• Applied Biological Chemistry
• /
• v.42 no.1
• /
• pp.20-28
• /
• 1999

To improve Bacillus strains producing biopolymer, conditions for protoplast formation and regeneration were investigated in biopolymer producing Bacillus subtilis K-1 and lactose utilizing Bacillus coagulans. Bacillus subtilis K-1 mutant (SM-2) and Bacillus coagulans mutants (CM-12) were marked auxotrophic and antibiotics-resistant (SM-2) and an antibiotics-resistant mutants, respectively. To formate protoplasts derived from the mutants, conditions were established as follows. For B. subtilis mutant SM-2, its culture in mid-logarithmic phase was added with penicillin G (1.0 unit/ml) and further reacted for 1.5 hr. Cells were collected and then treated in lysis fluid (pH 7.0) containing 0.4 M sucrose and lysozyme $25\;{\mu}g/ml$ for 40 min at $37^{\circ}$. Protoplast formation was very successful (99.6%) and the ratio of cell wall regeneration was 2.4%. For Bacillus coagulans mutant CM-12, its mid-logarithmic phase culture was treated with penicillin G (0.3 unit/ml) and glycine (0.5%) for 1hr. Cells were collected and then resuspended in lysis buffer (pH 7.0) containing 0.6 M lactose and lysozyme $(300\;{\mu}g/ml)$ for 30 min at $37^{\circ}$. Protoplast formation was also successful (90.8%) and cell wall regeneration ratio was similar to SM-2 (2.2%). To improve regeneration frequency, regeneration medium was obtained as followed condition,. Cell wall regeneration was improved 2-4 folds with 5.1% for B. subtilis SM-2 and 10.3% for B. coagulans CM-12 when protoplasts mixed with soft top agar(0.4%) was overlaid onto trypticase soy broth medium containing 0.4 M sucrose, 0.7% casamino acid, 1% PVP, 25 mM $MgCl_2,\;25\;mM\;CaCl_₂$ and 1.5% agar.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.707-714
• /
• 2005

Ingredient ratio for making nabak kimchi and the manufacturing method were standardized from the available literatures. Fermentation properties and $CO_2$ production of the nabak kimchi were investigated during the fermentation at $5^{\circ}C,\;10^{\circ}C,\;and\;20^{\circ}C$. Standardized ingredients ratio of nabak kimchi that added 100 mL of water was as follows: 45.0 g baechu cabbage, 26.9 g radish, 1.9 g green onion, 1.0 g red pepper, 1.2 g crushed garlic, 0.9 g crushed ginger, 0.7 g red pepper powder. The standardized manufacturing method of nabak kimchi was as follows: washing ingredients, cutting radish and baechu cabbage $(2.5\times2.5\times0.5\;cm)$, salting for 20 min, washing and draining, pretreatment of ingredients, dissolving red pepper powder in water, blending, mixing, and adding the water to the mixed ingredients. Fermentations at $5^{\circ}C$ for 8 days, at $10^{\circ}C$ for 3 days, and at $20^{\circ}C$ for 1 day led to the acidity levels of $0.21\%,\;0.20\%,\;and\;0.31\%$, respectively. From the relationships between optimally ripened pH and acidity, nabak kimchi showed lower acidity of $0.20\~0.25\%$ with pH $4.2\~4.5.$ Like other kinds of kimchi, the Levels of Leuconostoc sp. were high specially at later stage of fermentation at low temperature $(5^{\circ}C)$. However, the levels of Lactobacillus sp. were low at $5^{\circ}C$. Nabak kimchi produced high levels of $CO_2$ in the initial fermentation period and followed by rapid decrease of $CO_2$ production with the fermentation. From the relationships between pH and $CO_2$ content, the highest $CO_2$ contents were found pH $4.0\~4.4$, 3.8 and 3.4 at $5^{\circ}C,\;10^{\circ}C$, and $20^{\circ}C$, respectively. This fact indicated that fermentation at $5^{\circ}C$ has the highest $CO_2$ content at optimally ripened pH of 4.3 and the fermentation at lower temperature such as $5^{\circ}C$ could extend the eatable time of nabak kimchi.

