• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.92-99
• /
• 2021

CaO-based by-products composed of CaO, SO3, Al2O3, etc. are generally used as raw materials for CaO compounds. When applied to the recovered water of ready-mixed concrete, the hydration reaction of the powder material is accelerated and concrete performance can be improved. In this study, activated sludge was prepared to apply to the recovered water of ready-mixed concrete by mixing CaO-based hot-rolled slag(C12A7) in the recycling water of ready-m ixed concrete. Cem ent paste setting time and mortar compressive strength performance tests confirmed the effect on the hydration reaction. Therefore, the possibility of concrete application using activated sludge was confirmed.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.1
• /
• pp.35-43
• /
• 2023

In this study, the mechanical properties of concrete mixed with non-sintered hwangto(NHT) as an alternate material for cement were evaluated, and the compressive strength prediction equation of concrete based on ultrasonic pulse velocity analysis was proposed. Cement replacement rates for mixed NHT were set to 0, 15, and 30%, and design compressive strength was set to 30 and 45MPa to evaluate the effect on the amount of cement and NHT powder. The mechanical properties items analyzed were compressive strength, ultrasonic pulse velocity, and elastic modulus, and were measured on days 1, 3, 7, and 28. As the replacement rate of NHT increased, the mechanical properties tended to decrease. In addition, as a result of analyzing the correlation between compressive strength and ultrasonic pulse velocity, the correlation coefficient(R²) showed a high relationship(R²=0.95) on concrete mixed with NHT.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.391-399
• /
• 2023

Recently, low-temperature pyrolysis technology has been studied as a recycling method for waste plastic. Low-temperature pyrolysis technology for waste plastic produces pyrolysis oil that can be used as an energy resource, but solid residue remains. Waste plastic pyrolysis residues are mostly landfilled due to their limited use. In this study, it is investigated that mixed waste plastic pyrolysis residues could be recycled into activated carbon. It was confirmed that the fixed carbon content of the residue was 33.69 % from proximate Analysis. Chemical activation was used to manufacture activated carbon. KOH was used as an activator. To investigate the effect of the mixing ratio of KOH and residue, samples were mixed at ratios of 0.5, 1.0, and 2.0. The mixed sample was chemically activated at an activation temperature of 800 ℃ for 1 hour. As a result of analyzing the characteristics of activated carbon through BET, it was confirmed that the specific surface area increased as the mixing ratio of KOH increased.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1093-1099
• /
• 2022

The number of buildings is increasing day by day. The next logical footstep is tackling challenges regarding scarcity of resources and sustainability, as well as shifting focus on existing building structures to renovate and retrofit. Many existing old and heritage buildings lack documentation, such as building models, despite their necessity. Technological advances allow us to use virtual reality, augmented reality, and mixed reality on mobile platforms in various aspects of the construction industry. For these purposes, having a BIM model or high detail 3D model is not always necessary, as a simpler model can serve the purpose within many mobile platforms. This paper streamlines a framework for generating a lightweight 3D model for mobile platforms. In doing so, we use an existing structure's site survey data for the foundation data, followed by mobile VR implementation. This research conducted a pilot study on an existing building. The study provides a process of swiftly generating a lightweight 3D model of a building with relative accuracy and cost savings.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.13-20
• /
• 2005

In this study, consolidation test and numerical analysis were performed with the aim of investigating the characteristics of consolidation behavior of mixed soil with the amount and particle shape of inserted materials. Mixed soil was made up of matrix (dredged clay) and inserted material (crashed oyster shell and/or sand). The concept of stress share ratio was introduced to evaluate the consolidation characteristics of mixed soils. And the finite differential numerical analysis was carried out by applying the Mikasa's consolidation theory. From the results of experiments and numerical analysis, it was verified that mixed soil consolidation behavior is affected by changes in inserted material. When a similar amount of granular material was inserted, the compressibility of the clay matrix of oyster shell mixed soil was smaller than that of sand mixed soil.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2751-2756
• /
• 2012

Selection of training set influences the classification accuracy in supervised classification using satellite imagery. Generally, if pure pixels which character of training set is clear were selected, whole accuracy is high while if mixed pixels were selected, accuracy is decreased because of low-resolution imagery or unclear distinguishment. However, it is too difficult to choose the pure pixels as training set actually. Accordingly, this study should be suggested the suitable classification method in case of mixed pixels choice. To achieve this, a few pure pixels were chosen as training set and classification accuracy was calculated which was compared with classification result using an equal number of mixed pixels. As a result, accuracy of SVM was the highest among the classification method using mixed pixels and it was a relatively small difference with the result of classification using pure pixels. Therefore, imagery classification using SVM is most suitable in the mixed area of construction and green because it is high possibility to choose mixed pixels as training set.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.11a
• /
• pp.437-441
• /
• 2008

The community mixed-support facility in Japan is making efforts to try various approaches according to the changes made to allow the privatization of public facilities on the basis of Act on Special Measures for Urban Regeneration since 2004. Due to this change in policy, the community mixed-support facility is now taking further steps in trying to implement variety of approaches in the perspective of urban regeneration and urban maintenance and at the same time the trend of installation of community facility has gone through vivid changes for the last 20 years. The causes of this are from the social demand that claims for of new facilities and the change in the subsidy system in relation to equality in facility installation. Examples of the first cause can be the building of perpetuating educational society, an execution or a movement towards the society of gender equality, a countermovement for an aging society as well as a welfare society, and recently social phenomenon related to consumption is becoming an issue. And for the last, the number of construction of facilities is increasing that grow out of the traditional facility system. The complex of community mixed-support facility will provide public administrative and community mixed-support services to local people as well as to form a notion of community and a feeling of solidarity. Ultimately, this will develop local areas by regional interchanging of information. In this very research, we will analyze the community mixed-support facility and its characteristics as well as its implications and consider the types of complex through many preceding instances in Japanese community mixed-support facility.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.2
• /
• pp.125-132
• /
• 2021

In this paper, We propose a study on the construction of an environment for collaboration in mixed reality and a method for working with wearable IoT devices. Mixed reality is a mixed form of virtual reality and augmented reality. We can view objects in the real and virtual world at the same time. And unlike VR, MR HMD does not occur the motion sickness. It is using a wireless and attracting attention as a technology to be applied in industrial fields. Myo wearable device is a device that enables arm rotation tracking and hand gesture recognition by using a triaxial sensor, an EMG sensor, and an acceleration sensor. Although various studies related to MR are being progressed, discussions on developing an environment in which multiple people can participate in mixed reality and manipulating virtual objects with their own hands are insufficient. In this paper, We propose a method of constructing an environment where collaboration is possible and an interaction method for smooth interaction in order to apply mixed reality in real industrial fields. As a result, two people could participate in the mixed reality environment at the same time to share a unified object for the object, and created an environment where each person could interact with the Myo wearable interface equipment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.219-226
• /
• 2008

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.144-145
• /
• 2016

In this study, the research to be utilized as a binder to increase the early strength of concrete polysilicon sludge is a byproduct industries. In this paper, there is a purpose to confirm the initial strength performance of polysilicon sludge.