• 한국물환경학회지
• /
• 제32권3호
• /
• pp.243-252
• /
• 2016

In cases of water pollution accidents, accurate prediction for arrival time and concentration of contaminants in a river is essential to take proper measures and minimize their impact on downstream water intake facilities. It is critical to fully understand the behavior characteristics of contaminants on river surface, especially in case of oil spill accidents. Therefore, in this study, the effects of main parameters of advection and diffusion of contaminants were analyzed and validated by comparing the results of Lagrangian particle tracking (LPT) simulation of Environmental Fluid Dynamic Code (EFDC) model with those of Global Position System (GPS)-equipped drifter experiment. Prevention scenario modeling was accomplished by taking cases of movable weir operation into account. The simulated water level and flow velocity fluctuations agreed well with observations. There was no significant difference in the speed of surface particle movement between 5 and 10 layer modeling. Therefore, 5 layer modeling could be chosen to reduce computational time. It was found that full three dimensional modeling simulated wind effects on surface particle movements more sensitively than depth-averaged two dimensional modeling. The diffusion range of particles was linearly proportional to horizontal diffusivity by sensitivity analysis. Horizontal diffusivity estimated from the results of GPS-equipped drifter experiment was 0.096 m²/sec, which was considered to be valid for applying the LPT module in this area. Finally, the scenario analysis results showed that particle movements could be stagnant when discharge from the upstream weir was reduced, implying the possibility of securing time for mitigation actions such as oil boom installation and wiping oil contaminants. The outcomes of this study can help improve the prediction accuracy of particle tracking simulation to establish the most suitable mitigation plan considering the combination of movable weir operation.

• 한국환경복원기술학회지
• /
• 제17권4호
• /
• pp.17-27
• /
• 2014

Wind power which is one of renewable energies is higher economical efficiency and technical maturity than other renewable energies. Recently, the government of ROK announced to increase the proportion of renewable energy through the National Energy Plan. Also, industry required to deregulate for large-scale wind power as Renewable Portfolio Standard (RPS) is introduced. Wind power whereas the eco-friendly energy, is a serious level of damage of the natural environment and topography when the wind power is located. Therefore, the study selected the indicators required for site selection of wind power and proposed the feasible area for wind power based on wind resource map. We selected the 15 indicators including 12 legal protected area, Ecology and Nature Map, rarity, and connectivity (National Ecological Network). After site selection, we should be considered slope and altitude at the stage of design for wind farm to mitigate the environmental impact. Results of analysis showed that 22.3% of wind resource map is available to locate wind power in real. Through the field survey we had verified the accuracy of the results was significantly correct.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권1호
• /
• pp.98-103
• /
• 2009

The forecasting, mitigation and preparedness of the natural disaster impacts require relevant information regarding the disaster desirable in real time. In the meantime it is requiring the rapid and continuous data and information generation or gathering for possible prediction and monitoring of the natural disaster. Since disasters that cause huge social and economic disruptions normally affect large areas or territories and are linked to global change. The use of traditional and conventional methods for management of the natural disaster impact can not be effectively implemented for intial data col1ection with the further processing. The space technology or remote sensing tools offer excellent possibilities of collecting vital data. The main reason is capability of this technology of collecting data at global and regional scales rapidly and repetitively. This is unchallenged advantage of the space methods and technology. The satellite or remote sensing techniques can be used to monitor the current situation, the situation before based on the data in sight. as well as after disaster occurred. They can be used to provide baseline data against which future changes can be compared while the GIS techniques provide a suitable framework for integrating and analyzing the many types of data sources required for disaster monitoring. Developed GIS is an excellent instrument for definition of the social impact status of the natural disaster which can be undertaken in the future database developments. This methodology is a good source for analysis and dynamic change studies of the natural disaster impacts.

• 한국농공학회논문집
• /
• 제60권6호
• /
• pp.121-131
• /
• 2018

Climate change has caused changes in environmental factors that have a direct impact on agriculture such as temperature and precipitation. The meteorological disaster that has the greatest impact on agriculture is drought, and its forecasts are closely related to agricultural production and water supply. In the case of terrestrial data, the accuracy of the spatial map obtained by interpolating the each point data is lowered because it is based on the point observation. Therefore, acquisition of various meteorological data through satellite imagery can complement this terrestrial based drought monitoring. In this study, Evaporative Stress Index (ESI) was used as satellite data for drought determination. The ESI was developed by NASA and USDA, and is calculated through thermal observations of GOES satellites, MODIS, Landsat 5, 7 and 8. We will identify the difference between ESI and other satellite-based drought assessment indices (Vegetation Health Index, VHI, Leaf Area Index, LAI, Enhanced Vegetation Index, EVI), and use it to analyze the drought in South Korea, and examines the applicability of ESI as a new indicator of agricultural drought monitoring.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권8호
• /
• pp.1207-1213
• /
• 2016

