• 플랜트 저널
• /
• 제6권2호
• /
• pp.70-77
• /
• 2010

This study investigated the characteristics of co-combustion of mixed anthracite (domestic and Vietnam) and bituminous coal (Sonoma, Australia) at circulating fluidized bed boiler in Donghae thermal power plant when mixing ratio of bituminous coal is variable. Co-combustion of bituminous coal contributes to improvement in general combustion characteristics such as moderately retaining temperature of furnace and recycle loop, reducing unburned carbon powder, and reducing discharge concentration of NOx and limestone supply owing to improvement in anthracite combustibility as the mixing ratio was increased. However, bed materials were needed to be added externally when the mixing ratio exceeded 40% because of reduction in generating bed materials based on reduction in ash production. When co-combustion was conducted in the section of 40 to 60% in the mixing ratio while the supplied particles of bituminous coal was increased from 6 mm to 10 mm, continuous operation was shown to be possible with upper differential pressure of 100 mmH2O (0.98 kPa) and more without addition of bed materials for the co-combustion of mixed anthracite and bituminous coal (to 50% or less of the ratio) and that of domestic coal and bituminous coal (to 60% of the ratio).

• 한국토양비료학회지
• /
• 제47권1호
• /
• pp.66-70
• /
• 2014

Bed-soils can be used to help plants to overcome unfavorable conditions of soils, especially hydraulic properties of soils. This study was conducted to evaluate the effect of organic and inorganic raw materials on saturated hydraulic conductivity ($K_s$) of bed-soils. Perlite and bottom ash, which are inorganic materials, increased more $K_s$ of bed-soils than coco peat, an organic material. However, vermiculite, an inorganic material, increased less than coco peat. Saturated hydraulic conductivity of bed-soil mixed with fine vermiculite ($0.14{\pm}0.02mh^{-1}$) was much lower than one containing coarse vermiculite ($0.85{\pm}0.21mh^{-1}$). Such effect was more apparent when pressure was added on bed-soils containing fine vermiculite ($0.07{\pm}0.01mh^{-1}$), probably reflecting the decrease in pore size with the expansion of vermiculite wetted. Compacting decreased more $K_s$ in the bed-soils containing coco peat or vermiculite than other mixtures. Those results suggest that perlite and bottom ash in bed-soils play an important role in improving saturated hydraulic conductivity but vermiculite in bed-soils may suppress the improvement of saturated hydraulic conductivity with the decrease of its size and with the increase of compacting pressure.

• 한국환경과학회지
• /
• 제18권6호
• /
• pp.595-601
• /
• 2009

The effects of the cation-to-anion resin ratio and bed depth on ion exchange performance of mixed-bed were studied at ultralow solution concentration. Breakthrough curves were experimentally obtained for NaCI solution as functions of resin ratio and bed depth. The bed depth affects the pattern of the sodium breakthrough curve but not the chloride breakthrough curve in beds because of the selectivity difference. Resin selectivity determines the shape of breakthrough curves, Some sodium and chloride breakthrough curves crossed at a point as a function of resin ratio. The lower cation-to-anion resin ratio showed the higher effluent concentration or treated volume of the crossover point regardless of the total resin weight.

