• 제목/요약/키워드: mixed salts

검색결과 113건 처리시간 0.027초

마그네슘의 용융염전해시(熔融鹽電解時) 두 가지 염욕조성(鹽浴組成)의 비교실험 (Comparison of Two-Types Compositions of Mixed Salts in Fused Salt Electrolysis of Magnesium)

  • 박형규;박진태;최영윤
    • 자원리싸이클링
    • /
    • 제15권2호
    • /
    • pp.32-36
    • /
    • 2006
  • 마그네슘은 자동차 엔진 경량화재료 및 휴대폰과 노트북 PC케이스 등 기능성 경량재료로서의 용도개발과 함께 수요가 증가하고 있다. 마그네슘 제련법은 원료광의 특성에 따라 달라지는데 크게 용융염전해법과 열환원법 두가지로 구분할 수 있다. 본 연구에서는 염화마그네슘을 사용하여 용융염전해법에 의해 전해 마그네슘을 얻고자 하였다. 흑연양극의 침지깊이를 일정하게 하고 전해전압 7V로 두가지 조성의 염욕을 비교 실험하였다. $760^{\circ}C$에서 전해 실험한 결과 $KCl/NaCl/MgCl_2$ 혼합염욕이 $KCl/NaCl/CaCl_2/CaF_2/MgCl_2$ 혼합염욕보다 전류효율 면에서 더 효과적이었다. 회수된 전해 마그네슘의 순도는 98% 이상이었다. 본 연구를 통하여 용융염 전해장치를 Scale-up 하거나 상용화시 장치설계 등에 필요한 기초자료들을 축적할 수 있었다.

Ethephon과 Ca제제 혼용 엽면살포에 의한 플라스틱하우스에서 재배된 온주밀감의 품질향상 효과 (Effects of Foliar Spray of Calcium Salts and Ethephon on the Fruit Quality of Satsuma Mandarin (Citrus unshiu Marc. Miyagawa wase) in the Plastic Greenhouse)

  • 김용호;한승갑
    • 생물환경조절학회지
    • /
    • 제10권2호
    • /
    • pp.118-119
    • /
    • 2001
  • 감귤의 품질을 향상시킴에 있어서 ethephon의 실용상 문제점을 해결하고자 탄산칼슘제와 몇 종류의 수용성칼슘제를 가용하여 엽면살포를 하고 품질조사와 더불어 낙엽율을 조사하였다. 착색도 a값이 ethephon에 Clef-non, Cell-bine, Hicalux, Calcium acetate 가용처리가 무처리에 비해 높아져서 착색이 촉진되는 경향을 나타내어 수확기를 앞당길 수 있었다. 낙엽율은 ethephon에 Cell-bine 또는 Hicalux 가용처리한 경우에 낙엽이 현저하게 감소되었다. 당도는 ethephon 단용처리, ethephon+Clef-non, Cell-bine 가용 처리구가 무처리에 비해 각각 1.6, 1.54, 1.54$^{\circ}$Bx가 높은 결과를 보였고 산도도 이와 유사한 경향이었다. 따라서 본시험을 통하여 ethephon에 Cell-bine을 가용하여 살포하여 주는 것이 착색을 촉진시키고 낙엽율을 경감시킴과 동시에 당도를 높여서 하우스밀감의 품질을 향상시킬 수 있는 결과를 얻을 수 있었다.

  • PDF

Characterization of TCE-Degrading Bacteria and Their Application to Wastewater Treatment

