• Journal of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.273-278
• /
• 1983

With the synthetic standards, valuable metals $(Ta_2O_5, Nb_2O_5, TiO_2, SnO_2$, and $ZrO_2$) in the tin slags have been determined by the x-ray fluorescence spectrometry. The powder sample and the standards are homogeneously mixed with anhydrous $Li_2B_4O_7$ and La_2O_3$ in weight ratio of 15 : 42 : 3 respectively. The mixed material is fused at $1,150^{\circ}C$ for 30 minutes to be changed into the glass bead. The bead is ground to (-) 325 mesh size and pelletized. The analytical results obtained in this work are consistent with the data obtained by other common methods within allowable error range. The standard deviation for $Ta_2O_5$ in PTS-H sample is 0.12 % at level of 3.40 % content.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2179-2187
• /
• 2008

The P2P technology has been widely used to distribute files efficiently, and its use in streaming is rapidly increasing. P2P streaming has issues about startup-delay, scalability, and real-time playback, however, what affects these factors has not been researched sufficiently. This paper suggests a buffering model for progressive download within mesh-based P2P system, which corresponds to downloading and playing the content at the same time. It is used to analyze PDF(Playback Deadline First), Rarest algorithms which are block-selection strategies of P2P streaming and proposes a mixed selection of them. The mixed block selection strategy dynamically performs different strategies based on whether the blocks to be played are received or not. In consequence, it enhances the QoS of streaming in a single peer point of view, as well as improving block distributions in an overlay network.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.4
• /
• pp.611-615
• /
• 1992

Problems with maintaining service and equipment in some developing countries suggest that the rumen bag technique may be more appropriate for the determination of plant dry matter digestibility. The technique has been adapted for use in goats in the 16-25 kg liveweight range. Reliable results were obtained for animals maintained under shelter in cages and fed on a mixed legume/grass diet. The results showed that up to 7 bags containing dried and ground (2 mm screen) plant samples (1-3 g) could be satisfactorily used in each goat. The digestibility of the legumes studied did not increase with incubation times over 48 hours, but there was an increase in the digestibility of grasses. However an incubation time of 48 hours was adapted for both legumes and grasses as it allowed more efficient work scheduling for large numbers of samples while still giving acceptable comparisons between species. Losses of material from the bags during a 6 hour soaking in water were 2-9% as fine solids and 14-21% in solution. In the method finally adapted the disappearance was measured for plant samples that were placed in Dacron mesh bags ($7{\times}14cm$, 44 micron) and 6 bags suspended in the rumen of each sheep for 48 hours.

• Journal of the East Asian Society of Dietary Life
• /
• v.16 no.2
• /
• pp.180-185
• /
• 2006

To develop a new instant pumpkin gruel food, this study investigated the dried powder and gruel quality characteristics depend on drying method. The pumpkin powder was dried by infrared and freeze drying, and then milled to 80 mesh, after which the manufactured gruel was mixed with glutinous rice by heating. The gruels prepared by dried pumpkin powder were compared with steamed and freeze dried powder as a control, the crude protein and total sugar contents were high in the infrared drying powder, but freeze drying kept more carotenoid content. Soluble solid of gruel was higher in the freeze dried powder, and steam treated powder showed increased L and b values. Sensory test was carried out to select proper drying methods with 5-point scale. The gruel with freeze dried powder gained the highest score in overall quality. These results suggest that freeze drying could be used for manufacturing high quality instant pumpkin gruel.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.4
• /
• pp.395-405
• /
• 2004

The filling pattern and an adaptive grid refinement based on the finite element method and Eulerian mesh advancement approach have been developed to analyze incompressible transient viscous flow with free surfaces. The governing equation for flow analysis is Navier-Stokes equation including inertia and gravity effects. The mixed FE formulation and predictor-corrector method are used effectively for unsteady numerical simulation. The flow front surface and the volume inflow rate are calculated using the filling pattern technique to select an adequate pattern among four filling patterns at each triangular control volume. By adaptive grid refinement, the new flow field that renders better prediction in flow surface shape is generated and the velocity field at the flow front part is calculated more exactly. In this domain the elements in the surface region are made finer than those in the remaining regions for more efficient computation. Using the proposed numerical technique, the collapse of a water dam has been analyzed to predict flow phenomenon of fluid and the predicted front positions with respect to time have been compared with the reported experimental results.

