• Journal of Powder Materials
• /
• v.24 no.6
• /
• pp.464-471
• /
• 2017

A metal mesh TCE film is fabricated using a series of processes such as UV imprinting of a transparent trench pattern (with a width of $2-5{\mu}m$) onto a PET film, filling it with silver paste, wiping of the surface, and heat-curing the silver paste. In this work nanosized (40-50 nm) silver particles are synthesized and mixed with submicron (250-300 nm)-sized silver particles to prepare silver paste for the fabrication of metal mesh-type TCE films. The filling of these silver pastes into the patterned trench layer is examined using a specially designed filling machine and the rheological testing of the silver pastes. The wiping of the trench layer surface to remove any residual silver paste or particles is tested with various mixture solvents, and ethyl cellosolve acetate (ECA):DI water = 90:10 wt% is found to give the best result. The silver paste with 40-50 nm Ag:250-300 nm Ag in a 10:90 wt% mixture gives the highest electrical conductance. The metal mesh TCE film obtained with this silver paste in an optimized process exhibits a light transmittance of 90.4% and haze at 1.2%, which is suitable for TSP application.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.1
• /
• pp.33-38
• /
• 2015

In this study, flat-type photocatalytic reaction system is applied to reduce toxic hexavalent chromium (Cr(VI)) to trivalent chromium (Cr(III)) in aqueous solution under UV irradiation. To overcome the limitation of conventional photocatalysis, a novel approach toward photocatalytic system for reduction of hexavalent chromium including nanotubular $TiO_2$ (NTT) on two kinds of titanium substrates (foil and mesh) were established. In addition, modified Ti substrates were prepared by bending treatment to increase reaction efficiency of Cr(VI) in the flat-type photocatalytic reactor. For the fabrication of NTT on Ti substrates, Ti foil and mesh was anodized with mixed electrolytes ($NH_4F-H_2O-C_2H_6O_2$) and then annealed in ambient oxygen. The prepared NTT arrays were uniformly grown on two Ti substrates and surface property measurements were performed through SEM and XRD. Hydraulic retention time(HRT) and substrate type were significantly affected the Cr(VI) reduction. Hence, the photocatalytic Cr(VI) reduction was observed to be highest up to 95% at bended(modified) Ti mesh and lowest HRT. Especially, Ti mesh was more effective as NTT substrate in this research.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.556-560
• /
• 2011

The seawater lift pump system is responsible for maintaining the open canal level to provide the suction flow of circulating water pump at the set point. The objective of this paper is to design a 2-stage mixed flow pump(for seawater lifting) by inverse design and to evaluate the overall performance and the local flow fields of the pump by using a commercial CFD code. Rotating speed of the impeller is 1,750 rpm with the flow rate of 2,700 $m^3/h$. Finite volume method with structured mesh and Realizable ${\kappa}-{\varepsilon}$ turbulent model is used to guaranty more accurate prediction of turbulent flow in the pump impeller. The numerical results such as static head brake horse power and efficiency of the mixed flow pump are compared with the reference data. Also, the periodic condition calculation method for the mixed flow pump was carried out in order to investigate the pump performance characteristics with the modification of impeller geometry.

• Journal of Ecology and Environment
• /
• v.29 no.5
• /
• pp.469-478
• /
• 2006

The composition changes of litters were investigated to figure out the effects of the decomposition of Humulus japonicus on nutrient circulation and decomposition process in the riverine wetlands: Tan stream and Amsa-dong. Litterbags (mesh size 1 mm and 5 mm) were installed to monitor mass and nutrient changes of 5 types of litters: H. japanicus only, Miscanthus sacchariflarus only, Phragmites communis only, mixed litters including H. japonicus, and mixed litters without H. japonicus for 7 months. It was shown that k (decay rate) of the H. japanicus ($2.68{\sim}3.12$) was higher than that of M. sacchariflorus ($1.83{\sim}2.16$) and P. communis ($0.02{\sim}1.18$). The mass and organic remainings of the mixed litters including H. japonicus at Tan stream were $47.0{\sim}55.1%\;and\;47.0{\sim}54.9%$ and those of the litterbags without H. japanicus were $49.2{\sim}65.4%\;and\;47.1{\sim}57.5%$, respectively. This result indicated that the nutrient circulation was faster at H. japanicus community than others. Ca, Na, Mg, K, P, C, N and H contents reduced to around $40{\sim}80%$ of original. However, Na concentration increased up to $407{\sim}584%$ at 100 days and decreased to $248{\sim}498%$ at the end of the experiment. Decomposition rates were similar between 1 mm and 5mm mesh size litterbags and this implies that plant litters in studied areas decomposed mainly by microbes rather than small animals. This study revealed that the fast growth of H. japonicus was resulted from fast decomposition in part: positive feedback of nutrient cycling.

