• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.273-277
• /
• 1998

The synthesis of hydroxy-terminated poly(propylene carbonate)(HTPPC) was performed by the reaction of propylene carbonate(PC) with alcohol initiator using metal alkoxides, crown ethers and quaternary onium salts as catalysts. The effects of catalyst structure, types and concentration of alcohol, and solvent were investigated. Among the alkoxide catalysts tested, the ones with higher Lewis acidity and with more nucleophilic alkoxide anion showed higher catalytic activity. Mixed catalysts of metal alkoxied and crown ether showed higher conversion of PC than metal alkoxide alone. Quaternary onium salts of bulky cation exhibited higher catalytic activity. High polar solvent showed higher yield of HTPPC and the yield increased with the decrease of [PC]/[Initiator] ratio.

• Journal of the Korean Ceramic Society
• /
• v.30 no.7
• /
• pp.535-542
• /
• 1993

It was investigated in this study that a preparation method, activation energy, surface area, pore volume, pore size distribution and DTA analysis of the dry gel in process of producing monolithic porous gel in Li2O-Al2O3-TiO2-SiO2 system by the sol-gel technique using metal alkoxides. Activation energy for gellation according to the variation of water concentration and the kind of catalysts ranged from 10 to 20kcal/mole. Monolithic dry gels were prepared after drying at 9$0^{\circ}C$ when the amount of water for gellation was 4~8 times more than the stoichiometric amount, that was necessary for the full hydrolysis of the mixed metal alkoxide. The specific surface area, the pore volume, the average pore radius of the dried gel at 18$0^{\circ}C$ according to the various kinds of catalyst were about 348~734$m^2$/g, 0.35~0.70ml/g and 10~35$\AA$, respectively. It showed that the dry gels were porous body. As a result ofthe analysis of DTA, it was confirmed that the exothermaic peaks at 715$^{\circ}C$ and 77$0^{\circ}C$ was clue to the crystallization of dried gel.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.520-520
• /
• 2009

Organic by-products derived from cellulose and lignin during organosolv pretreatments of yellow poplar wood (Liriodendron tulipifera) in the presence of $H_2SO_4$ and NaOH as catalysts, respectively, were subjected to various analyses to elucidate their effects on further performance of biological ethanol fermentation and provide preliminary data for the structure and utilization of organosolv lignin. Monomeric sugars amounted to ca. 2.2-7.7% in the organosoluble fraction of the organosolv pretreatment with $H_2SO_4$, while significantly low amount of sugars (0.2-0.3%) were determined in that of the organosolv pretreatment with NaOH. In case of addition of $H_2SO_4$ during organosolv pretreatment of biomass, a fermentation of the organosoluble fraction could be considered as an essential process to increase an efficiency of biomass utilization as well as yield of bioethanol. Precipitates, insoluble by-products in the solvent mixture, were also cficiency oed by diverse analytical methods and revealed that these were typically composed of a lignin moiety regardless of catalyst. According to the results of nuclear magnetic resonance (NMR), Fourier Tcinsform Infrared Spectroscopy (FT-IR) and Gel permeation chromatograp r (GPC), the main components of precipitates seem to be lignin polymers. However, their structures could be slightly modified during pretreatment and mixed with some carbohydrates by chemical bonds and/or physical associations.

• Textile Coloration and Finishing
• /
• v.18 no.6 s.91
• /
• pp.16-24
• /
• 2006

