Browse > Article
http://dx.doi.org/10.12989/gae.2018.16.5.559

Compressive and tensile strength enhancement of soft soils using nanocarbons  

Taha, Mohd R. (Department of Civil and Structural Engineering, Universiti Kebangsaan Malaysia (UKM))
Alsharef, Jamal M.A. (Department of Civil and Structural Engineering, Universiti Kebangsaan Malaysia (UKM))
Khan, Tanveer A. (Department of Civil Engineering, Bahauddin Zakariya University)
Aziz, Mubashir (Department of Civil Engineering, National University of Computer and Emerging Sciences)
Gaber, Maryam (Department of Civil and Structural Engineering, Universiti Kebangsaan Malaysia (UKM))
Publication Information
Geomechanics and Engineering / v.16, no.5, 2018 , pp. 559-567 More about this Journal
Abstract
Technological innovations in sustainable materials for soil improvement have attracted considerable interest due to energy crisis and environmental concerns in recent years. This study presents results of a comprehensive investigation on utilization of nanocarbons in reinforcement of a residual soil mixed with 0, 10 and 20% bentonite. Effects of adding proportionate quantities (0, 0.05, 0.075, 0.1 and 0.2%) of carbon nanotubes and carbon nanofibers to soil samples of different plasticities were evaluated. The investigation revealed that the inclusion of nanocarbons into the soil samples significantly improved unconfined compressive strength, Young's modulus and indirect tensile strength. It was observed that carbon nanofibers showed better performance as compared to carbon nanotubes. The nanosized diameter and high aspect ratio of nanocarbons make it possible to distribute the reinforcing materials on a much smaller scale and bridge the inter-particles voids. As a result, a better 'soil-reinforcing material' interaction is achieved and desired properties of the soil are improved at nanolevel.
Keywords
soft soils; nanocarbons; soil improvement; unconfined compression; elastic modulus; indirect tensile strength;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Wang, Z., Ci, L., Chen, L., Nayak, S., Ajayan, P.M. and Koratkar, N. (2007), "Polarity-dependent electrochemically controlled transport of water through carbon nanotube membranes", Nano Lett., 7(3), 697-702.   DOI
2 Yazdani, N. and Mohanam, V. (2014), "Carbon nano-tube and nano-fiber in cement mortar: Effect of dosage rate and water-cement ratio", Int. J. Mater. Sci., 4(2), 45-52.   DOI
3 Lawrence, J.G., Berhan, L.M. and Nadarajah, A. (2008), "Elastic properties and morphology of individual carbon nanofibers", ACS Nano, 2(6), 1230-1236.   DOI
4 Lee, S., Chang, I., Chung, M.K., Kim, Y. and Kee, J. (2017), "Geotechnical shear behavior of Xanthan Gum biopolymer treated sand from direct shear testing", Geomech. Eng., 12(5), 831-847.   DOI
5 Nochaiya, T. and Chaipanich, A. (2011), "Behavior of multi-walled carbon nanotubes on the porosity and microstructure of cement-based materials", Appl. Surf. Sci, 257(6), 1941-1945.   DOI
6 Lehman, J.H., Terrones, M., Mansfield, E., Hurst, K.E. and Meunier, V. (2011), "Evaluating the characteristics of multiwall carbon nanotubes", Carbon, 49(8), 2581-2602.   DOI
7 Li, J., Tang, C., Wang, D., Pei, X. and Shi, B. (2014), "Effect of discrete fiber reinforcement on soil tensile strength", J. Rock Mech. Geotech. Eng., 6(2), 133-137.   DOI
8 Manzur, T. and Yazdani, N. (2016), "Effect of different parameters on properties of multi-walled carbon nanotube-reinforced cement composites", Arab. J. Sci. Eng., 41(12), 4835-4845.   DOI
9 Peyvandi, A., Sbia, L.A., Soroushian, P. and Sobolev, K. (2013), "Effect of the cementitious paste density on the performance efficiency of carbon nanofiber in concrete nanocomposite", Constr. Build. Mater., 48, 265-269.   DOI
10 Rashid, A.S.A., Latifi, N., Meehan, C.L. and Manahiloh, K.N. (2017), "Sustainable improvement of tropical residual soil using an environmentally friendly additive", Geotech. Geol. Eng., 35(6), 2613-2623.   DOI
11 Tang, C.S., Wang, D.Y., Cui, Y.J., Shi, B. and Li, J. (2016), "Tensile strength of fiber-reinforced soil", J. Mater. Civ. Eng., 28(7), 04016031.   DOI
12 Vaisman, L., Marom, G. and Wagner, H.D. (2006), "Dispersions of surface-modified carbon nanotubes in water-soluble and waterinsoluble polymers", Adv. Funct. Mater., 16(3), 357-363.   DOI
13 Fatahi, B., Khabbaz, H. and Fatahi, B. (2012), "Mechanical characteristics of soft clay treated with fiber and cement", Geosynth. Int., 19(3), 252-262.   DOI
14 Jorio, A., Dresselhaus, G. and Dresselhaus, M.S. (2008), Carbon Nanotubes: Advanced Topics in the Synthesis, Structure, Properties and Applications, Springer-Verlag Berlin Heidelberg, Berlin, Germany.
