• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.4
• /
• pp.296-304
• /
• 2022

To maximize the medicinal properties of bellflower root (Platycodi radix), its growth and development according to soil texture were investigated using four types of soil: masato (decomposed granite), soil mix, loamy sand, and sandy loam. Saponin content was measured. With regard to bellflower root growth depending on soil texture, its growth was better in the order of loamy sand > sandy loam > soil mix > masato in the above-ground part, and loamy sand > soil mix > sandy loam > masato in the underground part in the order. The average content of general ingredients were 77.3% water, 2.6% crude fat, 3.2% crude flour, 6.0% crude protein, and 10.9% carbohydrates. With respect to saponin analysis of bellflower roots, the saponin content regarding platycodin D, platycodin D3, polygalacin D, and deapioplatycodin D were higher in the order of 282.4, 104.7, 29.1, 19.1 mg/100 g, respectively. The content of organic matter and phosphoric acid was high in soil mix and sandy loam, and platycodin D3 showed similar levels in all soil types. As a result, the soil mix is considered most suitable in terms of yield and component levels, however, it is the most expensive type. As a replacement, sandy loam was adequate in terms of fresh weight related to yield and highest saponin content.

• Animal Bioscience
• /
• v.36 no.5
• /
• pp.720-730
• /
• 2023

Objective: This study investigated the effects of corn silage as a source of microbial inoculant containing antifungal and carboxylesterase-producing bacteria on fermentation, aerobic stability, and nutrient digestibility of fermented total mixed ration (FTMR) with different energy levels. Methods: Corn silage was used as a bacterial source by ensiling for 72 d with an inoculant mixture of Lactobacillus brevis 5M2 and L. buchneri 6M1 at a 1:1 ratio. The corn silage without or with inoculant (CON vs MIX) was mixed with the other ingredients to formulate for low and high energy diets (LOW vs HIGH) for Hanwoo steers. All diets were ensiled into 20 L mini silo (5 kg) for 40 d in quadruplicate. Results: The MIX diets had lower (p<0.05) acid detergent fiber with higher (p<0.05) in vitro digestibilities of dry matter and neutral detergent fiber compared to the CON diets. In terms of fermentation characteristics, the MIX diets had higher (p<0.05) acetate than the CON diets. The MIX diets had extended (p<0.05) lactic acid bacteria growth at 4 to 7 d of aerobic exposure and showed lower (p<0.05) yeast growth at 7 d of aerobic exposure than the CON diets. In terms of rumen fermentation, the MIX diets had higher (p<0.05) total fermentable fraction and total volatile fatty acid, with lower (p<0.05) pH than those of CON diets. The interaction (p = 0.036) between inoculant and diet level was only found in the immediately fermentable fraction, which inoculant was only effective on LOW diets. Conclusion: Application of corn silage with inoculant on FTMR presented an antifungal effect by inhibiting yeast at aerobic exposure and a carboxylesterase effect by improving nutrient digestibility. It also indicated that fermented feedstuffs could be used as microbial source for FTMR. Generally, the interaction between inoculant and diet level had less effect on this FTMR study.

• Structural Engineering and Mechanics
• /
• v.32 no.5
• /
• pp.685-699
• /
• 2009

Current research and development of high performance concrete, together with study of phenomena that are pertinent to impact resistance, have lead to a new generation of barriers with improved properties to resist impact loads. The paper reviews major properties and mechanisms that affect impact resistance of concrete barriers as per criteria that characterize the resistance. These criteria are the perforation limit, penetration depth and the amount of front and rear face damage. From the long-known, single strength parameter that used to represent the barriers' impact resistance, more of the concrete mix ingredients are now considered to be effective in determining it. It is shown that the size and hardness of the aggregates, use of steel fibers and micro-silica have different effects on performance under impact and on the resistance. Additional pertinent phenomena, such as the rate and size effects, confinement and local versus global response, are pointed out with their reference to possible future developments in the design of impact resisting concrete barriers.

