• The Journal of the Korean dental association
• /
• v.57 no.10
• /
• pp.560-568
• /
• 2019

Purpose: This study evaluated the antibacterial effects of curcuma, ginger, and finger root extracts in water-soluble powder on planktonic Streptococcus mutans(S.mutans), which is known to cause dental caries, in order to confirm whether these extracts could perform as photosensitizers for the effects of photodynamic therapy (PDT). Methods: This study used the strain of streptococcus mutans ATCC 25175 distributed by the Korean Collection for Type Cultures of the Korea Research Institute of Bioscience & Biotechnology. Commercial edible curcuma, ginger and finger root were used as the natural extracts for the use of photosensitizer. To extract organic solvent, 3 g of each powder was mixed in $30m{\ell}$ of dimethyl sulfoxide (DMSO, VWR, Germany) before extraction. $1.8m{\ell}$ of the photosensitizer solution, manufactured in the concentrations of 5, 0.5, and $0.05mg/m{\ell}$, was mixed with $0.2m{\ell}$ of the S. mutans culture medium that had been cultured for 2 days. To induce the photodynamic reaction, Qraycam (AIOBIO, Seoul, Korea) equipped with 405 nm LED was used to expose light for 5 minutes to irradiate 59 nW energy for 300 seconds. Results: Compared with the case with no light, a higher photodynamic therapeutic effect was confirmed with $0.05mg/m{\ell}$ curcuma powder extract, the concentration of $0.5mg/m{\ell}$ and LED light of 405 nm wavelength (p=0.000, p=0.003). $0.05mg/m{\ell}$ of curcuma powder extract and the concentration of $0.5mg/m{\ell}$ showed 100% antibacterial effect when exposed to light, whereas the concentration of $5mg/m{\ell}$ showed 11.95% antibacterial effect. When exposed to light, $0.05mg/m{\ell}$ of ginger powder extract showed an antibacterial effect which didn't statistically decrease. The concentrations of $0.5mg/m{\ell}$ and $5mg/m{\ell}$ did not show any antibacterial effects. As a result of examining any photodynamic therapeutic effects of finger root powder extract on S. mutans, no statistically significant effect was found. Conclusion: The curcuma powder extract is expected to perform as a photosensitizer. Even though belonging to the same ginger family, ginger powder and finger root powder seem difficult to perform as photosensitizer.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.792-797
• /
• 2015

Graphene has a wide spectrum on its application field due to various and excellent physical properties. However, it is very difficult to apply that graphene exists as lump or fold condition in general organic solvents. Besides, graphene was difficult to maintain as uniform condition due to chemical inert and distributions with various size and shapes. Therefore, this study was focused to study dispersion and modifying methods of aggregated graphene. The dispersion methods contain as follow: i) physical milling using glass bead, ii) co-treatment of glass bead and ultrasonic waves, iii) dispersion in organic solvents, iv) modifying with dry-ice. Milling using glass bead with size 2.5 mm was effective to be size decrease of 36.4% in comparison with control group. Mixed treatment of glass bead (size 2.5 mm) and ultrasonic waves (225W, 10 min) showed relative size decrease of 76%, suggesting that the size decrease depends on the size of glass bead, intensity of ultrasonic waves and treatment time. Solvents of Ethyl acetate (EA) and Isoprophyl alcohol (IPA) were used in order to improve dispersion by modifying surface of graphene. IPA of them showed a favorable dispersion with more -CO functional groups in the FT-IR analysis. On the other hand, the oxygen content of graphene surface modified by dry-ice was highly increased from 0.8 to 4.9%. From the results, it was decided that the favorable dispersion state for a long time was obtained under the condition of -CO functional group increase in IPA solvent.

• Journal of the Korean Chemical Society
• /
• v.36 no.4
• /
• pp.565-578
• /
• 1992

It has been suggested that Hg$^{2+}$-promoted reaction of a series of cis-[Co(en)$_2$(L)Cl]$^{2+}$ (en = 1,2-diaminoethane) with L = NH$_3$, NH$_2$CH$_3$, glyOC$_2$H$_5$, glyOCH$_3$, dl-alaOC$_2$H$_5$, NH$_2$CH$_2$CONH$_2$, and NH$_2$CH$_2$CN proceeds by dissociative interchange(I$_d$) mechanism from kinetic data, circular dichroism spectra, analyses of products, and the values of m(Grunwald-Winstein plot) using Y (solvent ionizing power) in aqueous solution and in mixed aqueous-organic solvent. It has been found that chloride replacement by water (aquation) for the series with L = NH$_3$ and NH$_2$CH$_3$ and chelation of ligand L to Co(Ⅲ) for the series with L = glyOC$_2$H$_5$, glyOCH$_3$, dl-alaOC$_2$H$_5$, NH$_2$CH$_2$CONH$_2$, and NH$_2$CH$_2$CN occurs, respectively. The rate constants on Hg$^{2+}$-induced reaction of the series except cis-[Co(en)$_2$(NH$_2$CH$_2$CN)Cl]$^{2+}$ were increased with increasing the contents of ethanol in mixed water-ethanol solvents. In mixed water-30${\%}$ organic solvents, the rate constants of the series except cis-[Co(en)$_2$(NH$_2$CH$_2$CN)Cl]$^{2+}$ have also been measured in the order 30${\%}$ 2-propanol-water > 30${\%}$ ethanol-water > water. However, the rate constants of cis-[Co(en)$_2$(NH$_2$CH$_2$CN)Cl]$^{2+}$ were reversed. The rate constants of the series with L= NH$_3$ and NH$_2$CH$_3$ were related to ligand field parameter (${\Delta}$), but those of the series with L = glyOC$_2$H$_5$, glyOCH$_3$, dl-alaOC$_2$H$_5$, NH$_2$CH$_2$CONH$_2$, NH$_2$CH$_2$CN were not. The reaction between the series and Hg2+ in aqueous media containing NO$_3^-$ has been investigated. The results for the reaction do not alter the mechanism, but the rate only was altered.

