• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.152-158
• /
• 2005

The stress conditions acting on the practical structure are complex, and thus most cracks existing in the practical structures are under mixed-mode loading conditions. The effect of shear load component of mixed-mode loading acts more greatly in the stage of crack initiation and initial propagation than crack propagation stage. Hence, research on the behavior in the stage of crack initiation and initial propagation need to be examined in order to evaluate behavior of mixed-mode fatigue cracks. In this study, the crack tip displacement(CTD) was measured by using the direct measuring method(DMM). We examined the behavior at crack tip by determining crack opening load$(P_{op})$. From the test results, the propagation behavior of mixed-mode fatigue cracks was evaluated by considering mixed-mode crack closure. Also, we examined the characteristic of crack propagation under mixed-mode loading with crack propagation direction.

• 지질공학
• /
• 제17권3호
• /
• pp.425-434
• /
• 2007

본 연구에서는 석분슬러지 혼합토를 복구토로 활용할 경우 조성되는 매립사면의 안정성 기준을 마련하였다. 이를 위하여 먼저 석분슬러지와 원지반토의 혼합비율을 5가지로 구분하고 각각에 대한 토질시험을 실시하였다. 실험결과 석분슬러지의 혼합비율이 감소할수록 전단강도 및 최대건조단위중량이 증가하는 경향을 나타내었다. 성토사면에 대한 국내외의 사면안전율 기준에 대한 조사를 토대로 석분슬러지 혼합토 매립사면의 사면안정등급을 불안정, 주의 및 안정의 3단계로 구분하였다. 석분슬러지 혼합토 매립사면에 대한 사면안정해석을 실시하여 안전한 사면높이, 사면경사 및 석분슬러지 혼합비율을 제안하였다. 매립사면에 대한 사면안정해석결과 석분슬러지 혼합토 성토사면의 사면높이를 10 m로 할 경우 사면경사는 1 : 1.8 이상 되도록 매립하여야 안정함을 알 수 있다. 그리고 사면높이를 15 m로 할 경우 석분슬러지 함유율이 50%이하로 하고 사면경사는 1 : 1.8 이상 되도록 매립하여야 안정함을 알 수 있다. 사면경사, 사면높이 및 석분슬러지 함유율이 동일한 조건일 경우 채석현장 내부의 절취암반에 접하여 매립된 사면과 평지에 성토하여 매립된 사면의 사면안정해석결과는 유사함을 알 수 있다. 이와 같은 석분슬러지 혼합토 매립사면의 안정성 기준은 채석현장에서 실무적으로 이용할 수 있을 것으로 판단된다.

• 펄프종이기술
• /
• 제39권1호
• /
• pp.48-55
• /
• 2007

The aim of this article is to review the general property of the famous traditional Korean paper, "rice straw paper"(Bast-Fiber mixed with straw pulp), and to compare the paper qualities varying with the composition ratio of straw pulp, in order to revive the traditional paper in modem Korea. The experiment was carried out by making first the two different mixture papers, i. e., one is the paper of 50% bast fiber mixed with 50% straw pulp, and the other is the paper of 75% bast fiber with 25% oats straw pulp, and finally the 100% bast fiber paper was made for the purpose of comparison. The qualitative properties of these three kinds of paper with the different mixing ratio of the straw pulp were evaluated, and the findings of the experiment can be summarized as follow: 1. As to the quality aspects of the paper strength like tensile strength, breaking length, elongation, and tear strength, the test proved the 100% bast fiber paper as best, and the 50% mixed paper as the next good one. 2. In aspect of the printing adaptability such as density, opacity, brightness, whiteness, lab colors, air permeability, and roughness, the 50% mixed paper proved to be the best, due to the short cells in the straw pulp. 3. As to the air permeability, the larger ratio of straw pulp was found to be the lesser, and 75% bast fiber with 25% straw pulp mixture paper and the 100% bast fiber one were found 1/5 degree efficient. 4. In terms of the water absorption degree, 100% bast fiber paper was the fastest, but in case of mixture paper, 50% mixed one was a little faster up to the point of 1cm, while the two kinds of mixed ones appear to be almost similar to each other beyond the point. 5. The straw pulp mixed paper, especially the 50% mixed one was evaluated as the highest by the calligraphers who had experienced using the papers in terms of movement and feeling of the caligraphy and painting. In addition, although the 25% mixed paper is judged to be good for book printing because of the strength, the 50% mixed paper can be thought to be more desirable for painting and calligraphy. In conclusion, we will be able to make the quality paper with durability, by mixing the straw pulp with the bast fiber in proper ratio, following the tradition of Korean paper making.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 가을 학술발표회 논문집
• /
• pp.54-57
• /
• 1992

