• 한국산학기술학회논문지
• /
• 제7권4호
• /
• pp.727-732
• /
• 2006

본 연구에서는 전해질 성분 및 농도, 이온교환 수지 조성비율을 통해 이온교환 수지탑의 성능을 평가하고, 이온교환 수지에 의한 입자성 물질 제거의 능력과 입자성 물질이 이온교환 특성에 미치는 영향을 조사하였다. 이온교환 수지탑 배열 순서에 따라 파과(돌파)시점이 연장되며, 파과(돌파)순서는 음이온의 경우 $Cl^{-}, 양이온의 경우 $Na^{+} 순 이였으며, 전해질의 농도가 증가할수록 파과시간이 단축되었다. 이온교환 수지의 조성비 변화에서는 양음이온교환 수지 조성비가 1:2의 경우 1:1및 1:3의 경우보다 파과(돌파)시간이 연장되었으며 동일한 전해질 농도에서 입자 농도가 증가하면 20% 미만으로 파과(돌파)시간이 단축되었다. 양이온 교환수지 비율이 높으면 양이온의 파과(돌파)시점이 늦어져 이온교환 수지탑의 수명이 연장되고, 입자성 물질은 전해질 농도와 무관하게 이온교환 수지의 세공을 막아 이온교환 용량을 감소시켜 파과(돌파)시간을 단축시키는 것으로 조사되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제33권3호통권131호
• /
• pp.30-37
• /
• 2005

톱밥과 왕겨를 혼합하여 보드를 제조한 후 페놀수지에 함침율 40~70%로 함침한 후 소성온도 $600{\sim}1200^{\circ}C$에서 소성하여 혼합세라믹을 제조한 다음 수지함침율과 소성온도에 따른 혼합세라믹의 밀도변화, 중량 및 치수감소율과 휨강도를 조사하였다. 수지함침율이 증가함에 따라 소성 후 두께 및 중량 감소율은 감소하였고 밀도와 휨강도는 증가하였다. 소성온도가 증가함에 따라 소성 후 길이, 두께 및 중량 감소율은 증가하였고 밀도는 소성온도 $800^{\circ}C$까지는 증가하다가 $1200^{\circ}C$ 에서는 약간 감소하였다.

• 한국지반환경공학회 논문집
• /
• 제16권3호
• /
• pp.35-39
• /
• 2015

Dowex 21K XLT 수지를 이용하여 산업폐수 내에 존재하는 금과 납-시안 착화합물에 대한 연속흡착 및 회수 특성을 조사하였다. 충전층에 충진된 Dowex 21K XLT 수지는 0.5mL/min의 유입유속에서 금-시안 착화합물을 520 bed volume까지 95% 이상 연속적으로 제거할 수 있지만, 납-시안 착화합물은 전혀 제거할 수 없었다. Dowex 21K XLT 수지에 흡착된 금-시안 착화합물은 HCl과 Acetone을 7:3의 비율로 섞은 혼합액을 탈착제로 이용하였을 때, 8 bed volume 내에서 96% 탈착되어졌다. 또한 두 번 재사용된 Dowex 21K XLT 수지의 금-시안 착화합물에 대한 bed volume이 490을 유지하여 향후 금 이온을 포함하고 있는 산업폐수 처리공정에 충분히 적용될 수 있을 것으로 판단된다.

• The Journal of Advanced Prosthodontics
• /
• 제12권4호
• /
• pp.197-203
• /
• 2020

