• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.2
• /
• pp.83-90
• /
• 2016

This study was performed to evaluate the effective analysis of flexural performance for polypropylene fiber (PF) reinforced EVA concrete that can be used in marine bridge, tunnel and agricultural structures under flexural load. The control design was applied in ready mixed concrete using 10 % fly ash of total binder weight used in batch plant. On the basis of the control mix design, there was designed mix types that contained PF ranged from 0 % to 0.5 % by volume ratio into two mix types of using 0 % and 5.0 % EVA contents of total binder weight. Before evaluating the flexural performance, we tested compressive strength and flexural strength to evaluate whether polypropylene fiber reinforced concrete could be used or not in site. The method of flexural performance evaluation was applied by ASTM C 1609. These results showed the maximum compressive strength and flexural strength was measured at each E5P1 and E5P2. Concrete reinforced with PF exhibited deflection-softening behavior. In the concrete reinforced with 0.4 % PF contents and containing 5.0 % EVA, the flexural performance was the best.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.5
• /
• pp.218-226
• /
• 2011

Low heat concrete using strontium hydroxide based latent heat material was manufactured in ready-mixed concrete batcher plant and its fundamental properties were tested. As a result of B/P test, its applicability to the construction site was verified. After B/P test, low heat concrete using strontium hydroxide based latent heat material was applied to the real construction site of bridge footing. Through the analysis and the actual measurement of the hydration heat of the concrete footing, the reduction effect of hydration heat and thermal crack was confirmed.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3420-3424
• /
• 2013

The reaction of $LnCl_3{\cdot}7H_2O$ [Ln = La (1), Ce (2)] with salicylic acid (HL) and 1,10-phenanthroline (Phen) at $20^{\circ}C$ in $H_2O$/ethanol gave after work-up and recrystallization two novel lanthanide complexes with general formula $[Ln(Phen)_2(L)_3(HL)]{\cdot}H_2O$. Compounds 1 and 2 were characterized by IR and UV-Vis spectroscopy, TGA, CHN as well as by X-ray analysis. According to these results, compounds 1 and 2 are isostructural and contain $Ln^{3+}$ ions with coordination number nine. Complexes 1 and 2 consist of two Phen, one neutral HL and three L anions (two L anions act as monodentate ligands and the third one is chelating to $Ln^{3+}$). Thermal decomposition led to primary loss of the Phen molecules. Then HL molecules and finally L moieties left the material to give $Ln_2O_3$.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.6
• /
• pp.11-20
• /
• 2015

This paper describes design and implementation experience of SAS-G2S slotmachine accounting protocol middleware system that converts the legacy binary format SAS (Slot Accounting System) protocol with servers with recent standards G2S protocol. The paper examines the difference of two protocols such as link control, message format, and parameters. The converter architecture uses bridge and connector patterns and implemented in C++ and Python mixed language on Linux environment. The prototype system uses a 1GMHz-512MB linux machine and has passed Korean official protocol compatibility and performance test in 2015.

• Journal of Environmental Science International
• /
• v.19 no.5
• /
• pp.639-646
• /
• 2010

Differently from fly ash, the bottom ash produced from incinerated urban solid waste has been treated as an industrial waste matter, and almost reclaimed a tract form the sea. If this waste material is applicable to foam concrete as an fine aggregate, however, it may be worthy of environmental preservation by recycling of waste material as well as reducing self-weight of high-rising structure and long-span bridge. This research has an objective of evaluating the effects of application of bottom ash on the mechanical properties of foam concrete. Thus, the ratio of bottom ash to cement was selected as a variable for experiment and the effect was tested by compression strength, flexural strength, absorption ratio, density, expansion factor. It can be observed from experiments that the application ratios have different effects on the material parameters considered in this experiment, thus major relationship between application ratio and each material parameter were finally introduced. The result of this study can be applied to decide a optimal mix design proportion of foam light-weight concrete while bottom ash is used as an fine aggregate of the concrete.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1193-1195
• /
• 2004

Ozone gas is one of the strongest oxidizing and bleaching agents which leave no residues harmful to the global environment. In recent years, the ozone generator has been widely utilized, However, it has been known that a broader application of ozone is hindered primarily because of its low efficiency of generation. Thus, it is more indispensable to improve actual system efficiency of the silent discharge type ozonizer using high frequency inverter. This paper presents a multi level resonant ozone power regulation by association of high frequency transformers and full bridge invert. And proposed resonant inverter system can generate continuous output voltage. can control linearly quantity of ozone gas. This invert that add PWM forms within square forms of output voltage about one level range. The power regulation characteristics and operating performances of silent discharge (SD)type ozone generating tube load driven by this load proposed inverter using FET modules are illustrated from a practical point of view, which can operate under stable conditions of basic level and PWM hybrid control strategy implemented DSP(2406). The effectoveness of propsed invert type ozonizer is proved by experiment results.