• The korean journal of orthodontics
• /
• v.26 no.2 s.55
• /
• pp.205-218
• /
• 1996

A given facial type can be considered as a syndrome in which various features are aggregated, so a single parameter is not sufficient to accurately identify a given facial type. This study was designed to identify & characterize the skeletal types that blend under the headline-'Cl III,deepbite'. Cephalograms of thirty-four untreated mixed dentition patients, selected mainly on the basis of clinical impression of Cl III with reduced lower face heights were studied. The following conclusion can be drawn. 1. Cl III malocclusion with reduced lower face height could be classified into three types. 2. Subtype 1 was identified by the following features : strong ramus, more anteriorly positioned upper molars without alveolar hypoplasia, acutely reduced Mn. plane angle. 3. Subtype 2 was characterized by a short ramus, sharply reduced postrior alveolar height, and normal Mn. plane angle. In general, this type had hypoplasia tendency in the vertical dimension. 4. In subtype 3, the AUFH occupying more percentage than ALFH was a outstanding feature. Ramal height was in normal range, alveolar hypoplasia and slightly reduced Mn. plane angle was observed. 5. The features of the subtypes were reflected in certain indices, which can be regarded as discriminative index. LAFH: if reduced, regardless of subtypes, indicates reduced lower ant. face height consistently. FHR: when this ratio is increased, it indicates subtype 1. FHI: when this ratio is in normal range, it indicates subtype 2. FPI: if reduced greatly, it indicates subtype 3.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.363-370
• /
• 2018

The succulent plants of Echeveria genus are in increasing demand worldwide, but it is difficult to supply good quality young plants throughout the year because propagation efficiencies are depend on cultivar and environmental factors. This study was carried out to investigate the propagation efficiencies of leaf cutting in Echeveria cultivars at different LED light qualities in a closed-type plant factory system. Leaf cuttings cut from stock plants of six difficult-to-propagated cultivars 'Afterglow (AG)', 'Berkeley Light (BL)', 'Mason (MS)', 'Subsessilis Light (SL)', 'Cream Tea (CT)', and 'Ben Badis (BB)' were put into cutting media in the plant factory system maintained at a temperature of $24{\pm}2^{\circ}C$ and relative humidity of $60{\pm}10%$, and watered with over-head irrigation twice a week. Cuttings were irradiated with sole or mixed red (R, 660 nm), blue (B, 450 nm), green (G, 530 nm), and far-red (FR, 730 nm) LEDs as follows: R10, R8+B2, R5+B5, R7+B2+FR1, and R7+B2+G1. PPFD just above the cuttings was $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and photoperiod was 16/8 (light/dark) hours. As a result, propagation efficiencies were dependent on cultivar. Rooting and shooting were relatively easy in 'SL' but shoot formation in 'AG' was very difficult. Light qualities from LEDs also affected plant regeneration. Light conditions with a higher ratio of B, R5+B5, R7+B2+FR1, and R7+B2+G1, promoted shoot formation and growth but inhibited rooting and root growth. R10 and R8+B2 with a higher ratio of R promoted rooting and root growth and inhibited shoot formation and growth of cuttings. In addition, the treatment with FR increased leaf size and biomass of the all plants. Therefore, further studies are needed to investigate the optimum compositions of LED light quality for the improvement of leaf cutting efficiency in difficultto-propagated Echeveria cultivars.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.1
• /
• pp.1-8
• /
• 2009

This research was performed to assess a Fenton-like oxidation using naturally present iron in the field to treat remained oils throughout silty clay residues which finally resided even after a series of soil washing process. Biodegradability was thus tested for reaction products to investigate a possible treatment of the Fenton-like oxidation coupled with a biological treatment process. For those purposes, two types of field soil samples (e.g., dewatered cake after conditioning with a polymer and not-dewatered residue) were tested to remove TPH by adding the various concentration of hydrogen peroxide ($H_2O_2$). Moreover the biodegradability of treated samples was observed based on the ratio of $BOD_5/COD_{Cr}$ after Fenton-like oxidation. The Highest removal of TPH was at 1% of hydrogen peroxide ($H_2O_2$) when hydrogen peroxide ($H_2O_2$) was continuously injected for a period of time rather than that of spot introduction with the same amount of it. For the dewatered cake, TPH was effectively treated when the ratio of solid and water was mixed at 1 : 2. Employing cooking oil could increase solubility of TPH due to enhanced surface-active escalating TPH desorption from silty clay. Nonetheless, the biodegradability was decreased as long as the oxidation duration being extended regardless of operational conditions. It was therefore proved that Fenton-like oxidation using $H_2O_2$ and natural iron minerals was able to remove adsorbed oils in silty clay but the removal efficiency of TPH was low. And if a biological treatment process followed after Fenton-like oxidation, microorganisms would need enough time for acclimation.