This report presents the survey findings on the proportioning of ready mixed, concrete mixtures. According to this report, the W/C ratio and S/A ratio, based upon the type 25-210-12, in mix proportion of ready mixed concrete are 53% and 45% respectively. The problems to be improved, coming out in this study, are (1)using the adequate quantity of cement (2) alternation of mix design cope with the change of kinds of aggregates (3)large standard error in the mix proportion.

• 전기학회논문지
• /
• 제67권11호
• /
• pp.1463-1470
• /
• 2018

In this study, 20 types of samples were prepared by mixing different kinds of inorganic materials to develop insulation materials for epoxy - based GIS substation equipment used under high voltage environmentally friendly insulation gas. One of the electrical characteristics, AC insulation breakdown experiment was performed. As mixing ratio of mixed heterogeneous inorganic materials, the dielectric breakdown strength was increased with increasing filler ratio of micro silica, micro silica : micro Alumina, 1:9, 3:7, 5:5, 7:3, 9:1, and decreased as the filling amount of micro alumina increased. The AC insulation breakdown characteristics were the best when the composition ratio was 9:1. The higher the content of silica, the better the interfacial properties, and the larger the alumina content ratio, the worse the interfacial properties.

• 식물병연구
• /
• 제20권2호
• /
• pp.95-100
• /
• 2014

본 연구는 에스필과 수산화동의 혼용에 의한 오이, 토마토, 고추의 흰가루병에 대한 방제 효과를 구명하고자 수행하였다. 오이 흰가루병에서 에스필과 수산화동의 혼용 처리는 4 : 1 혼용처리구에서 발병엽률 18.9%와 방제효과 69.9%, 8 : 1 혼용 처리구에서 발병엽률 18.1%와 방제효과 71.1%로 가장 효과적이었다. 토마토 흰가루병에서 에스필과 수산화동의 혼용 처리는 4 : 1 혼용 처리구에서 발병엽률 12.4%와 방제효과 85.3%, 8 : 1 혼용 처리구에서 발병엽률 14.3%와 방제효과 83.0%로 가장 효과적이었다. 고추 흰가루병에서 에스필과 수산화동의 혼용 처리는 4 : 1 혼용 처리구에서 발병엽률 17.7%와 방제효과 76.4%로 가장 효과적이었다. 이상의 결과를 종합할 때 에스필과 수산화동 혼용처리에 의한 오이와 토마토 흰가루병에 대한 방제 효과는 4 : 1 혹은 8 : 1 혼용 처리가 가장 효과적이고, 고추 흰가루병에서는 4 : 1 혼용 처리가 가장 효과적인 방제 방법으로 구명되었다.

• 한국통신학회논문지
• /
• 제36권9B호
• /
• pp.1039-1048
• /
• 2011

Carrier Ethernet, which extend The algorithm based on constructing the mixed topology and performing link stretching, MT/s, has been proposed for designing cost-efficient Carrier Ethernet in optical network with multi-line-rate. However, the MT/s algorithm has high blocking ratio because the wavelength capacity is fully allocated without considering the load balance of network. In this paper, we propose an efficient mixed topology configuration (EMTC) algorithm by modifying MT/s algorithm. In order to reduce blocking ratio, we adapt a threshold for each link to restrict the link utilization so that traffic load can be distributed over whole network. We also apply the EMTC algorithm into optical hybrid switched network to evaluate the availability of our algorithm for different applications. The performance of the EMTC algorithm is compared with that of MT/s algorithm through OPNET simulation. The simulation results show that our algorithm achieve lower blocking ratio than the MT/s algorithm. Moreover, in hybrid switched network, our algorithm performs better than MT/s algorithm in terms of packet loss ratio and end-to-end delay.

