• Horticultural Science & Technology
• /
• v.30 no.2
• /
• pp.129-136
• /
• 2012

This study was conducted to develop an efficient mass propagation method for the mature $Prunus$ $yedoensis$ Matsumura (43 to 58 years old). Cutting was conducted depending on cutting time, auxin treatments (IBA and NAA treatments mixed with talc powder), and cuttings position on shoots in a plastic house equipped with a fog system without heating. Rooted cuttings were transplanted to a nursery bed, and their growth characteristics were investigated in order to check whether the cuttings are successful or not for roadside tree planting. The average rooting rate was highly significant ($P$ < 0.0001) in all treatments: cutting on June 1st (61.4%) was more than two times greater in rooting rate than that on August 1st (23.6%); IBA 1,000 $mg{\cdot}L^{-1}$ (90.8%) and IBA 500 $mg{\cdot}L^{-1}$ (89.2%) showed much greater rooting rates than those of the other treatments; upper part of the cuttings treated with IBA 1,000 $mg{\cdot}L^{-1}$ showed the highest rooting rate, 96.7%. The interactions among treatments in the average rooting rate were also significant. There were significant differences ($P$ < 0.0001) among the auxin treatments in the survival rate of leafed cuttings transplanted to a nursery bed. The average survival rate was 46.5%, and IBA 1,000 $mg{\cdot}L^{-1}$ treatment was the highest in leafed cuttings 79.2%, but most of leafless cuttings were dead. There were significant differences ($P$ < 0.0001) among the cuttings, grafts, and in the seedlings height, diameter at root collar, the number of roots, branches, and leaves, etc., and the cuttings was the best. We can expect a possibility of mass propagation of improved $P.$ $yedoensis$ Matsumura and a high planting survival rate through the transplanting of cuttings to a nursery bed in which the cuttings should be the following conditions: cutting in June to July, use of the upper part of cuttings, IBA treatment, and rooting in August in a cutting-greenhouse equipped with a fog system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.10
• /
• pp.1544-1557
• /
• 2020

Objective: Genomic selection (GS) is becoming popular in animals' genetic development. We, therefore, investigated the single-step genomic best linear unbiased prediction (ssGBLUP) as tool for GS, and compared its efficacy with the traditional pedigree BLUP (pedBLUP) method. Methods: A total of 9,952 males born between 1997 and 2018 under Hanwoo proven-bull selection program was studied. We analyzed body weight at 12 months and carcass weight (kg), backfat thickness, eye muscle area, and marbling score traits. About 7,387 bulls were genotyped using Illumina 50K BeadChip Arrays. Multiple-trait animal model analyses were performed using BLUPF90 software programs. Breeding value accuracy was calculated using two methods: i) Pearson's correlation of genomic estimated breeding value (GEBV) with EBV of all animals (r_M1) and ii) correlation using inverse of coefficient matrix from the mixed-model equations (r_M2). Then, we compared these accuracies by overall population, info-type (PHEN, phenotyped-only; GEN, genotyped-only; and PH+GEN, phenotyped and genotyped), and bull-types (YBULL, young male calves; CBULL, young candidate bulls; and PBULL, proven bulls). Results: The r_M1 estimates in the study were between 0.90 and 0.96 among five traits. The r_M1 estimates varied slightly by population and info-type, but noticeably by bull-type for traits. Generally average r_M2 estimates were much smaller than r_M1 (pedBLUP, 0.40 to0.44; ssGBLUP, 0.41 to 0.45) at population level. However, r_M2 from both BLUP models varied noticeably across info-types and bull-types. The ssGBLUP estimates of r_M2 in PHEN, GEN, and PH+ GEN ranged between 0.51 and 0.63, 0.66 and 0.70, and 0.68 and 0.73, respectively. In YBULL, CBULL, and PBULL, the r_M2 estimates ranged between 0.54 and 0.57, 0.55 and 0.62, and 0.70 and 0.74, respectively. The pedBLUP based r_M2 estimates were also relatively lower than ssGBLUP estimates. At the population level, we found an increase in accuracy by 2.0% to 4.5% among traits. Traits in PHEN were least influenced by ssGBLUP (0% to 2.0%), whereas the highest positive changes were in GEN (8.1% to 10.7%). PH+GEN also showed 6.5% to 8.5% increase in accuracy by ssGBLUP. However, the highest improvements were found in bull-types (YBULL, 21% to 35.7%; CBULL, 3.3% to 9.3%; PBULL, 2.8% to 6.1%). Conclusion: A noticeable improvement by ssGBLUP was observed in this study. Findings of differential responses to ssGBLUP by various bulls could assist in better selection decision making as well. We, therefore, suggest that ssGBLUP could be used for GS in Hanwoo proven-bull evaluation program.