• 한국환경보건학회지
• /
• 제19권4호
• /
• pp.38-43
• /
• 1993

The characteristics of food wastewater treatment in an anaerobic packed bed reactor (APBR) with polyurethane as a packing material and sludge bed reactor (ASBR) was studied. The reactor of 9cm-ID, 150cm-height was fed in a continuous mode from bottom of reactor. For the purpose of constant temperature of reactor, water jacket was installed. The used packing materials was polyurethane sponge foam. Methane which was produced by decomposed organics collected at the top of the reactor for using as a fuel. The substrates used were synthetic, mixed and food wastewater. For the acclimatization of microorganisms, mixed wastewater was used. The major analyses were gas production, COD, pH and volatile acids. Based upon the completed works, the results are as follows: When food wastewater was fed the quantity of produced gas was less than that of synthetic wastewater, but food process saw higher methane content than synthetic process. As well as COD removal efficiency of food process reached at about 85%. In aspect of effluent volatile acid, food process showed low concentration of below 500 mg/l, therefore anaerobic reaction stabled. Conclusively food wastewater used can be digested by anaerobic treatment, especially anaerobic packed bed reactor showed 82% of COD removal, 75% of methane content, 10 l of gas production, and anaerobic sludge bed reactor did 79% of COD removal, 75% of methane content, 81 of gas production at 4 kgCOD/m$^3$day, 36$\circ$C.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.597-601
• /
• 2001

Waste plastics amount is more than 3.5 million tons and 30% of industrial waste in 1998, Korea but recycling rate of industrial waste plastics is quite low because the material separation technology from the mixed waste plastic powders is not commercially available so far. This study covers the triboelectrostatic separation of polyvinylchloride (PVC) materials collection chambers and controllers. PVC and PET powders can be imparted negative and positive surface charges, respectively, due to the difference of triboelectric charging series between particles and particles in the fluidized bed tribocharger, and can be separated by passing them through an external electric field. The extract content and yield of PVC separation from the mixed PVC and PET plastic powders are 90.0% and 98.2%, respectively. The electrostatic separation system using the fluidized bed tribocharger shows the potential to be an effective method for removing PVC materials from other mixed plastics.

• 한국분무공학회지
• /
• 제7권2호
• /
• pp.7-15
• /
• 2002

A particle flow visualization, electrostatic charging measurement and separation of triboelectrically charged particles in the external electric field by a fluidized bed tribocharger are conducted for the removal of PVC particles from mixed waste plastics. The laboratory-scale triboelectrostatic separation system consists of the fluidized bed tribocharger, a separation chamber, a collection chamber and a controller. PVC and PET particles can be imparted negative and positive surface charges respectively due to the difference of triboelectric charging series between particles and particles in the fluidized bed tribocharger, and can be separated by passing them through an external electric field. To visualize these charged particles, He-Ne laser is used with cylindrical lenses to generate a sheet beam. In the charging measurement, the particle motion analysis system (PMAS), capable of determining particle velocity and diameter. is used to non-intrusively measure particle behavior in high strength electric field. The average charge-to-mass ratios of PVC and PET particles are $1.4\;and\;1.2{\mu}C/kg$, respectively. The highly concentrated PVC (91.9%) can be recovered with a yield of about 96.1% from the mixture of PVC and PET materials for a single-stage processing. The triboelectrostatic separation system using the fluidized tribocharger shows the potential to be an effective method for removing PVC from mixed plastics for waste plastic recycling.

• 한국수자원학회논문집
• /
• 제37권5호
• /
• pp.387-395
• /
• 2004

본 논문에서는 하상변동 및 유사입자의 시간적 공간적 분포를 동시에 모의할 수 있는 2차원 수치모형을 제시하였다. 사행수로의 하상변동은 만곡부의 외측에서는 하상이 세굴되고 훨씬 더 거친 입경의 재료로 구성되며, 만곡부의 내측에서는 하상이 상승하고, 세립토로 구성되었다. 또한 사행하천에서 흐름의 방향에 대한 입자분포 과정은 상류의 변곡점에서 시작하여, 하류 변곡점에서 마치게 되는 것을 보여주었다. 하천의 경계가 불규칙하고 복잡한 하천에서는 혼합사호 형성된 하천에서보다 균일사로 이루어진 하천에서 하상이 깊게 세굴되는 현상을 보여준다. 혼합사로 이루어진 하천에서의 공간적 입도 분포는 사행하천에서와 마찬가지로 하상이 퇴적되는 사행의 내측에서는 세립토로 구성되고 하상이 세굴되는 외측에서는 굵은 입자로 구성되는 것을 보여주었으며, 하천 폭이 좁은 부분에서는 하상의 세출 및 하상재료가 굵게 변화되는 것을 보여주었다.

