• Carbon letters
• /
• 제8권4호
• /
• pp.326-334
• /
• 2007

In this study, graphite composites were fabricated by warm press molding method to realize commercialization of PEM fuel cells. Graphite composites have been considered as alternative economic materials for bipolar plate of PEM fuel cells. Graphite powder that enables to provide electrical conductivity was selected as the main substance. The graphite powder was mixed with phenolic resin and the mixture was pressed using a warm press method. First of all, the graphite powder was pulverized with a ball mill for the dense packing of composite. As the ball milling time increases, the average size of particles decreases and the size distribution becomes narrow. This allows for improvement of the uniformity of graphite composite. However, the surface electrical resistivity of graphite composite increases as the ball milling time increases. It is due to that graphite particles with amorphous phase are generated on the surface due to the friction and collision of particles during pulverizing. We found that the contact electrical resistivity of graphite particles increases as the particle size decreases. The contact electrical resistivity of graphite powders was reduced due to high molding pressure by warm press molding. This leads to improvement of the mechanical properties of graphite composite. Hydrogen gas impermeability was measured with the graphite composite, showing a possibility of the application for bipolar plate in fuel cell. And, I-V curves of the graphite composite bipolar plate exhibit a similar performance to the graphite bipolar plate.

• 폴리머
• /
• 제27권5호
• /
• pp.493-501
• /
• 2003

의치상 레진 (틀니)의 기본 물질로 사용되는 폴리(메틸 메타아크릴레이트) (PMMA) 입자를 폴리(비닐 알코올) (PVAL)을 안정제로 사용하여 현탁중합법으로 중합하였고, PVAL 농도와 교반속도, 공단량체의 도입에 따른 PMMA의 입자 크기 변화 및 분자량의 변화를 관찰하였다. 또한 합성된 PMMA 수지와 메틸 메타아크릴레이트 단량체를 이용하여 고체/액체 비 (P/L ratio)를 2:1 로 하여 병상물을 제조하고, 일정한 가압성형 조건하에서 제작된 시편으로 수지의 입자 크기 및 분자량에 따른 PMMA에 기초한 틀니용 수지의 기계적 물성 변화를 관찰하였다. 그 결과 평균입자 크기가 100 $\mu$m 이하에서는 분자량이 커질수록 기계적 물성이 높게 나타났으며, 그 이상인 영역에서는 분자량에 상관없이 입자 크기가 증가할수록 기계적 물성의 저하 현상이 관찰되었다. 아울러 중합시 교반속도와 PVAL의 농도를 조절하여 크기와 분자량을 조절 가능하였는데, P/L 부피비가 2인 조건에서 제조된 열경화성 틀니용 수지로 이용되는 입자의 평균크기는 100 $\mu$m 정도가 적절하며, 분자량은 3.0${\times}$$10^{5}$ 전후가 적절함을 알 수 있었다.다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.632-635
• /
• 2003

원자력 발전소에서 배출되고 있는 방사성 폐기물의 운반 및 처분과 관련하여 규제가 예상되는 대상 핵종을 선정하고, 특히 방사능 계측기로 직접 측정이 불가능한 드럼 내 방출핵종에${\alpha}{\cdot}{\beta}$ 대한 농도 예측과 검증방법에 관한 연구가 진행되고 있다. 본 연구에서는 $\beta$방출 핵종이면서 반감기가 매우 긴 $^129I(t_{1/2}=1.57{\times}10^7)$의 정량을 위하여 모의 폐기물 중에 함유되어 있는 요오드의 분리 및 회수율을 측정하였다. 모의 폐기물중 가용성 및 난용성 시료의 전처리 방법으로 혼합산 분해법과 알칼리 용융방법을 각각 이용하였으며 두 방법에 대한 요오드의 회수율을 비교하였다. 요오드의 측정방법으로 이온 크로마토그라피를 이용하였으며 매질의 음이온성분에 의한 영향은 없었다. 두 방법의 전체 공정에서 혼합산분해에 의한 요오드의 회수율은 76.7 (RSD 1.7%)이고 알칼리용융에 의한 방법에서 모직물의 경우에는 74.3(RSD 2.2%)이고 Resin의 경우 56.5(5.6%)로 각각 나타났다.