• 한국세라믹학회지
• /
• 제27권7호
• /
• pp.851-860
• /
• 1990

The hydrolysis-precipitation reaction of mixed aluminum salt solutions of aluminum sulfate, aluminum nitrate, and urea has been investigated to obtain narrow-sized and unagglomerated fine spherical precipitates of aluminum hydroxide required for coating core particles. The hydrolysis-precipitatin reaction could be controlled to be appropriate to coating processes by usign urea as a pH control-agent. As the concetration of total Al3+ ion and the molar ratio of SO42-/Al3+ in starting solutions became smaller and also as the vol. ratio of water/solution for hydrolyzing mixed aluminum salt solution became larger, the morphology of precipitates tended to be more unagglomerated and spherical, while their size(0.5longrightarrow0.05${\mu}{\textrm}{m}$) to be smaller. The optimum hydrolysis condition for coating processes was to hydrolyze the mixed aluminum salt solution, in which the molar ratio of SO42-/Al3+ was 0.75, while the amount of water corresponding to the vol. ratio of water/solution of 15. The precipitate was the aluminum hydroxide which sulfate ions were strongly adsorbed on and the maximum yield in the hydrolysis-precipitation reaction was about 20%.

• 한국응용과학기술학회지
• /
• 제25권3호
• /
• pp.363-369
• /
• 2008

In the present work, the choice of the nano carbon black and optimum mixed ratio and effectiveness of the mixed carbon black to get a raw data for a manufacturing method of conductive complex board. Optimum mixed ratio of paper sludge & water was 1 : 2.5 for reformations. HB-41-Y was cheaper than Super-P with the single carbon black. Also electric conductivity of HB-41-Y($6.406{\times}10^{-2}\;{\Omega}cm^{-1}$) was about 6.5 times higher than Super-P($9.741{\times}10^{-3}\;{\Omega}cm^{-1}$) at 20 wt% carbon black. This time optimum mixture ratio of the paper sludge and the carbon black to be about 15 wt%, optimum mixed ratio HB-41Y and Graphite about 3:1 and its electric conductivity was $5.824{\times}10^{-2}\;{\Omega}cm^{-1}$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.323-323
• /
• 2010

Saw damage of crystalline silicon wafer is unavoidable factor. Usually, alkali treatment for removing the damage has been carried out as the saw damage removal (SDR) process for priming the alkali texture. It usually takes lots of time and energy to remove the sawed damages for solar grade crystalline silicon wafers We implemented two different mixed acidic solution treatments to obtain the improved surface structure of silicon wafer without much sacrifice of the silicon wafer thickness. At the first step, the silicon wafer was dipped into the mixed acidic solution of $HF:HNO_3$=1:2 ration for polished surface and at the second step, it was dipped into the diluted mixed acidic solution of $HF:HNO_3:H_2O$=7:3:10 ratio for porous structure. This double treatment to the silicon wafer brought lower reflectance (25% to 6%) and longer carrier lifetime ($0.15\;{\mu}s$ to $0.39\;{\mu}s$) comparing to the bare poly-crystalline silicon wafer. With optimizing the concentration ratio and the dilution ratio, we can not only effectively substitute the time consuming process of SDR to some extent but also skip plasma enhanced chemical vapor deposition (PECVD) process. Moreover, to conduct alkali texture for pyramidal structure on silicon wafer surface, we can use only nitric acid rich solution of the mixed acidic solution treatment instead of implementing SDR.