The purpose of this study is to improve the defects of chitosan crosslinked viscose rayon by ECH and to describe the change of hand of chitosan crosslinked viscose rayon fabrics. The chitosan crosslinked viscose rayon were manufactured by crosslinking process using ECH as crosslinking agent, 2 wt% aqueous acetic acid as a solvent of chitosan and ECH, and 20 wt% aqueous sodium hydroxide as crosslinking catalyst. Viscose rayon were first immersed in the pad bath of the mixed solution of chitosan and ECH, padded up to 100 wt% wet pick-up on weight of fiber(owf), precured on pin frames at $130^{\circ}C$ for 2 minutes, immersed in NaOH solution and finally wash and dry. Antimicrobial properties of the viscose rayon treated with chitosan were measured by the shake flask C.T.M. 0923 test method with staphylococcus aureus(ATCC 6538) as the microorganism. When the concentration of chitosan was increased chitosan crosslinked viscose rayon's LT, WT, B, 2HB and MIU were increased and G, 2HG, SMD, T and $T_m$ were decreased. On the other hand, WT, EM were decreased and RT was increased at $1{\times}10^{-2}M$ ECH. The optimum condition for crosslinking was that ECH concentration was between $1{\times}10^{-2}M\;and\;5{\times}10^{-2}M$. Antimicrobial effects of rayon fabric treated with chitosan was excellent.

• Korean Journal of Crystallography
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2003

NiZn-ferrites were synthesized from the waste catalysts. which were by product of styrene monomer process and buried underground as an industrial wastes, and their magnetic properties were investigated. Nickel oxide and zinc oxide powders were mixed with finely ground waste catalysts, and spinel type ferrite was obtained by calcination at 900℃ and sintering at 1325℃ for 5 hours. The initial permeabilities were measured and reflection losses were calculated from S-parameters for the composition of Ni/sub x/Zn/sub 1-x/Fe₂O₄(x=0.36, 0.50, 0.66) and (Ni/sub 0.5/Zn/sub 0.5)/sub 1-y/Fe/sub 2+y/O₄(y=-0.02, 0, 0.02).

• Bulletin of the Korean Chemical Society
• /
• v.28 no.1
• /
• pp.53-58
• /
• 2007

In the dehydrogenation of ethylbenzene to styrene, CO2 could play a role as an oxidant to increase conversion of ethylbenzene and stability as well over TiO2-ZrO2 mixed oxide catalysts. TiO2-ZrO2 catalysts were prepared by co-precipitation method and were characterized by BET surface area, bulk density, X-ray diffraction, temperature programmed desorption of NH3 and CO2. These catalysts were found to be X-ray amorphous with enhanced surface areas and acid-base properties both in number and strength when compared to the respective oxides (TiO2 and CO2). These catalysts were found to be highly active (> 50% conversion), selective (> 98%) and catalytically stable (10 h of time-on-stream) at 600 oC for the dehydrogenation of ethylbenzene to styrene. However, in the nitrogen stream, both activity and stability were rather lower than those in the stream with CO2. The TiO2-ZrO2 catalysts were catalytically superior to the simple oxide catalysts such as TiO2 and ZrO2. The synergistic effect of CO2 has clearly been observed in directing the product selectivity and prolonging catalytic activity.

• Industry Promotion Research
• /
• v.7 no.1
• /
• pp.9-15
• /
• 2022

This study tried to analyze the growth background of Starbucks, a competitive company in the Korean coffee industry. Therefore, by using the STEEP analysis technique, each company's competitiveness was analyzed and the results were used to derive competitive factors. And the research results are as follows. Looking at the social aspect, economic activity has been a catalyst for women as the standard of living has increased due to economic growth. In addition, in the case of coffee culture in the past, Starbucks' response strategy, which has seen the transformation from vending machine mixed coffee culture to a consumer market that emphasizes cultural and spatial aspects, was effective. Looking at the technical aspect, the deviation has been reduced by securing uniform standardization of the taste of coffee beans at franchise stores, and the operation of a standardized operating system was possible by operating the store directly. And looking at the economic aspect, as the coffee consumption market continues to expand, the overall size of the market has also grown proportionally, creating a stable growth environment. Lastly, looking at the environmental and policy aspects, it is that the marketing strategy direction based on the policy activities as an eco-friendly company as a market leader has been the main focus of the recent policy direction emphasizing eco-friendliness.