• Journal of Mechanical Science and Technology
• /
• v.18 no.6
• /
• pp.1026-1035
• /
• 2004

An immersed boundary method for solving the Navier-Stokes and thermal energy equations is developed to compute the heat transfer over or inside the complex geometries in the Cartesian or cylindrical coordinates by introducing the momentum forcing, mass source/sink, and heat source/sink. The present method is based on the finite volume approach on a staggered mesh together with a fractional step method. The method of applying the momentum forcing and mass source/sink to satisfy the no-slip condition on the body surface is explained in detail in Kim, Kim and Choi (2001, Journal of Computational Physics). In this paper, the heat source/sink is introduced on the body surface or inside the body to satisfy the iso-thermal or iso-heat-flux condition on the immersed boundary. The present method is applied to three different problems : forced convection around a circular cylinder, mixed convection around a pair of circular cylinders, and forced convection around a main cylinder with a secondary small cylinder. The results show good agreements with those obtained by previous experiments and numerical simulations, verifying the accuracy of the present method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.3
• /
• pp.455-459
• /
• 2001

Tofu (soybean curd) was made with whole soybean flour (WSF, 420 mesh) by various processing conditions of water addition ratio, heating time, coagulation temperature, molding pressure and 0.3% of mixed coagulant (CaSO₄:GDL=50:50(w/w)). Yield content of WSF-tofu was the highest in processing condition of 85℃ coagulation temperature, 10 times water addition, 5min. heating time and 25.00 g/㎠ molding pressure. As the increase of the water addition ratio from 8 to 14 times (water:WSF, v/w), Hunter's L and a values were increased. Raising of heating time (100℃, 1, 5, 10 and 15 min), a and b value were increased. Textural properties of WSF-tofu were significantly affected by coagulation temperature (75, 80, 85 and 90℃). Hardness was increased, but adhesiveness and cohesiveness were decreased. heating time was influenced on harness of WSF-tofu, but water addition ratio was not affected on hardness of WSF-tofu. Increasing of molding pressure (16.83, 25.00, 33.22 and 41.67 g/㎠, 1 hr) was resulted from a increased hardness, gumminess and chewingss of tofu, but adhesiveness was addition ratio, 5 min heating time and 25.00 g/㎠ molding pressure recorded the highest score in sensory evaluation test.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.7 s.166
• /
• pp.1205-1214
• /
• 1999

A new quadrilateral plane stress element is developed for efficient and accurate analysis of thermal stress problems. It is convenient to use the same mesh and the same shape functions for thermal analysis and stress analysis. But, because of the inconsistency between deformation related strain field and thermal strain field, oscillatory responses and considerable errors in stresses are resulted in. To avoid undesired oscillations, strain approximation is enhanced by supplementing several assumed strain terms based on the variational principle. Thermal deformation is incorporated into the generalized mixed variational principle for displacement, strain and stress fields, and basic equations for the modified enhanced assumed strain method are derived. For the stress approximation of bilinear elements, the $5{\beta}$ version of Pian and Sumihara is adopted. The numerical results for several problems show that the present element behaves well and reduces oscillatory responses. it also results in almost the same magnitude of error as compared with the quadratic element.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.2
• /
• pp.8-15
• /
• 2008

Wastewoods (logging residues) generated in Korea were used to make lignocellulosic fillers for papermaking. Lignocellulosic fillers could play great roles to increase retention efficiency and thus decrease turbidity of white water in papermaking process. In addition, lignocellulosic fillers could be used to improve physical properties of paper through their high affinity to cellulosic fibers, leading to the less use of chemical additives like retention aids. Wastewoods including Pinus densiflora and Quercus variabilis were chemically and mechanically treated for making fine particles passing through 100 mesh wire. The newly generated fillers showed larger particle size distribution than ground calcium carbonates but similar distribution to talc. In particular, pretreatment by hot water was more effective to generate smaller particle size than by alkali treatment. Lignocellulosic particles mixed with ground calcium carbonates under intense hybridizing condition greatly contributed to surface coverage of organic fillers in addition to filling to lumen and pits.

• The Korea Journal of Herbology
• /
• v.20 no.2
• /
• pp.17-26
• /
• 2005

Objectives : The study has been undertaken to scrutinize the results of Halloysitum Rubrum before and after physical and chemical manipulation. Methods : I used X-rays diffracted analysis system(Phillips X'Pert - MPD System) on condition of 40Kv, Anode of Cu Ka to grasp the compositions of crude Halloysitum Rubrums which have been from here and there after pulverization them below 200 mesh. X-rays fluorescence analysis system have been used to check the chief elements content of the ore on condition of 40Kv, 95mA. ICP-MS analysis system(Perkin Elmer, Elan 6100)have been used after a micro-elements and a heavy metals take advantage of mixed acid were dissolved completely. Results : The compositions of the ore Halloysitum Rubrum are composed of large amount of Halloysite and Kaolinite, and small amount of Hematite, Alum, quartzite. The chief elements content of the ore Halloysitum Rubrum are composed of Al and Si. A heavy metals in Halloysitum Rubrum are As, Cd, Cr, Cu, Pb, Zn, etc. As and Zn's amounts was lessen after physical and chemical manipulation Halloysitum Rubrum are decreased at $400^{\circ}C\;and\;450-500^{\circ}C$ each by heat analysis system. Conclusion : Results of this study show that Halloysitum Rubrum can be used in a diverse ways to treat many kinds of disease.