• Child Health Nursing Research
• /
• v.7 no.1
• /
• pp.118-140
• /
• 2001

The purpose of this study was to measure the effect of safety education program in preschool children for accident prevention and improve their health through more systematic method. Data were collected from 584 preschoolers(247 preschooler are assigned to experimental group and 337 preschoolers are assinged to control group) from 4 to 6 years old using APP paper test which consists of questions and drawings. To experimental group, safety education were done 4 times within the time of 30 minutes per 1 time using education books, drawings, OHP. The findings of this study are as follows: 1. There were significant difference in movement(χ²=18.732, p=.0000), behavioral character(χ²=27.785, p=.000), synthetic judgement(χ²=12.02, p=0.002). So, safety education program have effect on preschooler. 2. In the accident proneness on preschooler between experimental group and control group according to general characteristics, it proved significant difference in the case of accident prevention education were done, reasoning power(χ²=10.48, p=.005), movement speed(χ²=7.341, p=.025) and behavioral character(χ²=18.86, p=.000), in the case of housing pattern is private house(individual house, yard?), reasoning power(χ²=6.683, p=.035), movement speed(χ²=12.76, p= .002) and behavioral character(χ²=12.24, p=.002), in the case of housing pattern is mixed-type, movement speed(χ²=6.935, p= .031) and behavioral character(χ²=10.816, p=.004), in the case of housing pattern is over six stories, movement speed(χ²=7.543, p=.023), in the case of subjects' age is 4 years old, movement speed(χ²=16.5, p= .000) and behavioral character(χ²=12.18, p=.002), in the case of subjects' age is 5 years old, movement speed(χ²=7.519, p= .023), watchfulness(χ²=6.372, p=.041), behavioral character(χ²=14.74, p=0.001) and synthetic judgement(χ²=14.5, p=.001), in the case of subjects' sex is male, life safety(χ²=6.406, p=.041), movement speed(χ²=22.86, p= .000), behavioral character(χ²=13.72, p= .001) and synthetic judgement(χ²=13.82, p=.001), in the case of subjects' sex is female, reasoning power(χ²=12.57, p=.002) and behavioral character(χ²=13.16, p= .001), in the case of childrens have past accidental experience, traffic safety(χ²= 6.683, p=.035), in the case of childrens have no past accidental experience, reasoning power(χ²=8.384, p=.015), movement speed(χ²=20.6, p=.000), behavioral character(χ²=25.1, p=.000) and synthetic judgement(χ² =10.79, p=.005), in the case of children's order is first, reasoning power(χ²=11.15, p=.004), movement speed(χ²=11.92, p= .003) and behavioral character(χ²=7.003, p=.030), in the case of children's order is second, movement speed(χ²=6.694, p= .035), behavioral character(χ²=26.9, p= .000) and synthetic judgement(χ²=14.3, p= .001), in the case of nuclear family, reasoning power(χ²=8.777, p=.012), movement speed(χ²=19.0, p=.000), behavioral character (χ²=26.4, p=0.000) and synthetic judgement (χ²=9.999, p=.007), in the case of mothers' school career is under high school graduate, life safety(χ²=8.023, p=.018), movement speed(χ²=10.99, p=.004) and behavioral character(χ²=6.777, p=.034), in the case of mothers' school career is beyond college graduate, reasoning power(χ²=6.717, p= .035), movement speed(χ²=8.963, p=.011), behavioral character(χ²=25.03, p=.000) and synthetic judgement(χ²=15.19, p=.001), in the case of mothers' age ranged 31-34, movement speed(χ²=12.29, p=.002) and behavioral character(χ²=14.17, p=.001), in the case of mothers' age ranged 35-39, movement speed(χ²=9.859, p=.007), behavioral character(χ²=9.095, p=.011) and synthetic judgement(χ²=7.810, p=.020), in the case of mothers' age is over 40, life safety(χ² =5.593, p=.025), in the case of mothers' job is full-time, traffic safety(χ²=6.032, p=.049) and reasoning power(χ²=8.502, p= .014), in the case of mothers' job is part- time., movement speed(χ²=10.99, p=.004) and behavioral character(χ²=7.895, p= .019), in the case of mothers have no job, movement speed(χ²=6.410, p=.041), movement stability(χ²=6.879, p=.032), behavioral character(χ²=27.72, p=.000) and synthetic judgement(χ²=18.11, p=.000). The difference of accident proneness between experimental group and control group according to general characterists, it also showed that there were significant difference in behavioral character compared to other area.. From this findings, we can guess that safety education program change and guide preschoolers' behavioral character to desirable direction.