• Journal of the Korean institute of surface engineering
• /
• v.57 no.1
• /
• pp.22-30
• /
• 2024

This study reports a direct growth of carbon nanotubes (CNTs) on the surface of LiCoO₂ (LCO) powders to apply as highly efficient cathode materials in lithium-ion batteries (LIB). The CNT synthesis was performed using a thermal chemical vapor deposition apparatus with temperatures from 575 to 625 ℃. Ferritin molecules as growth catalyst of CNTs were mixed in deionized (DI) water with various concentrations from 0.05 to 1.0 mg/mL. Then, the LCO powders was dissolved in the ferritin solution at a ratio of 1g/mL. To obtain catalytic iron nanoparticles on the LCO surface, the LCO-ferritin suspension was dropped in silicon dioxide substrates and calcined under air at 550℃. Subsequently, the direct growth of CNTs on LCO powders was performed using a mixture of acetylene (10 sccm) and hydrogen (100 sccm) for 10 min. The growth behavior was characterized by scanning and transmission electron microscopy, Raman scattering spectroscopy, X-ray diffraction, and thermogravimetric analysis. The optimized condition yielding high structural quality and amount of CNTs was 600 ℃ and 0.5 mg/mL. The obtained materials will be developed as cathode materials in LIB.

• Analytical Science and Technology
• /
• v.28 no.3
• /
• pp.182-186
• /
• 2015

In this study, the porous CuO/MnO₂ catalyst was prepared through the co-precipitation process from an aqueous solution of potassium permanganate (KMnO₄), manganese(II) acetate (Mn(CH₃COO)₂·4H₂O) and copper(II) acetate (Cu(CH₃COO)₂·H₂O). The phase change in MnO₂ was analyzed according to the reaction molar ratio of KMnO₄ to Mn(CH₃COO)₂. The reaction mole ratio of KMnO₄ to Mn(CH₃COO)₂·4H₂O was varied at 0.3:1, 0.6:1, and 1:1. The aqueous solution of Cu(CH₃COO)₂ was injected into a mixed solution of KMnO₄ and Mn(CH₃COO)₂ to 10~75 wt% relative to MnO₂. The Cu ion co-precipitates as CuO with MnO₂ in a highly dispersed state on MnO₂. The physicochemical property of the prepared CuO/MnO₂ was analyzed by using the TGA, DSC, XRD, SEM, and BET. The different phase types of MnO₂ were prepared according to the reaction mole ratio of KMnO₄ to Mn(CH₃COO)₂·4H₂O. The results confirmed that the porous CuO/MnO₂ catalyst with γ-phase MnO₂ was produced in the reaction mole ratio of KMnO₄ to Mn(CH₃COO)₂ as 0.6:1 at room temperature.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.888-901
• /
• 1996

Oxidations of cyclopentene and of 1-pentene with air have been studied on a V/Mo/P/Al/Ti-mixed oxide catalyst in a fixed bed integral reactor. At high levels of conversion maleic anhydride was in each case produced as the major organic product, along with minor amounts of phthalic anhydride and, only starting from 1-pentene, also of citraconic anhydride. At lower levels of conversion a total of 30 organic products have been identified, some of which may be intermediates on the way from the substrates to the three anhydrides mentioned above. Based on the dependence of selectivities of the organic products on conversion, reaction schemes for the formation of maleic anhydride, phthalic anhydride and citraconic anhydride have been proposed. Oxidation at $310^{\circ}C$ led to increasing conversions and selectivities for maleic anhydride with decreasing space velocities. The highest selectivities for maleic anhydride were obtained at conversion of ca. 100%. Oxidation at a constant space velocity of $2{\cdot}10^4h^{-1}$ led to increasing conversions with increasing temperatures in the range of $300^{\circ}C{\sim}420^{\circ}C$, while the selectivity for maleic anhydride passed through a maximum value of ca. 39% at $370^{\circ}C$ in the oxidation of cyclopentene and a maximum value of ca. 30% at $400^{\circ}C$ in the oxidation of 1-pentene.