• Corrosion Science and Technology
• /
• 제7권5호
• /
• pp.269-273
• /
• 2008

It is known that the fluoric resin has the most outstanding properties in the extremely acidic environment of high temperature. However, this resin is the thermal hardening type that needs long time heat treatments above $250^{\circ}C$. It's impossible to use in situ in the extremely acidic environment such as a huge FGD ductworks or industrial chemical tanks. Furthermore, even the natural hardening type fluoric coatings which can be hardened less than $120^{\circ}C$ can not be applied to the highly acidic environmental plants because of its chemical resistance. In this study, new fluoric coatings that has excellent thermal resistance, chemical resistance and corrosion resistance has been developed in order to solve above problems and to be applied to the large plant structures in the field. These newly developed coatings are organic and inorganic composite type that have fluoric rubber(100 wt%), fluoric resin(5~50 wt%), oxalates(5~30 wt%), inorganic fillers mixed with plate-type and bulk-type solids(20~150 wt%), hardeners(0.5~5 wt%), and hardening hasteners(0.1~3 wt%). The best chemical and physical properties of these coatings are acquired by variation of adhesive reinforcement agents, dispersants, leveling agents. Mixing ratios of plate-type and bulk-type inorganic fillers influence the thermal properties, abrasive resistance and chemical infiltration properties of coatings. The mixing control is also very important to have homogeneous surface and removing inner voids of coatings.

• The Journal of Advanced Prosthodontics
• /
• 제7권6호
• /
• pp.446-453
• /
• 2015

PURPOSE. To compare the push-out bond strength of feldspar and zirconia-based ceramic inlays bonded to dentin with different resin cements following simulated aging. MATERIALS AND METHODS. Occlusal cavities in 80 extracted molars were restored in 2 groups (n=40) with CAD/CAM feldspar (Vitablocs Trilux forte) (FP) and zirconia-based (Ceramill Zi) (ZR) ceramic inlays. The fabricated inlays were luted in 2 subgroups (n=20) with either etch-and-bond (RelyX Ultimate Clicker) (EB) or self-adhesive (RelyX Unicem Aplicap) (SA) resin cement. Ten inlays in each subgroup were subjected to 3,500 thermal cycles and 24,000 loading cycles, while the other 10 served as control. Horizontal 3 mm thick specimens were cut out of the restored teeth for push out bond strength testing. Bond strength data were statistically analyzed using 1-way ANOVA and Tukey's comparisons at ${\alpha}=.05$. The mode of ceramic-cement-dentin bond failure for each specimen was also assessed. RESULTS. No statistically significant differences were noticed between FP and ZR bond strength to dentin in all subgroups (ANOVA, P=.05113). No differences were noticed between EB and SA (Tukey's, P>.05) bonded to either type of ceramics. Both adhesive and mixed modes of bond failure were dominant for non-aged inlays. Simulated aging had no significant effect on bond strength values (Tukey's, P>.05) of all ceramic-cement combinations although the adhesive mode of bond failure became more common (60-80%) in aged inlays. CONCLUSION. The suggested cement-ceramic combinations offer comparable bonding performance to dentin substrate either before or after simulated aging that seems to have no adverse effect on the achieved bond.

• 대한기계학회논문집
• /
• 제16권5호
• /
• pp.838-848
• /
• 1992

본 연구에서는 김성호등의 형상모델인 Fig.1(b)에서 전단하중이 작용하는 경 우에 대한, 복합재료의 탄성층 내부(레진층)에 존재하는 중앙균열의 응력확대계수 산 출을 위하여 균열부위를 제외하고는 섬유층과 레진층이 완전히 접착되었다고 가정한 모델을 다음과 같이 설정 하였다. 접착레진을 주로하는 탄성층(resin rich layer)을 중심으로 상하 각1개의 섬유층(fiber rich layer)과 균질한 특성을 갖는 복합재료의 층으로 단순화하였으며, 복합재료는 레진층이나 섬유층에 비하여 무한히 두꺼우므로 반무한체로 이상화 하였다. 선형탄 이론에 의한 혼합경계조건문제(mixed boundary value problem)로 부터 제2종 Fredholm 적분방정식(fredholm integral equation of a second kind)을 유도하였으며 수치해석적인 방법에 의하여 응력확대계수를 구하였다. 또한, 복합재료의 재료물성 및 균열길이, 섬유두께등이 기하학적 변수에 대하여 응력 확대계수를 산출하였다.

• 한국자동차공학회논문집
• /
• 제14권5호
• /
• pp.39-46
• /
• 2006

The fuel cell is one of promising environment-friendly energy sources for the next generation. The bipolar plate is a major component of the PEM fuel cell stack, which takes a large portion of stack cost. In this study, as alternative materials for bipolar plate of PEM fuel cells, graphite composites were fabricated by compression molding. Graphite particles mixed with epoxy resin were used as the main substance to provide electric conductivity To achieve desired electrical properties, specimens made with different mixing ratio, processing pressure and temperature were tested. To increase mechanical strength, one or two layers of woven carbon fabric were added to the graphite and resin composite. Thus, the composite material was consisted of three phases: graphite particles, carbon fabric, and epoxy resin. By increasing mixing ratio of graphite, fabricated pressure and process temperature, the electric conductivity of the composite was improved. The results of tensile test showed that the tensile strength of the two-phase graphite composite was about 4MPa, and that of three-phase composite was increased to 57MPa. As surface properties, contact an91e and surface roughness were tested. Graphite composites showed contact angles higher than $90^{\circ}$, which mean low surface energy. The average surface roughness of the composite specimens was $0.96{\mu}m$.