  • Lee, Wan-Seok;Park, Chan-Sun;Kim, Jang-Eok;Yoon, Byung-Dae;Oh, Hee-Mock
    • Journal of Microbiology and Biotechnology
    • /
    • 제12권4호
    • /
    • pp.569-575
    • /
    • 2002
  • Two bacterial strains capable of degrading trichloroethylene (TCE), isolated form soils contaminated with various chlorinated alkenes, were identified as Alcaligenes odorous N6 and Nocardia sp. Hl7. In addition, four KCTC strains, including three strains of Pseudomonas putida and one strain of Sphingomonas chlorophenolica, exhibited an ability to degrade toluene. A. odorans N6 and Nocardia sp. H17 degraded 84% of the initial amount of TCE in a basal salts medium (BSM), containing 0.2 mM TCE as the sole source of carbon and energy, in a day. The optimal pH for growth was within a range of 7.0-8.0. A mixed culture of the four toluene-degrading isolates degraded 95% of 0.2 mM TCE with 1.5 mM toluene as an inducer, whereas no TCE was degraded by the same mixture without an inducer. When a mixed culture of all 6 isolates was used, the degradation efficiency of 0.2 mM TCE was 72% without an inducer, in a day, and 82% with toluene as an inducer. In a continuous treatment, 1,000 mg/1 of TCE in an artificial wastewater was completely removed within 18 h when an activated sludge was used along with the microbial mixture, which was 27 h laster than when only an activated sludge was used. Accordingly, it would appear that such a microbial mixture could be effectively applied to the biological treatment of wastewater containing TCE with or without an inducer.

용융염 LiCl 및 LiCl-$Li_2O$에서 내열합금 More 1과 Super 22H의 부식거동 (Corrosion Behavior of Heat-Resistant Alloys of More 1 and Super 22H in Molten Salt of LiCl and LiCl-$Li_2O$)

  • 조수행;박상철;장준선;신영준;박현수
    • 한국재료학회지
    • /
    • 제9권6호
    • /
    • pp.556-563
    • /
    • 1999
  • The corrosion behavior of heat-resistant alloys, More 1 and Super 22H in molten salts of LiCl and $LiCl-Li_2$O was investigated in the temperature range of $650~850^{\circ}C$. In a molten salt of LiCl, a dense protective oxide scale of $LiCrO_2$ was formed, following growth of oxide scale with parabolic kinetics. But in a mixed molten salt of LiCl, a dense protective oxide scale of $LiCrO_2$ was formed, following growth of oxide scale with parabolic kinetics. But in a mixed molten salt of $LiCl-Li_2$O, a porous non-protective scale of Li\ulcorner(Cr, Ni, Fe)\ulcornerO$_2$was formed, following growth of oxide scale with linear kinetics. The corrosion rate increased slowly with the increase of temperature up to $750^{\circ}C$, but above $750^{\circ}C$ rapid increase in corrosion rate observed. The corrosion behavior of Super 22H alloy was similar to that of More 1 alloy, but Super 22H showed higher corrosion resistance than More 1.

  • PDF

해양유류오염정화를 위한 유류분해 미생물제제의 평가 (Evaluation of Petroleum Oil Degrading Mixed Microorganism Agent for the Bioremediation of Petroleum Oil Spilled in Marine Environments)

  • 손재학
    • 생명과학회지
    • /
    • 제21권11호
    • /
    • pp.1599-1606
    • /
    • 2011
  • 유류분해에 있어 혼합미생물제제의 효과를 평가하기 위해 미생물제제의 처리성능과 microcosm test를 수행하였다. 유류분해세균은 0.5% Arabian heavy crude oil을 유일 탄소원으로 제공된 최소배지를 이용한 연속적인 농후배양을 통하여 분리하였다. 우수 유류분해 미생물조합인 3종의 균주(BS1, BS2, BS4)는 MSM배지에서 5일의 배양기간 동안 지방족 탄화수소를 48.4%, 방향족 탄화수소를 30.5% 생분해하였다. 처리성능 및 microcosm test는 Arabian heavy crude oil을 첨가한 후 3가지 처리조건인 무처리, 무기영양염처리 그리고 무기영양염 및 혼합미생물처리조건에서 유류화합물의 생물분해에 미치는 영향을 조사하였다. 무기영양염처리구와 무기영양염 및 혼합미생물처리구에서 지방족 탄화수소의 분해율은 실험기간 동안 유의하게 향상되었으며 두 실험구간 유의한 차이는 관찰되지 않았다. 그러나 무기영양염 및 혼합미생물처리구에서 방향족 탄화수소의 생분해율은 무기영양염제만을 처리한 시험구와 비교하여 처리성능 시험의 경우 50% 그리고 microcosm test의 경우 13%를 향상시켰다. 본 연구의 결과로부터 혼합미생물제제는 실험실, 처리성능 및 microcosm test에서 지방족뿐만 아니라 방향족 탄화수소의 생물분해를 촉진하였다. 특히 혼합미생물제제는 방향족 탄화수소의 제거를 위한 생물정화기술의 적용에 있어 유용한 도구로 판단된다.