PURPOSE. The aim of this study was to evaluate the effect of multiple firings on the bond strength between yttriatetragonal zirconia polycrystals (Y-TZP) and 2 types of resin cements. MATERIALS AND METHODS. Sixty 3Y-TZP specimens (LAVA Frame Multi) were divided into 3 groups depending on the following firing procedures: (1) 2-firing cycles, (2) 5-firing cycles, (3) 10-firing cycles. Two samples from each group were investigated by using SEM to determine the morphological changes. All specimens were treated with 125 ㎛ airborne-particle abrasion and the surface roughness of each specimen was measured. The specimens from each firing group were then further divided into 2 subgroups (n = 9) to apply 2 types of resin cement (MDP-free resin cement: RelyX Unicem-RU, and MDP containing resin cement: Panavia F 2.0-PA). The shear bond strength (SBS) test was performed and failure types of all the debonded specimens were classified by using a stereomicroscope as adhesive, cohesive, and mixed. The statistical analysis of surface roughness and SBS data were performed by using 1-way ANOVA and 2-way ANOVA followed by Tukey-HSD tests (α=.05). Failure modes were calculated as a percentage for each group. RESULTS. The bond strength of RU and PA to the specimens obtained with 2 firings were not statistically different from each other (P=.1). However, the SBS values of PA were found to be significantly higher than RU for the specimens obtained with 5 and 10 firing cycles (P=.001 and P=.02, respectively). Surface roughness analysis revealed no statistical difference between groups (P=.2). The SEM analysis of samples fired 5- and 10- times showed irregularities and boundary loss in zirconia grains, and empty spaces between zirconia grains. CONCLUSION. The bond strength of PA cement was higher than that of RU to the zirconia subjected to repeated firings (5 and 10 firing cycles). When zirconia is subjected to multiple firings, using MDP-containing resin cement can be recommended.

• The Journal of Advanced Prosthodontics
• /
• 제1권1호
• /
• pp.41-46
• /
• 2009

STATEMENT OF PROBLEM. The poor chemical bonding of a denture base resin to cast titanium framework often introduces adhesive failure and increases microleakage. PURPOSE. This study evaluated the shear bond strengths of a heat cure denture base resin to commercially pure titanium, Ti-6Al-4V alloy and a cobalt-chromium alloy using two adhesive primers. MATERIAL AND MATHODS. Disks of commercially pure titanium, Ti-6Al-4V alloy and a cobalt-chromium alloy were cast. Specimens without the primer were also prepared and used as the controls. The shear bond strengths were measured on a screw-driven universal testing machine. RESULTS. The primers significantly(P < .05) improved the shear bond strengths of the heat cure resin to all metals. However, the specimens primed with the Alloy $primer^{(R)}$(MDP monomer) showed higher bond strength than those primed with the MR $bond^{(R)}$(MAC-10 monomer) on titanium. Only adhesive failure was observed at the metal-resin interface in the non-primed specimens, while the primed specimens showed mixed failure of adhesive and cohesive failure. CONCLUSIONS. The use of appropriate adhesive metal primers makes it possible not only to eliminate the need for surface preparation of the metal framework before applying the heat cure resins, but also reduce the need for retentive devices on the metal substructure. In particular, the Alloy $primer^{(R)}$, which contains the phosphoric acid monomer, MDP, might be clinically more acceptable for bonding a heat cure resin to titanium than a MR $bond^{(R)}$, which contains the carboxylic acid monomer, MAC-10.

• 농업생명과학연구
• /
• 제46권2호
• /
• pp.43-48
• /
• 2012

거대억새 자원의 활용도 제고방안의 일환으로 거대억새 파티클을 이용하여 보드를 제조하고 수지첨가량, 수지타입 및 밀도에 따른 물성을 검토하였다. 흡수율은 보드의 밀도 및 수지첨가량이 증가할수록 감소하였으며, 휨강도와 박리강도는 밀도 및 수지 첨가량이 증가할수록 파티클간 결합력이 강해져 증가하였다. 두께 팽창률은 보드의 밀도가 증가함에 따라 증가하였고 수지 첨가량이 많을수록 감소하였다. 수지타입에 따라 두께 팽창률과 흡수율은 액상 페놀수지로 제조한 보드가 더 나은 치수안정성을 보였고, 보드밀도 $0.4g/cm^3$ 로 제조한 경우 수지 첨가율 11~13% 일 때 휨강도는 분말상 및 액상 페놀수지 간에 차이가 없었으며, 박리강도는 액상의 페놀수지로 제조한 보드가 더 좋은 값을 나타내었다.