• Korean Journal of Environment and Ecology
• /
• v.20 no.4
• /
• pp.415-424
• /
• 2006

This study was carried out to analyze the characteristics of forest watershed factors by using the quantification theory(I) for evaluation and prediction of the failure hazard area. Present $sediment(m^3/yr/ha)$ of erosion control dams were investigated in 95 sites of erosion control dam constructed during 1986 to 1999 in Gyeongnam province. The results obtained from this study were summarized as follows; General condition of class I(Very hazard area) were as follow; Igneous rock in parent rock, coniferous in forest type, below 20year in stand age, below 30cm in soil depth, SCL in soil texture, $31{\sim}40%$ in gravel contents, $S{\sim}E$ in aspect, $2,501{\sim}3,600m$ in length of main stream, $26{\sim}30$ in number of total streams, $6,601{\sim}10,000m$ in length of total streams, over 3 in stream order, over 16 in number of first streams order and over $31^{\circ}$ of slope gradient. General condition of class IIl(hazard area) were as follow; Metamorphic rock in parent rock, hardwood in forest type, over $21{\sim}24year$ in stand age, $31{\sim}40cm$ in soil depth, SiCL or SCL in soil texture, $11{\sim}20%$ in gravel contents, $S{\sim}W$ in aspect, $1,501{\sim}2,600m$ in length of main stream, $6{\sim}10$ in number of total streams, $3,501{\sim}5,500m$ in length of total streams, 2 in stream order, $6{\sim}10$ in number of first streams order and over $31^{\circ}$ of slope gradient. General condition of class III(Un hazard area) were as follow; Sedimentary rock in parent rock, mixed in forest type, over 25year in stand age, $41{\sim}50cm$ in soil depth, SiCL in soil texture, below 10% in gravel contents, $N{\sim}W$ in aspect, below 500m in length of main stream, below 5 in number of total streams, below 1,000m in length of total treams, below 1 in stream order, below 2 in number of first streams order and below $25^{\circ}$ of slope gradient. The prediction method of suitable for failure hazard area divided into class I, II, and III for the convenience of use. The score of class I evaluated as a very hazard area was over 4.8052. A score of class II was 4.8051 to 2.5602, it was evaluated as a hazard area, and class III was below 2.5601, it was evaluated as a un hazard area.

• Korean Journal of Plant Resources
• /
• v.27 no.1
• /
• pp.60-71
• /
• 2014

This study was conducted to identify the potential of rape stalk as a raw material for biorefinery process of rape flower. At first, rape stalk (RS) was immersed in distilled water (DW), acetic acid (AA), oxalic acid (OA), sulfuric acid (SA) and sodium hydroxide (SH) solutions, and the content of reducing sugars liberated from immersed RS was analyzed. Glucose, xylose, arabinose and sucrose were detected varying with the immersion type. In particular, 1% AA-immersion of RS for 72 hr was the most effective conditions to liberate glucose from RS. Secondly, the RS residues were used for elementary analysis and fabrication of fuel pellets. In addition to the solution type, concentration of immersion solutions (0%, 1%, 2%) and immersion time (24, 72, 120 hr) were used as experimental factors. The contents of nitrogen, sulfur and chlorine reduced effectively through the immersion of RS in DW, AA and OA solutions. For properties of RS-based pellets, bulk density and higher heating value of RS-based pellets greatly increased with the immersion of RS, and the qualities were much higher than those of the A-grade pellet of the EN standards. Ash content decreased remarkably through the immersion of RS, and was satisfied with the A-grade pellet standard. Durability was negatively affected by the immersion of RS, and did not reached to B-grade of the EN standard. In conclusion, acid immersion of RS can be a pretreatment method for the production of fuel pellet and bioethanol, but use of the immersed RS for the production of high-quality pellets might be restricted due to low durability of immersed-RS pellets. Therefore, further studies, such as investigation of detailed immersion conditions, fabrication of mixed pellets with wooden materials and addition of binders, are needed to resolve the problems.

• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.261-268
• /
• 2018

To prepare mesoporous $TiO_2$ ($meso-TiO_2$) with anatase and rutile crystal structures, hydrothermal and template synthesis were used. $Meso-TiO_2$ with anatase structure was obtained by hydrothermal synthesis. The crystal structure of $meso-TiO_2$ by hydrothermal synthesis converted from anatase to rutile by simple heating at $600^{\circ}C$ and above. However, their mesopore structure collapsed due to phase transition. To prepare $meso-TiO_2$ with rutile structure, template synthesis method was applied using mesoporous silica KIT-6 as a template. Once we incorporated anatase $TiO_2$ inside mesopores of silica, the phase transition temperature of $TiO_2$ confined inside KIT-6 was much higher ($900^{\circ}C$) than that of free-standing $TiO_2$ ($600^{\circ}C$). The suppression of $TiO_2$ phase transition inside mesopores of KIT-6 is closely related with the interaction between $TiO_2$ surface and silica walls in KIT-6 because oxygen vacancy in $TiO_2$ is regarded as the starting point for phase transition. After removal of silica template by NaOH solution washing, $meso-TiO_2$ with mixed phase between anatase and rutile was obtained.

• Economic and Environmental Geology
• /
• v.37 no.3
• /
• pp.303-309
• /
• 2004

Pyrochlores were known as promising materials for the immobilization of radioactive actinide. Accordingly, we synthesized pyrochlores with Gd$_2$Ti$_2$$O_7$ and Gd$_2$Zr$_2$$O_7$compositions by sintering method, and studied its properties and phase relations in Gd-Ti-O and Gd-Zr-O system. The mixed powders were pressed into pellets under 200-400 kgf/cm$^2$ at room temperature. and then sintered at 1000-1$600^{\circ}C$ for 0.5-40 hours. The synthesized samples were analyzed and were identified with XRD and SEM/EDS analyses. The optimal synthetic conditions of pyrochlores with Gd$_2$Ti$_2$$O_7$composition were at 140$0^{\circ}C$/0.5hrs, 130$0^{\circ}C$/3hrs and 120$0^{\circ}C$/20hrs. Its chemical composition was $Gd_{2.0-2.1}$$Ti_{1.9-2.0}$$O_7$ and similar to the stoichiometric composition without any relationship in temperature and atmosphere. The optimal synthetic conditions of pyrochlores with $Gd_{2}$$Zr_{2}$$O_7$composition were at 155$0^{\circ}C$/40hrs and 1$600^{\circ}C$/30hrs. The compositions of pyrochlore synthesized from these optimal conditions were irregular with $Gd_{1.5-2.4}$$Zr_{1.7-2.4}$$O_7$. Such heterogeneity indicates that the reaction rate of pyrochlore with Gd$_2$Zr$_2$$O_7$composition is very low, and then its equilibrium state could not be attained even for 40 hours which was the longest sintering time in this research.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.199-208
• /
• 2005

This study analysis if the concepts of kitsch and vernacular remains as cultural elements for product design. Because their function and aesthetic value have vivid possibilities for general product design fields. For the purpose, this study limits its range within post modernism, kitsch, and vernacular, and analyzes their relationships. Against functionalism, post modernism had cultural pluralisms to approach into popular styles, and some of them was amusing design. That post modernism designs stimulated human beings' emotion by decorations or some symbolic forms from specific objects is similar to the symbolism, regionalism, or pluralism of kitsch or vernacular. Kitsch is a free style that is not limited in any specific trends. It is a Meta culture that has influenced into various fields including design, so kitsch does not have a parallel position with a product or design. In product design, kitsch is the behavior and result of imitating existing objects' images. It could have amusement according to which objects are imitated. So if human beings feel amusement by kitsch, it could be same as the direction of post modernism. Kitsch is determined by design atmospheres. They cannot be specified abjectly, and can be different according to people. With symbolism and regionalism, kitsch and vernacular appeared according to people's needs. While kitsch is consumer's tastes-oriented, vernacular is cultural tradition-oriented. Kitsch has symbolism that specifies products' functions or design concepts, and it is a communication method between human being and products. Because vernacular is province-oriented, it has a lot of styles according to regional living environments and cultural differences. So vernacular design reflects continued traditional lifestyles. By restorative memory, regionalism, cultural pluralism, amusement, and symbolism, kitsch and vernacular could be understood the sub or parallel concepts of post modernism. They might be easily miss-understood mixed concepts that have western and national characters. But in kitsch and vernacular concept, modernizing pas by using the pluralism of post modernism should be considered positive. So, the range of the further study is also supposed to be focused on more widened fields to, to establish cultural identification in design.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.243-280
• /
• 2006