• Korean Journal of Remote Sensing
• /
• v.17 no.1
• /
• pp.1-14
• /
• 2001

The enhancement of the refractive index structure parameter $C_n^2$ often occurs where vertical gradients of virtual potential temperature ${\theta}_v$ and mixing ratio q have their maximum values. The $C_n^2$ can be a very useful parameter for estimating the convective boundary layer(CBL) height. The behavior of $C_n^2$ peaks, often used to locate the height of mixed layer, was investigated in the present study. In addition, a new method to determine the CBL height objectively using both $C_n^2$ and vertical air velocity variance ${\sigma}_w$ data of UHF radar was also suggested. The present analysis showed that the $C_n^2$ peaks in the backscatter intensity profiles often occurred not only at the top of the CBL but also at the top of a residual layer or at a cloud layer. The $C_n^2$ peaks corresponding to the CBL heights were slightly lower than the CBL heights derived from rawinsonde sounding data when vertical mixing owing to weak solar heating was not significant and the height of strong vertical ${\theta}_v$ gradients were not consistent with that of strong vertical q gradients. However, the $C_n^2$ peaks corresponding to the CBL heights were in good agreement with the rawinsonde-estimated CBL hegiths when vertical mixing owing to solar heating was significant and the vertical gradient of both ${\theta}_v$ and q in the entrainment zone was very strong. The maximum backscatter intensity method, which determines the height of $C_n^2$ peak as the CBL height, correctly estimated the CBL height when the $C_n^2$ profile had single peak, but this method erroneously estimated the CBL height when there was a residual layer or a cloud layer over the top of the CBL. The new method distinguished when there the CBL height from the peak due a cloud layer or a residual layer using both $C_n^2$ and ${\sigma}_w$ data, and correctly estimated the CBL height. As for estimation of diurnal variation of the CBL height, the new method backscatter intensity method even if the vertical profile of backscatter intensity had two peaks from the CBL height and a residual layer or a cloud layer.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.63-70
• /
• 2012

This study was conducted to investigated the distribution, ecological character and life cycle of Black Soldier Fly(BSF), Hermetia illucens, to determine effects of BSF on composing ability to the livestock feces. The distribution of BSF was defined in all parts of the country in Korea. Its main habitat was found to be areas near cattle sheds, feces sheds, living waste dump grounds, and food waste dump grounds. Excellent species of the bio-conversion using the livestock feces were selected out of two kinds of solider flies(Hermetia illucens and Ptecticus tenebrifer). And effects of BSF on composing ability to the livestock feces were pig feces 0.5 g, cattle feces 0.43 g and chicken feces 0.3 g per a larvae of BSF. In the examination of the ability of BSF to decompose food waste, volume of the livestock feces decreased by weight pig feces 77, cattle feces 83.62 and chicken feces 80%. Observed characteristics of BSF larvae and pupae stage were by developmental stage may be summarized as follows: size and length of larvae and pupae of BSF were higher than in pig feces and mixed sawdust treatments. In order to develop artificial indoor rearing techniques, The pupation and emergence rate were not visible the difference but important factor of the mating and egg-laying was a sun light. And it was visible the difference in mating ratio. Mating rate of H. illucens by seasonal change was the highest from May to July. Mating mostly occurred between 10 : 00 and 12 : 00 during which light intensity is high. As the egg-laying medium for artificial egg collection, calf feed and food waste were most effective. The ratio of egg-laying medium is waste food : sawdust(1 : 1) in volume. For egg-laying materials, flower foam and wood with holes were used; holes sized 3 ~ 5 mm in diameter, 7 ~ 10 mm in depth were most preferred for egg-laying.