• 한국수자원학회논문집
• /
• 제42권10호
• /
• pp.845-855
• /
• 2009

본 연구에서는 대청댐 하류 구간에서 증가방류에 의한 유사의 이송 및 하상토의 변화 특성을 분석하였다. 증가방류에 의해 하상토의 평균입경은 증가하고, 표준편차는 작아지며, 입경분포는 균등하게 변하였다. 혼합사로 구성된 하상토의 표층은 굵은 자갈로 형성되었고, 저층은 모래로 구성되었으며, 유사의 수직분급이 발생하였다. 유사의 거동은 소류사 형태로 이동하였다. 혼합사의 거동을 파악하기 위해서 유사 채집상자에 포착된 유사의 통과중량 백분율에 대한 상대입경비(D$_i$/D$_{50}$)를 분석한 결과, 현도지점에서 상대입경비는 D$_{50}$ 보다 큰 경우에 약 1.0으로 거의 일정하게 유지되고 있으며, 부강 지점에서 상대입경비는 증가방류 전과 후의 중간에 있었다. 현도수위표에서 하상토의 입경에 대하여 개별입자에 대한 작용력과 저항력의 비($\tau_i^*$)는 D$_{50}$ 보다 큰 경우에 일정하게 유지되었으며, 부강수위표에서는 크게 감소하였다. 이것은 댐 직하류에서 장갑화 현상이 부강수위표보다 크게 되었다는 것을 의미하며, 증가방류에 의해 입경이 균일하게 이송하는 것을 알 수 있다.

• Journal of Mechanical Science and Technology
• /
• 제16권10호
• /
• pp.1336-1345
• /
• 2002

A triboelectrostatic separation system using a fluidized bed tribocharger for the removal of PVC material in the mixture of PVC/PS plastics is designed and evaluated as a function of electric field strength, air flow rate, and the mixing ratio of two-component mixed plastics. It consists of a fluidized-bed tribocharger, a separation chamber, a collection chamber and a controller. PVC and PS particles can be imparted negative and positive surface charges, respectively, due to the difference in the work function values of plastics suspended in the fluidized-bed tribocharger, and can be separated by passing them through an external electric field. Experimental results show that separation efficiency is strongly dependent on the electric Deld strength and particle mixing ratio. In the optimum conditions of 150 Ipm air flow rate and 2.6 kV/cm electric field strength a highly concentrated PVC (99.1%) can be recovered with a yield of more than 99.2% from the mixture of PVC and PS materials for a single stage of processing.

• 한국환경보건학회지
• /
• 제33권6호
• /
• pp.488-492
• /
• 2007

The influence of additive materials including saw dust and cow manure in the ripening of leather sludge for the efficient vermisabilization was studied. The ripening characteristics of the leather sludge, the growth of earthworms in the growth bed and the by-products like cast were observed according to the mixing ratio of additive materials. When the mixed leather sludge of which the additive materials contents were over 20% were ripened for 50 days, the values of ORP and alkalinity were changed to the favorable ranges for earthworms, the positive (+) and below 1,000 mg/l as $CaCO_3$, respectively. The velocity of ripening improving the characteristics of the leather sludge was faster in the sludge mixed with cow manure than saw dust. This results could also be verified from the monitoring of the states of earthworm growth using the survival rate, the increase rate of lifeweight and the hatching rate of earthworm cocoon in the their growth bed packed with the ripened sludge. The values of CEC in cast, the vermi-stabilized sludge, were increased with the mixing ratio of additive materials, but the content of heavy metals was drcreased by the dilution effect and accumulation in the earthworm body. Above results show that the leather sludge might be efficiently stabilized by earthworms through the ripening for 50 days using additive materials. Cow manure can be used as a good additive materials for leather sludge as much as saw dust, and the optimum content of additive materials in the well-ripened leather sludge was about 30%.