At the Bujang-ri Site, Seosan, South Chungcheong Province, around 220 archaeological features, including semi-subterranean houses and pits of Bronze Age and semi-subterranean houses, pits, and burials of Baekje period had been identified and investigated. In Particular, mound burials No. 5 of 13 of Baekje mound burials yielding a gilt-bronze cap along with other valuable artifacts drew international scholarly attention. The gilt-bronze cap from the mound burial No. 5 is a significant archaeological data not only in the study of Baekje archaeology but also in the study of international affairs and exchange at that time. At the time of exposure, the gilt-bronze cap was already broken into a number of pieces and seriously damaged by corrosion, and hardening and urethane foam were necessary in the process of collecting its pieces. Ahead of main conservational treatments on cap, X-ray photograph and CT(computerizes tomography) were taken in order to examine interior structure of the cap and to decide appropriate treatments. In the five layers identified in the profile of cap, a textile layer was set between a metal and a layerof bark of paper birch for avoiding direct contact of the metal and the bark of paper birch. Analyses were executed for examining textile layer and a layer of fibroid material. According to microscopic analysis, while the textile layer consisted of the simplest plain fabric with one fold among three kinds of textile structures, the layer of fibroid material was mixed with two or three kinds of fibers. A comparative analysis with standard sample using FT-IR (Fourier Transform Infrared Spectroscopy) announced that both textiles and fabrics were hemp. Analysis of kind of the paper birch resulted in barks of paper birch with 15 fold. A metallographic microscope, SEM, and WDS were used for the analysis of microscopic structures of plated metal pieces. While amalgam plating was treated as a plating method, the thickness of the plated layer, a barometer of plating technique, was ranged from $1.72{\mu}m$ to $8.67{\mu}m$. The degree of purity of gold (Au) used in plating was 98% in average, and less than 1% of silver (Ag) was included.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.6
• /
• pp.17-26
• /
• 2021

Ground investigation and result analysis generally used to examine all sorts of structures' subsidence or stability can be classified into sandy soil and cohesive soil, and analysis on the liquid limit of soil is utilized to evaluate the physical properties of ground and types or technical behavior of soil. The most widely used method to analyze liquid limit is Casagrande with which liquid limit can be calculated relatively easily; however, it is fairly difficult to apply it to soil equipped with intermediate properties. Therefore, concerning the properties of soil having the intermediate properties of sedimentary ground, this researcher mixed the clay from Yangsan, Gwangyang, and Busan with sandy soil to make intermediate soil and then carried out the test of consistency limit and also evaluated applicability by using the suggested formula of consistency revision. The sample of intermediate soil was the mixture of clay and sandy soil, and to produce intermediate soil, the content (F_c) of fine soil was applied as 50%, 75%, or 100%. Regarding the physical properties of intermediate soil, to maintain the properties of clay in the natural state, bentonite was added at a fixed rate for controlling the properties of clay, and then, consistency was analyzed. By adopting the formula of consistency revision suggested in advanced research, this author analyzed consistency based on the experiment and consistency based on the suggested formula of revision. Also, about intermediate soil collected at the site, consistency based on the experiment and consistency based on the suggested formula of revision were analyzed comparatively, and about intermediate soil collected, this researcher analyzed particle size and calculated the content (F_c) of fine soil to analyze intermediate soil in diverse conditions. Moreover, about intermediate soil collected at the site, the suggested formula of consistency revision was applied to calculate the compression index, and the compression index based on the experiment and the compression index based on the suggested formula were analyzed comparatively to evaluate the applicability of the suggested formula.