A Series of N-Alkylimidazolium Propylhexanamide Iodide for Dye-Sensitized Solar Cells

  • Lim, Sung-Su;Sarker, Subrata;Yoon, Sun-Young;Nath, Narayan Chandra Deb;Kim, Young-Jun;Jeon, Heung-Bae;Lee, Jae-Joon
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권5호
    • /
    • pp.1480-1484
    • /
    • 2012
  • We report a series of novel imidazolium iodides based ionic liquids (NMIPHI, NAIPHI, and NBIPHI) with different functional groups for the development of a quasi-solid type electrolyte for dye-sensitized solar cells (DSSCs). The diffusion coefficients of redox ions ($I^-$ and $I_3{^-}$) are dependent on the molecular weight and it was higher for lighter salts. Among the three ionic liquids, NMIPHI showed highest efficiency of 4.18% when it was used in a liquid electrolyte of a DSSC with $ca$. 6 ${\mu}m$ thick $TiO_2$ mesoporous film. Even though the efficiency was $ca$. 19% lower than that obtained from a liquid electrolyte composed of PMII. When NMIPHI was mixed with PMII with a molar ratio of 1:1 in a solvent free electrolyte, the efficiency of the DSSCs was enhanced compared to that based on pristine PMII.

Desalination of geothermal water by membrane distillation

  • Gryta, M.;Palczynski, M.
    • Membrane and Water Treatment
    • /
    • 제2권3호
    • /
    • pp.147-158
    • /
    • 2011
  • Membrane distillation process was used for desalination of hot (333 K) geothermal water, which was applied in the plant producing heating water. The investigated water contained 120 g salts/$dm^3$, mainly NaCl. The mineral composition was studied using an ion chromatography method. The obtained rejection of solutes was closed to 100%, but the small amounts of $NH_3$ also diffused through the membrane together with water vapour. However, the composition of obtained distillate allowed to use it as a makeup water in the heating water system. The geothermal water under study was concentrated from 120 to 286 g NaCl/$dm^3$. This increase in the solution concentration caused the permeate flux decline by a 10-20%. The geothermal water contained sulphates, which was subjected to two-fold concentration to achieve the concentration 2.4-2.6 g $SO{_4}{^{2-}}/dm^3$ and the sulphates then crystallized in the form of calcium sulphate. As a results, an intensive membranes scaling and the permeate flux decline was observed. The XRD analysis indicated that beside the gypsum also the NaCl crystallites were deposited on the membrane surfaces. The fresh geothermal water dissolved the mixed $CaSO_4$ and NaCl deposit from the membrane surface. This property can be utilized for self-cleaning of MD modules. Using a batch feeding of MD installation, the concentration of geothermal water was carried out over 800 h, without significant performance losses.

폐견사류의 미세분말화 및 표면 가공제 적용 (Preparation of Fine Silk Powder and It′s Application for Surface Modification)