15 Ghasabkolaeia, N., Choobbastia, A.J., Roshana, N. and Ghasemib, S.E. (2017), "Geotechnical properties of the soils modified with nanomaterials: A comprehensive review", Arch. Civ. Mech. Eng., 17(3), 639-650.   DOI
16 Ghazi, H., Baziar, M.H. and Mirkazemi, S.M. (2011), "The effect of nanomaterial additives on the basic properties of soil", Proceedings of the 14th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, Hong Kong, May.
17 Gullu, H. and Fedakar, H.I. (2017), "Unconfined compressive strength and freeze-thaw resistance of sand modified with sludge ash and polypropylene fiber", Geomech. Eng., 13(1), 25-41.   DOI
18 Kamei, T., Ahmed, A. and Ugai, K. (2013), "Durability of soft clay soil stabilized with recycled Bassanite and furnace cement mixtures", Soil. Found., 53(1), 155-165.   DOI
19 Kitazume, M. and Terashi, M. (2017) The Deep Mixing Method, CRC Press, Leiden, The Netherlands.
20 Konsta-Gdoutos, M.S. and Aza, C.A. (2014), "Self-sensing carbon nanotube (CNT) and nanofiber (CNF) cementitious composites for real time damage assessment in smart structures", Cement Concrete Compos., 53, 162-169.   DOI
21 Latifi, N., Meehan, C.L., Majid, M.Z.A. and Horpibulsuk, S. (2016), "Strengthening montmorillonitic and kaolinitic clays using a calcium-based non-traditional additive: A micro-level study", Appl. Clay Sci., 132, 182-193.
22 Firoozi, A.A., Taha, M.R., Firoozi, A.A. and Khan, T.A. (2015), "Effect of ultrasonic treatment on clay microfabric evaluation by atomic force microscopy", Measurement, 66, 244-252.   DOI
23 Aziz, M., Saleem, M. and Irfan, M. (2015), "Engineering behavior of expansive soils treated with rice husk ash", Geomech. Eng., 8(2), 173-186.   DOI
24 ASTM D2487-11 (2011), Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System), ASTM International, West Conshohocken, Pennsylvania, U.S.A.
25 ASTM D3967-16 (2016), Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
26 ASTM D698-12 (2012), Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12400 ft-lbf/ft3 (600 kN-m/m3)), ASTM International, West Conshohocken, Pennsylvania, U.S.A.
27 Babu, G.L.S., Vasudevan, A.K. and Sayida, M.K. (2008), "Use of coir fibers for improving the engineering properties of expansive soils", J. Nat. Fibers, 5(1), 61-75.   DOI
28 Bahmani, S.H., Huat, B.B.K., Asadi, A. and Farzadnia, N. (2014), "Stabilization of residual soil using SiO2 nanoparticles and cement", Constr. Build. Mater., 64, 350-359.   DOI
29 Chaipanich, A., Nochaiya, T., Wongkeo, W. and Torkittikul, P. (2010), "Compressive strength and microstructure of carbon nanotubes-fly ash cement composites", Mater. Sci. Eng., 527(4-5), 1063-1067.   DOI
30 Correia, A.A.S., Venda-Oliveira, P.J. and Custodio, D.G. (2015), "Effect of polypropylene fibers on the compressive and tensile strength of a soft soil, artificially stabilized with binders", Geotext. Geomembranes, 43(2), 97-106.   DOI
31 Akin, D.I. and Likos, W.J. (2017), "Brazilian tensile strength testing of compacted clay", Geotech. Test. J., 40(4), 608-617.
32 Cui, L. (2013), "Incorporation of multiwalled carbon nanotubes to ordinary Portland cement (OPC): Effects on mechanical properties", Adv. Mater. Res., 641-642, 436-439.   DOI
33 Estabragh, A., Namdar, P. and Javadi, A. (2012), "Behavior of cement-stabilized clay reinforced with nylon fiber", Geosynth. Int., 19(1), 85-92.   DOI
34 Abbey, S., Ngambi, S. and Ganjian, E. (2017), "Development of strength models for prediction of unconfined compressive strength of cement/by-product material improved soils", Geotech. Test. J., 40(6), 928-935.
35 Abi-Rekha, L., Keerthana, B. and Ameerlal, H. (2016), "Performance of fly ash stabilized clay reinforced with human hair fiber", Geomech. Eng., 10(5), 677-687.   DOI
36 Abou Diab, A., Sadek, S., Najjar, S. and Abou Daya, M.H. (2016), "Undrained shear strength characteristics of compacted clay reinforced with natural hemp fibers", Int. J. Geotech. Eng., 10(3), 263-270.   DOI
37 Akinwumi, I.I. and Booth, C.A. (2015), "Experimental insights of using waste marble fines to modify the geotechnical properties of a lateritic soil", J. Environ. Eng. Landscape Manage., 23(2), 121-128.   DOI
38 Alsharef, J.M.A., Taha, M.R., Firoozi, A.A. and Govindasamy, P. (2016), "Potential of using nanocarbons to stabilize weak soils", Appl. Environ. Soil Sci., 1-9.
39 Anggraini, V., Asadi, A., Huat, B.B.K. and Nahazanan, H. (2015), "Effects of coir fibers on tensile and compressive strength of lime treated soft soil", Measurement, 59, 372-381.   DOI
40 ASTM D2166 / D2166M-16 (2016), Standard Test Method for Unconfined Compressive Strength of Cohesive Soil, ASTM International, West Conshohocken, Pennsylvania, U.S.A.