• ALGAE
• /
• v.21 no.2
• /
• pp.193-208
• /
• 2006

Porphyra pulchella sp. nov. Ackland, West, Scott and Zuccarello was obtained at Mimosa Rock National Park, New South Wales; Westgate Bridge, Victoria, Australia; and Waihau Bay, North Island, New Zealand. It occurs mainly in mangrove habitats and is very small (± 1 mm) in field collections. In laboratory culture at 21 ± 2°C tiny blades (0.5-3.0 mm) reproduced exclusively by archeospores liberated from vegetative cells of the upper sector of the blades. The archeospores displayed amoeboid and gliding motility once discharged. At 14 ± 2°C the blades grew to 25 mm and produced longitudinal spermatangial streaks mixed with ‘phyllosporangial’ streaks. The discharged ‘phyllospores’ showed amoeboid motility and germinated forming asexual blades. A conchocelis phase with typical bangiophycidean pit connections was observed in blade cultures after 8-10 weeks at 14 ± 2°C. Conchocelis filaments produced conchosporangia and these released amoeboid conchospores that developed into archeosporangiate blades. Molecular data indicate that all 3 isolates are genetically identical.

• Journal of Technologic Dentistry
• /
• v.8 no.1
• /
• pp.37-43
• /
• 1986

The purpose of this study is to evalute the effects of melting and casting procedures on the castability of some N-Cr and Ag-Pd alloys. One Ag-Pd alloy and two Ni-Cr alloys were chosen for study, and the first casting group of these alloys were used as the control, and with which the castability of the first recase group and the mixture group of the first recast and as much amount of the first casting alloy was compared. The results of this study were as follows: 1. The castability of the first recast alloys veried significantly depending upon the presence or abscence of the first casting alloy and the kind of alloys. 2. When the first recast alloy was mixed with as much amount of the first casting alloy, there was no significant difference in castabilityh between the first recast group and the first casting group. 3. When the first recast alloy was used alone, the castability veried significantly depending upon the kind of alloys, i.e., the castability of Rexillium III and Palliag M was decreased significantly when compared with that of the first casting groups, while that of C & B Alloy was not.

• Geomechanics and Engineering
• /
• v.16 no.5
• /
• pp.559-567
• /
• 2018

Technological innovations in sustainable materials for soil improvement have attracted considerable interest due to energy crisis and environmental concerns in recent years. This study presents results of a comprehensive investigation on utilization of nanocarbons in reinforcement of a residual soil mixed with 0, 10 and 20% bentonite. Effects of adding proportionate quantities (0, 0.05, 0.075, 0.1 and 0.2%) of carbon nanotubes and carbon nanofibers to soil samples of different plasticities were evaluated. The investigation revealed that the inclusion of nanocarbons into the soil samples significantly improved unconfined compressive strength, Young's modulus and indirect tensile strength. It was observed that carbon nanofibers showed better performance as compared to carbon nanotubes. The nanosized diameter and high aspect ratio of nanocarbons make it possible to distribute the reinforcing materials on a much smaller scale and bridge the inter-particles voids. As a result, a better 'soil-reinforcing material' interaction is achieved and desired properties of the soil are improved at nanolevel.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.7
• /
• pp.59-68
• /
• 2018

Salk Institute for Biological studies is widely considered as architectural masterpiece of Louis Kahn's. Its iconic plaza with symmetrical concrete structures, overlooking the Pacific ocean in La Jolla, has been acclaimed as a facade to the sky. Little has been written on Kahn's achievements in the building system integration in order to bridge the gap between technology and design. This paper explores the technical issues, the design intents, and the major building systems to identify the Kahn's integration methods between building systems. The project is analysed into four major systems; structure, mechanical, envelope, and interior system. The integration methods of building systems are investigated in physical, visual, and functional aspects. The most distinguished cases of building system integration are the introduction of the interstitial floors between the laboratories and the creation of the smooth and warm materiality of exposed concrete walls. Kahn proposed open floor plans for the laboratories which are capable of easily adapting to changing needs. He also introduced the interstitial floors which are framed of the vierendeel truss systems and deliberately overlapped the structure systems with the mechanical systems such as ducts, water pipes, and electric conduits. The exposed concrete walls mixed with pozzolan ashes look very much like granite or limestone as the result of the physical and visual integration between structure, envelope, and interior systems.