  • 이용우;이광길;여주홍;김종호
    • 한국잠사곤충학회지
    • /
    • 제43권1호
    • /
    • pp.41-48
    • /
    • 2001
  • The purification, dissolution and powdering of stained waste silk obtained from weaving and dyeing process were studied for the surface modification of textile fabric and plastic materials. The whiteness of stained waste silk could be improved through degumming and bleaching with sodium hydrosulfite. The water-soluble fibroin solution can be obtained by dissoving the degummed waste silk in a boiling solution of 50% calcium chloride for 60 minutes. The salts and heavy metals contained in fibroin solution were removed by electric dialysis, wool fiber filtration and gel filtration chromatography. The fibroin powder was prepared by using a fine grinder after the alkali treatment for weakening the silk fiber. The fine fibroin powder of particle size around 30 ㎛ was obtained with a ultra fine-mill, while it was finer below 10 ㎛ with a ball-mill. The dissolved or powdered silk was applied to the surface of fabric with addition of the binder (a urethane resin). The moisture content of polyester and nylon fabrics treated with the silk solution was improved due to hygroscopic property of silk. The fine fibroin powder mixed with the binder ws coated on the surface of synthetic film by use of the air pressed sprayer. It was revealed that the hygroscopicity as well as the softness of fibroin powder coated film was much improved. Therefore, it is thought that the fine silk fibroin powder is applicable as an coating agent for the surface modification of plastic and synthetic leather.

  • PDF

이뮤노글로부린 토막과 결합된 포스파티딜콜린 리포솜의 제조와 특성 (Preparation and Characteristics of Phosphatidylcholine Liposomes Covalently Coupled with Immunoglobulin Fragments)

  • 박정환;이은옥;김종득
    • Journal of Pharmaceutical Investigation
    • /
    • 제22권2호
    • /
    • pp.115-124
    • /
    • 1992
  • The characteristics and stabilities of phosphatidylcholine liposomes covalently coupled with immunoglobulin fragments prepared by the REV method were investigated by the dynamic light scattering, absorbance and calcein release. Using a sulfhydryl-reactive phospholipid derivative of N-[4$({\rho}-maleimido-phenyl)$ butyl] phosphatidylethanolamine (MPB-PE), Fab' antibody fragments were covalently combined with preformed large unilamellar vesicles (LUV), Coupling ratio was $250\;{\mu}g$ of $Fab'/{\mu}mol$ of phospholipid in vesicles, From dynamic light scattering, it was found that the size of the vesicles increases as the ratio of cholesterol to lipid increases, but that apparently, the size of liposomes was not sensitive to the existence of Fab' fragments. Regardless of inserting Fab' fragments, the absorbance of liposomes decreased as the amounts of bile salt (BS) added. At very low BS concentrations, BS/lipid aggregates would be formed in the outer vesicles monolayer, while, at the high BS concentrations, mixed micelles would be preferred. The vesicles incorporated with Fab' fragments, however, are more resistant to the bile salts than the MPB-PE vesicle are. The absorbance of vacant liposomes and calcein release resulted in that the Fab' vesicles and MPB-PE vesicles by the REV method are very stable, but that those by the sonication method sufferred the significant change of turbidities.

  • PDF

Acinetobacter sp. A54에 의한 Arabian Light 원유의 분해

  • 이창호;김희식;서현효;최성훈;오희목;윤병대
    • 한국미생물·생명공학회지
    • /
    • 제25권5호
    • /
    • pp.520-526
    • /
    • 1997
  • Bacterial strains which degrade Arabian Light crude oil were isolated by enrichment culture from oil-spilled soil. The strain A54 was finally selected after testing emulsifying activity and oil conversion rate. Strain A54 was identified as a Acinetobacter sp. based on the morphological, biochemical and physiological characteristics. It appears to be highly specialized for growth on Arabian Light crude oil in minimal salts medium since it showed preference for oil or degradation products as substrates for growth. It was found that it could grow on at least fifteen different hydrocarbons. The optimum cultural and environmental conditions were as follows; 25$\circ$C for temperature, 7,5 for pH, 2.0% for NaCl concentration and 2.0% for crude oil concentration. Additionally, the optimal concentration of NH$_{4}$NO$_{3}$, and K$_{2}$HPO$_{4}$, were 12.5 mM and 0.057 mM, respectively. Cell growth and emulsifying activity as a function of time were also determined. Crude oil degradation and the reduction of product peaks were identified by the analysis of remnant oil by gas chromatography. Approximately 63% of crude oil were converted into a form no longer extractable by mixed organic solvents.

  • PDF