• Korean Journal of Materials Research
• /
• v.28 no.12
• /
• pp.714-718
• /
• 2018

Anti-reflection thin films are fabricated on glass substrates using the screen printing method. Tetra ethyl silicate(TEOS) and methyl tri methoxy silane(MTMS) are used as starting materials and buthyl carbitol acetate(BCA) and buthyl cellusolve(BC) are mixed to improve the viscosity of the solution. Anti-reflection thin films are fabricated according to the number of the screen mesh and the characteristics improve as the mesh size increases. The transmittance and reflectance of the coated thin film using 325 mesh are about 94 % and 0.43 % in the visible wavelength. The thickness and refractive index of the AR thin film are 107 nm and n = 1.26, respectively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.367-368
• /
• 2010

Having function to reducing environmental load, water-permeable concrete has advantages to ground permeation of rain-water and sound absorbtion, heat island reduction, etc., but represents the low flexural characteristics compared with general concrete. Therefore, this study analyzed the flexural characteristics by producing water-permeable concrete mixed with wire mesh or fiber reinforcing for improvement to the flexural characteristics of water-permeable concrete.

• Structural Engineering and Mechanics
• /
• v.11 no.1
• /
• pp.105-122
• /
• 2001

A new three-dimensional 13-node hexahedral element with rotational degrees of freedom, which is designated as MR-H13 element, is presented. The proposed element is established by adding five nodes to one of the six faces of basic 8-node hexahedral element. The new element can be effectively used in the connection between the refined mesh and the coarser mesh. The derivation of the current element in this paper is based on the variational principles in which the rotation and skew-symmetric stress are introduced as independent variables. Numerical examples show that the performance of the new element is satisfactory.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.5
• /
• pp.12-17
• /
• 2011

The seawater lift pump system is responsible for maintaining the open canal level to provide the suction flow of circulating water pump at the set point. The objective of this paper is to design a 2-stage mixed flow pump (for seawater lifting) by inverse design method and to evaluate the overall performance and the local flow fields of the pump by using a commercial CFD code. Rotating speed of the impeller is 1,750 rpm with the flow rate of 2,700 $m^3$/h. Finite volume method with structured mesh and realized k-${\varepsilon}$ turbulent model is used to guaranty more accurate prediction of turbulent flow in the pump impeller. The numerical results such as static head, brake horse power and efficiency of the mixed flow pump are compared with the design data. The simulated results are good agreement with the design data less 3% error.

• The Research Journal of the Costume Culture
• /
• v.29 no.6
• /
• pp.763-778
• /
• 2021

The study aims to analyze the mixed characteristics of knit fashion design as demonstrated in Sacai's collection, which promotes hybrid and mesh-up fusion and proposes various knit design ideas. Standards for categorizing mixed phenomena of Sacai's knit design were established through a review of literature and data analysis. The study's data collection period was from 2012 to 2021, and a total of 174 items were analyzed. The following are the results. First is the fusion of traditional knit and contemporary styles expressed through de-constructive design; traditional knit styles are combined with contemporary styles through color, material, and knitting structure mixtures, such as mixing Northern European Aran, Fair Isle, Nordic, and Ropy knit. Second, the Sakai knit design combines male and female styles by mixing materials and details. A deconstructed knit cardigan was matched with androcentric pin-striped shirts worn over layered shirring skirts embellished with chiffon and lace. Third, everyday street fashion style is blended with a formal, elegant fashion style. For example, the front view has a typical everyday appearance, whereas the back view contains florid and decorated details. The style is expressed as a 360-degrees appellation, with one thing in the front and another in the back. Sacai's distinctive expressional characteristics include a mixed and de-constructive style characterized by unexpected design.

• Clean Technology
• /
• v.7 no.1
• /
• pp.81-88
• /
• 2001

Limestone has been used as absorbent in the FGD(Flue Gas Desulfurization) system, the DeSOx system of thermal power plant. This study investigated the desulfurization characteristics of the two different limestones, 325mesh and 200mesh particle size. Experimental analysis showed that the dissolving rate of limestone became much slower as the particle size increased. But the desulfurization efficiency depended on the L/G(liquid/gas) ratio and slurry pH regardless of the limestone particle size. The quality of gypsum produced in the FGD process increased as the limestone particle size or the slurry pH decreased. To reduce the cost of absorbent, the mixed limestone which were composed of 200 and 325mesh limestone with 5 different ratios were tested.