• Food Science of Animal Resources
• /
• v.21 no.1
• /
• pp.18-23
• /
• 2001

A total of 100 adults were surveyed on types of favorable meat products. They tended to show much of unsatisfactory on the market products. Those unsatisfactory were mostly conceptual such as instant products, unreliable raw materials, sanitation conditions, list of unfavorable ingredients, mix of harmful additives, and etc. The results indicated that the consumers purchased the products of ham, cheese, chicken, sausages, and canned products mostly at medium-large marts(56%), department stores(22%), retail stores(19%) and others(3%). They were also concerned with the distribution date, prices, shape of packaging, and etc. The types of products and frequencies of purchasing various products were varied by time. For the purchase of products, mixed items were more favored rather than the single items.

• Computers and Concrete
• /
• v.10 no.1
• /
• pp.49-57
• /
• 2012

Nano-particle-reinforced cement mortars have been the basis of research in recent years and a significant growth is expected in the future. Therefore, optimization and quantification of the effect of processing parameters and mixture ingredients on the performance of cement mortars are quite important. In this work, the effects of nano-silica, water/binder ratio, sand/binder ratio and aging (curing) time on the compressive strength of cement mortars were modeled by means of artificial neural network (ANN). The developed model can be conveniently used as a rough estimate at the stage of mix design in order to produce high quality and economical cement mortars.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.9
• /
• pp.1444-1452
• /
• 2007

An in vitro experiment was conducted to evaluate the differences in microbial activity of five faecal inocula from weaned pigs and one faecal inoculum from unweaned pigs in combination with 6 substrates. The substrates tested were negative control diet, corn, soybean meal, oligofructose (OF), ground chicory roots and a mixture (60% chicory pulp and 40% OF). The inocula used were derived from pigs fed either a corn-soy based diet without antibiotics (NCON), the NCON diet supplemented with oligofructose (OF), a mixture of chicory pulp (40%) and OF (60%) (MIX), ground chicory roots (CHR) or the NCON diet supplemented with antibiotics (PCON). The cumulative gas production measured fermentation kinetics and end products, such as total gas production, ammonia and volatile fatty acids, were also determined. Both the substrate and the inoculum significantly affected the fermentation characteristics. The cumulative gas production curve showed that different substrates caused more differences in traits of fermentation kinetics than the different inocula. Inocula of weaned pigs gave a significantly higher VFA production compared to the inoculum from unweaned animals, whilst the rate of fermentation and the total gas produced did not differ. OF showed the highest fermentation kinetics and the lowest $NH_3$, pH and OM loss compared to other substrates. It was concluded that the microbial activity was significantly affected by substrate and inoculum. Inoculum from weaned pigs had more potential for microbial fermentation of the carbohydrate ingredients and oligofructose than that of unweaned pigs. A combination of high and low polymer inulin may be more beneficial to the gut ecosystem than using high- or low-polymer inulin alone.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.759-766
• /
• 1998

It was determined whether thermoluminescence (TL) technique is a potential method to detect post-irradiation of dry soup base mix for instant noodle and its ingredients. The ingredients or the mixtures were irradiated, from which minerals were isolated using sodium polytungstate solution. Their TL signals (1st glow TL intensity/2nd glow TL intensity reirradiated at 48.6 Gy) were measured. The TL signals in temperature ranges of $229{\sim}295^{\circ}C$ and $229{\sim}361^{\circ}C$ showed larger differences between unirradiated and irradiated samples compared to other ranges. The average TL signals for unirradiated garlic powder, ginger powder, black pepper powder, onion powder, red pepper powder, and sesame seeds were below 0.2, while those for onion powder, red pepper powder, and sesame seeds irradiated at 10 kGy were over 20 in the two temperature ranges. The average TL signals for unirradiated soup mixture were 0.08 and 0.1, respectively, in the two temperature ranges, while those for the mixtures containing 10 kGy-irradiated onion powder, red pepper powder, and sesame seeds individually or in combination were over 7. The average TL signals for the mixtures irradiated 1, 5, and 10 kGy were over 10.