• Restorative Dentistry and Endodontics
• /
• 제29권6호
• /
• pp.498-503
• /
• 2004

The properties of ideal root canal sealers include the ability of sealing the total root canal system and no toxic effects to periradicular tissues. Cytotoxicity test using cell culture is a common screening method for evaluation of the biocompatibility of root canal sealers. The purpose of this study was to investigate the cytotoxic effect of newly developed resin-based sealer (Adseal 1, 2, and 3) comparing with those commercial resin-based sealers (AH26 and AH Plus), ZOE-based sealers (Tubliseal EWT, Pulp Canal Sealer EWT) and calcium hydroxide based sealer (Sealapex), An indirect contact test of cytotoxicity by agar diffusion was performed according to the international standard ISO 10993-5. L929 fibroblast cells were incubated at $37^{\circ}C$ in humidified 5% $CO_2-containing$ air atmosphere. The freshly mixed test materials were inserted into glass rings of internal diameter 5 mm and height 5 mm placed on the agar. After the 24 hrs incubation period, the decolorization zones around the test materials were assessed using an inverted microscope with a calibrated screen. A Decolorization Index was determined for each specimen. Adseal 1. 2, and 3 did not exert any cytotoxic effects, whereas AH26, AH Plus, Tubliseal EWT, Pulp Canal Sealer EWT, and Sealapex produced mild cytotoxicity.

• The Journal of Advanced Prosthodontics
• /
• 제14권5호
• /
• pp.315-323
• /
• 2022

PURPOSE. The purpose of this study was to investigate the effect of barium silicate filler contents on mechanical properties of resin nanoceramics (RNCs) for additive manufacturing (AM). MATERIALS AND METHODS. Additively manufactured RNC specimens were divided into 4 groups depending on the content of ceramic fillers and polymers: 0% barium silicate and 100% polymer (B0/P10, control group); 50% barium silicate and 50% polymer (B5/P5); 60% barium silicate and 40% polymer (B6/P4); 67% barium silicate and 33% polymer (B6.7/P3.3). The compressive strength (n = 15) and fracture toughness (n = 12) of the specimens were measured, and scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS) analyses were performed. Independent sample Kruskal-Wallis tests were performed on the compressive strength and fracture toughness test results, and the significance of each group was analyzed at the 95% confidence interval through post-tests using the Bonferroni's method. RESULTS. B6/P4 and B6.7/P3.3 exhibited much higher yield strength than B0/P10 and B5/P5 (P < .05). Compared to the control group (B0/P10), the other three groups exhibited higher ultimate strength (P < .05). The fracture toughness of B6/P4 and B6.7/P3.3 were similar (P > .05). The content of barium silicate and fracture toughness showed a positive correlation coefficient (R = 0.582). SEM and EDS analyses revealed the presence of an oval-shaped ceramic aggregate in B6/P4 specimens, whereas the ceramic filler and polymer substrate were homogeneously mixed in B6.7/P3.3. CONCLUSION. Increasing the ceramic filler content improves the mechanical properties, but it can be accompanied by a decrease in the flowability and the homogeneity of the slurry.

• Restorative Dentistry and Endodontics
• /
• 제48권3호
• /
• pp.26.1-26.12
• /
• 2023

Objective: This in vitro study aimed to evaluate the effects of different whitening toothpastes on a composite resin during at-home bleaching with 10% carbamide peroxide. Materials and Methods: Sixty samples (7 mm × 2 mm) were used for color and roughness analyses, while another 60 samples (3 mm × 2 mm) were utilized to assess microhardness. The factors analyzed included toothpaste, for which 5 options with varying active agents were tested (distilled water; conventional toothpaste; whitening toothpaste with abrasive agents; whitening toothpaste with abrasive and chemical agents; and whitening toothpaste with abrasive, chemical, and bleaching agents). Brushing and application of whitening gel were performed for 14 days. Surface microhardness (SMH), surface roughness (Ra), and color (ΔL^*, Δa^*, Δb, ΔE^*_ab, and ΔE₀₀) were analyzed. The Ra and SMH data were analyzed using mixed generalized linear models for repeated measures, while the color results were assessed using the Kruskal-Wallis and Dunn tests. Results: Between the initial and final time points, all groups demonstrated significant increases in Ra and reductions in SMH. No significant differences were found between groups for SMH at the final time point, at which all groups differed from the distilled water group. Conventional toothpaste exhibited the lowest Ra, while whitening toothpaste with abrasive agent had the highest value. No significant differences were observed in ΔL^*, Δa^*, and Δb. Conclusions: While toothpaste composition did not affect the color stability and microhardness of resin composite, combining toothbrushing with whitening toothpaste and at-home bleaching enhanced the change in Ra.