• 대한치과보철학회지
• /
• 제45권4호
• /
• pp.457-468
• /
• 2007

Statements of problem: The fracture of acrylic resin dentures remains an unsolved problem. Therefore, many investigations have been performed and various approaches to strengthening acrylic resin, for example, the reinforcement of heat-cured acrylic resin using glass fibers, have been suggested over the years. Silane is important for bonding between glass fiber and resin. Purpose: The aim of the present study was to investigate the effect of various silane on the strength of PMMA resin and roughness of resin-glass fiber complex after abrasion test. Material and methods: 3mm glass fiber (Chopped strand, Hankuk fiber Co., Milyang, Korea) was treated with 3 kinds of silane (MPS, EPS, APS) (Sila-ace, Chisso chemical, Tokyo, Japan) and mixed with PMMA resin(Vertex RS, Vertex Dental B.V., Zeist, Netherlands). Transverse strength and Young's modulus was measured using Instron (Instron model 4466, Instron, Massachusetts, USA). After abrasion test (The 858 Mini Bionix II Test System, MTS System Co., Minnesota, USA) surface roughness was evaluated using tester (Form Talysurf plus, Taylor Hopson Ltd., Leicester England). Examination of scanning electron microscope was also performed. Results: Within this study, the following conclusions were drawn. 1. Surface treatment of glass fiber with MPS and APS increased transverse strength of PMMA resin complex, but surface treatment with EPS decreased transverse strength of PMMA resin complex (p<0.05). 2. Silane treated glass fiber increased Young's modulus of PMMA resin complex compared to desized glass fiber (p<0.05). 3. Roughness increased after abrasion test in case of PMMA resin reinforced with desized glass fiber (p<0.05). 4. Roughness change was not observed after abrasion test in case of PMMA resin reinforced with silane treated glass fiber (p>0.05).

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.191-195
• /
• 2003

Zinc acetate has been proposed and used to evaluate ionic zinc as a means to reduce reactor radiation buildup at several nuclear plants. Thermodynamic analysis of the aqueous zinc system using reliable data shows that the stability of the hydrolyzed zinc species increases with pH and temperature. Adsorption kinetics and isotherm studies were carried out to investigate the mixed resin performance of the zinc adsorption. The equilibrium isotherms of the zinc adsorption onto nuclear grade resin indicate that the data correlate well with the Langmuir model and that the adsorption is physical in nature. The maximum capacity according to the Langrnuir model is about 0.6meq/g for an initial zinc concentration of 100ppm at $50^{\circ}C$. The use of natural zinc could result in the generation of a $^{65}Zn$ activity with about $500{\mu}Ci/mL$ of resin after 12 months of operation.

• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.423-430
• /
• 1993

The purpose of this study was to investigate the effect of ferric and ferric ions contained in phosphoric acid solution as a pretreatment solution on bonding of MMA/TBBO resin to dentin. Each of 1 % and 3 % ferric chloride. cupric chloride. cupric sulfate. and cupric nitrate was mixed into 10% phosphoric acid solution and pretreated dentin surface of bovine anterior teeth for 30 seconds followed- by water rinse and dry. Tensile bond strength was determined after bonding of pretreated dentin with MMA/TBBO resin by use of brush-on ;technique and storing for 24 hours in 3it distilled water. The amount of cupric ions adsorbed on pretreated dentin surface was detected by Wave-Dispersion X-ray microanalyzer for different groups of each pretreatment solution containing cupric salts. The pretreatment with cupric ions contained in 10% phosphoric acid solution was effective to increase bonding strength of MMA/TBBO resin to dentin but not in case of ferric ions. The pretreatment with 3 % cupric chloride and cupric nitrate both enhanced significant increase in bonding strength compared to the control group of 10% phosphoric acid solution(p<0.05). Cupric ions measured in pretreated dentin surface was higher in 3 % cupric chloride group than in 1% cupric chloride group, but couldn't find distinct relationship from the results of this experiment between the amount of adsorbed cupric ions according to the kind of cupric salts and the bonding strength value.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.460-465
• /
• 2013

Plate-shaped inorganic particles are coated onto a stainless steel substrate by the electrophoretic deposition of a precursor slurry which includes the inorganic particles of $Al_2O_3$ and polymer resin in mixed solvents to mimic the abalone shell structure, which is a composite of plate-shaped inorganic particles and organic interlayer binding materials with a layered orientation. The process parameters of the electrophoretic deposition include the voltage, coating time, and conductivity of the substrate. In addition, the suspension parameters are the particle size, concentration, viscosity, conductivity, and stability. We prepared an organic-inorganic composite coating with a high inorganic solid content by arraying the plate-shaped $Al_2O_3$ particles and electrophoretic resin via an electrophoretic deposition method. We analyzed the effect of the slurry composition and the electrophoretic deposition process parameters on the physical, mechanical and thermal properties of the coating layer, i.e., the thickness, density, particle orientation, Young's modulus and thermogravimetric analysis results.