• Food Science of Animal Resources
• /
• v.38 no.1
• /
• pp.26-42
• /
• 2018

Today incorporation of natural ingredients as inorganic phosphate replacers has come into prominence as a novel research topic due to health concerns about phosphates. In this study, we aimed to investigate the quality of emulsified chicken meatballs produced with Jerusalem artichoke powder (JAP), either alone or in combination with sodium carbonate (SC) as sodium tripolyphosphate (STPP) replacers. The results showed that naturally dried JAP showed favorable technological properties in terms of water-oil binding and gelling. Emulsion batters formulated with JAP-SC mixture showed lower jelly and fat separation, higher water-holding capacity and higher emulsion stability than control samples with STPP. In final product, incorporation of JAP-SC mixture increased moisture and reduced lipid and energy values, and kept the pH value similar to control. Added JAP lead to increments in $b^*$ values whereas decreases $L^*$ values. Cook yield was similar to control in phosphate-free samples formulated with JAP-SC mix. Either low or medium ratios of JAP in combination with SC managed to protect most of the sensory parameters, while sensory scores tend to decrease in samples containing high levels of JAP. Addition of JAP to formulations presented samples that have equivalent behavior to phosphates in terms of lipid oxidation. In conclusion, our study confirms that utilization of JAP in combination with SC had promising effects as phosphate replacers by presenting natural solutions and providing equivalent quality to standard phosphate containing products.

• Preventive Nutrition and Food Science
• /
• v.8 no.3
• /
• pp.278-283
• /
• 2003

Textural properties of tofu manufactured with micronized full-fat soyflour (MFS) were enhanced by the addition of soy protein isolate, whey protein concentrate, chitosan oligosaccharide and mushroom powder. The MFS solution (14.2% solid content) was converted to semi-solid tofu by a two-stage heat treatment with the addition of 4% coagulant mix. The MFS tofu was evaluated by a compression test as well as sensory evaluation. To produce the semi-solid gel (MFS tofu) with reasonably high strength and toughness, the MFS solution with 14.2% solid content and 7.0% protein had to be heat treated at 121$^{\circ}C$ for 3min. The relative toughness of MFS tofu was increased by the addition of SPI, showing a 144% increase. The toughness of MFS tofu prepared with the MFS/SPI mixture was greatly increased by the addition of WPC at the level of 0.7% and the water separation from MFS tofu was greatly reduced. Furthermore, the toughness and strength of MFS/SPI tofu was enhanced by the addition of 0.1% chitosan oligosaccharide and 0.2% mushroom powder. The sensory evaluation of the tofu fortified with SPI, chitosan oligosaccharide and mushroom powder was superior to that of MFS tofu, with a higher score for overall preference.

• Advances in concrete construction
• /
• v.9 no.2
• /
• pp.173-181
• /
• 2020

Fracture properties of concrete depend on the mix proportions of the ingredients, specimen shape and size, type of testing method used for the evaluation of fracture properties. Aggregates play a key role for changes in the fracture behaviour of concrete as they constitute about 60-75 % of the total volume of the concrete. The present study deals with the effect of size and quantity of coarse aggregate on the fracture behaviour of steel fibre reinforced self compacting concrete (SFRSCC). Lower coarse aggregate and higher fine aggregate content in SCC results in the stronger interfacial transition zone and a weaker stiffness of concrete compared to vibrated concrete. As the fracture properties depend on the aggregates quantity and size particularly in SCC, three nominal sizes (20 mm, 16 mm and 12.5 mm) and three coarse to fine aggregate proportions (50-50, 45-55, 40-60) were chosen as parameters. Wedge Split Test (WST), a stable test method was adopted to arrive the requisite properties. Specimens without and with guide notch were investigated. The results are indicative of increase in fracture energy with increase in coarse aggregate size and quantity. The splitting force was maximum for specimens with 12.5 mm size which is associated with a brittle failure in the pre-ultimate stage followed by a ductile failure due to the presence of steel fibres in the post-peak stage.