• Korean Journal of Materials Research
• /
• v.10 no.6
• /
• pp.385-391
• /
• 2000

A kinetic study on the preparation of iron powder by hydrogen reduction of ferrous chloride vapor has been carried out both experimentally and theoretically. For the preparation of iron powder, ferrous chloride was vaporized and transported to a reaction zone by Ar gas used as carrier. Ferrous chloride vapor and hydrogen were mixed and subject to a reduction reaction at high temperature to produce iron powder and HCI gas. Iron powder was collected with organic solvent at the end of reaction zone and HCI gas was also absorbed in a caustic soda solution to determine the conversion ratio of ferrous chloride. For the development of rate equations, a 1st-order reaction and equilibration of ferrous chloride vapor with Ar gas were assumed. According to the results, the rate constant, k could be expressed as $k=7,879exp(-53,840/RT)\textrm{dm}^3/mole.sec$ and the activation energy was found to be 53.84kJ/mole. From TEM observation, the particle size distribution of iron powder produced was found to be in the range of $0.1~1.0{\mu\textrm{m}}$ which was not significantly influenced by reaction temperature or gas flow rates.

• Journal of the Korean Chemical Society
• /
• v.40 no.7
• /
• pp.501-508
• /
• 1996

The base-catalysed carbonato or oxalato ring opening of cis-${\beta}-[Co(3,2,3,-tet))CO_3\;or\;C_2O_4)]^+$(3,2,3-tet=4,7-diazadecane-1,10-diamine, $C_2O_4$=oxalate) has been investigated in aqueous solution and in mixed aqueous-organic solvent. The rearrangement of 3,2,3-tet and carbonato or oxalato ring opening of cis-${\beta}-[Co(3,2,3,-tet))CO_3\;or\;C_2O_4)]^+$ occurred via the dissociation of one of the two coordinating carbonato or oxalato oxygen atoms. The resulting product was cis-${\alpha}-[Co(3,2,3-tet)(OH)(OCO_2\;or\;OC_2O_3)_3].$ It has been suggested that the base-catalysed reaction of cis-${\beta}-[Co(3,2,3,-tet))CO_3\;or\;C_2O_4)]^+$ takes place via the Dcb(dissociative conjugated base) mechanism. The other oxygen atom of carbonato or oxalato was dissociated continuously to give cis-${\alpha}-[Co(3,2,3-tet)(OH)_2]^+.$ Cis-${\alpha}-[Co(3,2,3-tet)(OH)_2]^+$ was isomerized to cis-${\beta}-[Co(3,2,3-tet)(OH)_2]^+.$

• Membrane Journal
• /
• v.21 no.4
• /
• pp.367-376
• /
• 2011

Huge amount of $CH_4$ mixtures has been emitted from landfills and organic wastes via anaerobic digestion. The recovery of high purity $CH_4$ from these gases has two merits: reduction of green house gases and production of renewable fuels. Membrane technology based on polymeric materials can be used in this application. In this study, asymmetric gas separation hollow fiber membranes were fabricated to develop the membrane-based bio-gas purification process. Polyethersulfone (PES) was chosen as a polymer materials because of high $CO_2$ permeability of 3.4 barrer and $CO_2/CH_4$ selectivity of 50[1]. Acetone was used as a non-solvent additive because of its unique swelling power for PES and highly volatile character. The prepared PES hollow fiber showed excellent separation properties: 36 GPU of $CO_2$ permeance and 46 of $CO_2/CH_4$ selectivity at optimized preparation conditions: 9wt% acetone content, 10cm air-gap and 4wt% PDMS coating processes. With the PES hollow fiber membranes developed, mixed $CO_2/CH_4$ test was done by changing various operating conditions such as pressures and feed compositions to meet the highest recovery of CH4 with 95% purity. High $CH_4$ recovery of 58 wt% was observed at 10 atm feed pressure for the 50 vol% of $CO_2$ in $CO_2/CH_4$ mixture.