• Clean Technology
• /
• v.25 no.2
• /
• pp.129-139
• /
• 2019

Bamboo is an evergreen perennial plant, and it is known as one of the most productive and fastest-growing plants in the world. It grows quickly in moderate climates with only moderate water and fertilizer. Traditionally in Asia, bamboo is used for building materials, as a food source, and as versatile raw materials. Bamboo as a biomass feedstock can be transformed to prepare activated carbon using the thermal treatment of pyrolysis. The effect of process variables such as carbonization temperature, activation temperature, activation time, the amount of steam, and the mixing ratio of phosphoric acid and bamboo were systematically investigated to optimize the preparation conditions. Steam activation was proceeded after carbonization with a vapor flow rate of $0.8{\sim}1.8mL-H_2O\;g-char^{-1}\;h^{-1}$ and activation time of 1 ~ 3 h at $700{\sim}900^{\circ}C$. Carbon yield and surface area reached 2.04 ~ 20.59 wt% and $499.17{\sim}1074.04m^2\;g^{-1}$, respectively, with a steam flow rate of $1.4mL-H_2O\;g-char^{-1}\;h^{-1}$ for 2 h. Also, the carbon yield and surface area were 24.67 wt% and $1389.59m^2\;g^{-1}$, respectively, when the bamboo and phosphoric acid were mixed in a 1:1 weight ratio ($700^{\circ}C$, 2 h, $1.4mL-H_2O\;g-char^{-1}\;h^{-1}$). The adsorption of methylene blue into the bamboo activated carbon was studied based on pseudo first order and second order kinetics models. The adsorption kinetics were found to follow the pseudo second order model, which is governed by chemisorption.

• Korean Journal of Psychosomatic Medicine
• /
• v.28 no.2
• /
• pp.116-125
• /
• 2020

Objectives : Self-poisoning is the leading cause of visits to the emergency departments after a suicide attempts. This study is aimed to compare the patient characteristics according to the category of drugs ingested by the patients who attempted suicide. Methods : All medical charts were retrospectively reviewed from patients who visited the emergency center, at Seoul Medical Center, due to intentional self-poisoning from April of 2011 to July of 2019. We investigated the information regarding the subtype and quantity of the intoxication drug, how it was obtained, suicidal history, and psychiatric history, as well as, sociodemographic information. Variables were compared between prescription drug (PD) and non-prescription drug (NPD) poisoning groups. Results : The mean age of the NPD poisoning group was significantly lower than that of the PD poisoning group. The patient ratio of those enrolled in national health insurance and living with spouses were significantly higher in the NPD poisoning group. Compared to the NPD poisoning group, the PD poisoning group had a higher incidence of mental illnesses, underlying diseases and ratio of involuntary visit to the emergency department. Among the prescription drugs, the benzodiazepine poisoning group had a higher rate of self-prescription than the non-poisoning group, while the zolpidem poisoning group had a higher rate of the using someone else's prescription than other drugs. Each single drug poisoning group (benzodiazepine, zolpidem, and antidepressant single-agent) had a higher rate of no mental illness than each of the mixed-poisoning group. Conclusions : Guidelines for regulating non-prescription drugs are needed as a matter of suicide prevention. Also, this study suggests that clinicians need to be careful when issuing prescriptions and should suicidal risk according to patients' characteristics, duration of follow-up and type of drug packaging.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.148-169
• /
• 2023

Hayeob pigment is known as one of the traditional dark green pigments, but the color, raw material, and manufacturing method have not been clearly identified. However, comparing the analysis results of the particle shape and constituent minerals of Hayeob pigments revealed through pigment analysis studies of colored cultural properties such as Dancheong, Gwaebul, and paintings, Hayeob pigments appear to be the same as Dongrok pigments produced by salt corrosion. Therefore, in order to restore Hayeob pigment, the manufacturing method of Dongrok pigment was studied based on the records of old literature. The Dongrok pigment manufacturing method confirmed in the old literature records is a natural corrosion method in which copper powder and a caustic are mixed and then left in a humid condition to corrode. Based on this, artificial corrosion using a corrosion tester was adopted to corrode the copper powder more efficiently, and an appropriate mixing ratio was selected by analyzing the state of corrosion products according to the mixing ratio of the caustic agent. In addition, the manufacturing method of Dongrok pigment was established by adding a salt removal process to remove residual caustic agents and a purification process to increase chroma during pigment coloring. The prepared Dongrok pigments have a bluish green or green color, show an elliptical particle shape and a form in which small particles are aggregated, and a porous surface is observed. The main constituent elements are copper(Cu) and chlorine(Cl), and the main constituent mineral is identified as atacamite [Cu₂Cl(OH)₃]. As a result of an accelerated weathering test to evaluate the stability of the prepared Dongrok pigments, it was found that the greenness partially decreased and the yellowness significantly increased as deterioration progressed. Before deterioration, the Dongrok pigments had lower yellowness compared to the Hayeob pigments of the old Dancheong, but after deterioration, yellowness increased significantly, and it was found to have a similar chromaticity range as Dancheong's Hayeob pigments. As a result, the prepared Dongrok pigments were confirmed to be similar to Dancheong's Hayeob pigments in terms of color as well as particle shape and constituent minerals.