma}$-butyrolactone(GBL) and N,N-dimethyl-formamide(DMF) as a solvent and tetraethylammoniumtetrafluoroborate(TEABF$_4$), tetraethylammoniumhexafluorophosphate(TEABF$_{6}$), tetrabutylammoniumtetrafluoroborate(TBABF$_4$) and tetrabutylammonium hexafluorophosphate(TBAPF$_6$) as an electrolytes(active material). The concentrations of electrolytes were in the range of 0.2~1.2 N, the volume ratios of PC and DMF as a mixed solvent system, were 90：10, 80：20, 70：30, 60：40, 50：50, and 40：60 vol%. Electrochemical characteristics such as electric conductivity, internal resistance, and electric capacitance of fabricated unit cells were measured after the moisture of activated material was removed with molecular sieve. Electrochemical characteristics were better in mixed solvents system than in mono solvent system. The mono solvent system of 1.0 N electrolyte of GBL/TEABF$_4$ with activated carbon cloth electrodes showed better result but the mixed solvent system with PC and DMF/TEABF$_4$(50：50 vol%) and the concentration of 1.0 N electrolyte showed the best characteristics. Internal resistance was 3.47 $\Omega$ and specific capacitance was 19.1 F/g respectively.y.

• YAKHAK HOEJI
• /
• v.20 no.1
• /
• pp.41-43
• /
• 1976

The dissociation constant of phenol red indicator in mixed solvents was studied. Methanol and ethanol were employed as solvents and studied the changes of pK values of indicator according to the kind and concentration of organic solvent which is mixed into water solution. The effect of methanol solvent on pK is negligible at 40%, 60% and 80% mixing. While in the case of ethanol, the effect of above 40% mixing is not negligible.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.811-817
• /
• 2001

Crystallization behaviour of bisphenol A polycarbonate(PC) from amorphous phase was studied by varing solvent/nonsolvent ratios in liquid phase. Chloroform and isopropanol were used as a solvent and a nonsolvent, respectively. Samples were characterized by optical microphotography, scanning electron microscope (SEM), X-ray diffaction (XRD), and differential scanning calorimeter (DSC). DSC and XRD measurement were used to determine the crystallinity of PC. The solubility constant seems to critical to control the PC crystallinity in solvent/nonsolvent mixture. The difference in PC crystallinity is explained by the difference in solubility constant of the mixture depending on the solvent/nonsolvent ratio. PC solution of 75/25 wt% (solvent/nonsolvent) ratio produced PC powder showing maximum crystallinity. At this condition solubility constant (9.85) of the mixed solvent was close to PC (9.9).

• Bulletin of the Korean Chemical Society
• /
• v.21 no.3
• /
• pp.351-352
• /
• 2000

• Journal of Korean Society of Forest Science
• /
• v.110 no.3
• /
• pp.431-439
• /
• 2021

The present study evaluated the antioxidant activity, skin wrinkle reduction, and whitening activity of Pinus koraiensiscone scale extracts made with three different solvents (ethanol, supercritical fluid, and a mixture of both). Total polyphenol content was 11.03 mg/g GAE in the supercritical fluid extractand 33.79 mg/g GAE in the 70% ethanol extract. Electron donating ability of 1,000 ㎍/mL extract was 13.60% in the supercritical fluid extract, 91.37% in 70% ethanol extract, and 71.62% in mixed solvent extract. SOD-like activities in 100 ㎍/mL extract using supercritical fluid, 70% ethanol, and mixed solvents were 16.49%, 21.84%, and 10.7%, respectively. The ABTS⁺ radical scavenging activities of 1,000 ㎍/mL extract were 38.19%, 80.23%, and 78.72%for supercritical fluid extract, 70% ethanol extract, and mixed solvent extract, respectively. Tyrosinase inhibitory activities in 1,000 ㎍/mL extract were 24.54%, 36.55%, and 15.23% for supercritical fluid extract, 70% ethanol extract, and mixed solvent extract, respectively. Elastase inhibitory activities in 1,000 ㎍/mL extract were 15.62%, 22.56%, and 26.64% for supercritical fluid extract, 70% ethanol extract, and mixed solvent extract, respectively. Skin astringent activity (81.23% with 5000 ㎍/mL extract) was only detected in the 70% ethanol extract. Supercritical fluid and mixed solvent extracts showed no such activity. Our analysis of Pinus koraiensiscone scale extracts show that the highest aggregate activity was found in the 70% ethanol extract, followed by mixed solvent and supercritical fluid extracts. Therefore, our results oppose the hypothesis stating supercritical extract has the highest total polyphenol content and antioxidant activity.