Heat stress negatively affects milk quality altering its nutritive value and cheese making properties. This study aimed at assessing the impact of seasonal microclimatic conditions on milk quality of Friesian cows. The study was carried out in a dairy farm from June 2013 to May 2014 at Beni-Suef province, Egypt. Inside the barn daily ambient temperature and relative humidity were recorded and used to calculate the daily maximum temperature-humidity index (mxTHI), which was used as indicator of the degree of heat stress. The study was carried out in three periods according to the temperature-humidity index (THI) recorded: from June 2013 to September 2013 (mxTHI>78), from October 2013 to November 2013 (mxTHI 72-78) and from December 2013 to April 2014 (mxTHI<72). Eighty Friesian lactating dairy cows were monitored in each period. The three groups of cows were balanced for days in milk and parity. Milk quality data referred to somatic cell count, total coliform count (TCC), faecal coliform count (FCC), Escherichia coli count, percentage of E. coli, and Staphylococcus aureus, percentage of fat, protein, lactose, total solid and solid non-fat. Increasing THI was associated with a significant decrease in all milk main components. An increase of TCC, FCC, and E. coli count from mxTHI<72 to mxTHI>78 was observed. In addition, the isolation rate of both S. aureus and E. coli increased when the mxTHI increased. The results of this study show the seriousness of the negative effects of hot conditions on milk composition and mammary gland pathogens. These facts warrant the importance of adopting mitigation strategies to alleviate negative consequences of heat stress in dairy cows and for limiting related economic losses.

• 한국환경복원기술학회지
• /
• 제21권2호
• /
• pp.77-85
• /
• 2018

The intensive habitats loss of natural organisms as a consequence of anthropogenic activities has lead to the use of alternative habitats for species conservation. We reviewed the current status of alternative habitats and suggest the improvement of alternative habitats. Most of alternative habitats regarded in this study are not following the pre-arranged consultation at environmental impact assessment. These alternative habitats are rendered useless due to the insufficient consideration of ecological characteristics of species and lack of detailed plans. A number of alternative habitats are influenced by disturbance such as environmental pollution and construction. Post-monitoring of alternative habitats are needed to estimate immigration rate of species. Post management is also needed to assess the status of population stability. Overall, low effectiveness of alternative habitats is presented in this study. According to the status survey, methods for improvement of alternative habitats are required such as detailed guidelines, establishment of post-monitoring system, improvement of habitat restoration techniques, and guidelines for management and operation of alternative habitats.

• Journal of Construction Engineering and Project Management
• /
• 제2권4호
• /
• pp.20-24
• /
• 2012

Construction while being an economic activity that provides facilities and infrastructure, it is beneficial to man in some aspects and detrimental in others. There have been environmental concerns related to construction activities globally which mainly focus on atmospheric emissions, depletion of natural resources and energy issues. This study was carried out to assess the impacts of construction activities on the environment in Iganga Municipality and to propose measures for their mitigation. The methodology included: review of relevant literature, observations of the general environmental effects of construction activities, focus groups and a survey conducted among construction industry role players to determine their perceptions and opinions regarding environmental impact of construction activities. The collected data was presented in tabular form and analysed by description of responses to questions. The study revealed that forests were the most greatly degraded due to high demand of timber for construction followed by wetlands degradation. The findings of this study will be useful to architects, designers and builders in order to carefully design buildings and other infrastructure that are environmentally friendly and sustainable. Construction materials and their mode of acquisition are harmful threats to the environment. There is need to reduce the consumption of these materials through recycling and reusing wastes to reduce on waste generation, use of virgin materials and the subsequent waste of energy used in new material production.

• 환경영향평가
• /
• 제20권5호
• /
• pp.585-600
• /
• 2011

South Korean central government has launched the first comprehensive climate change policies in 1999, and they have been renewed every three year. The third policies ended in 2007. However, it is quite rare to analyze whether the climate change policies are effective against climate change. In this context, this paper aims at analyzing the effectiveness of climate change policy which was launched for seven years from 1999 to 2007 in South Korea. The effectiveness analysis of policy can be done in terms of the individual policy and/or all policies being synthesized as a comprehensive unit. Employing the latter methodology, this paper analyzed the effectiveness on the basis of economic growth as independent variable, greenhouse gas emission as dependent variable, and energy use and its process as intervening variable. Seven analytic indicators covering the three variables were selected on the basis of two points in time before and after climate change policy having been launched. The seven indicators were analyzed in terms of three aspects. They were the change in the state of each indicator, the effectiveness of climate change policy from 1999 to 2007, and the effectiveness process from 1999 to 2007. The effectiveness process was analyzed in terms of the relational context and its flow processing path. Economic growth was advanced remarkably with increase in the total consumption of energy. As a result, greenhouse gas emission increased. However, energy efficiency increased with significant decrease in energy intensity, carbon intensity, and energy elasticity. The expansion of new and renewable energy over total energy supply was not effective significantly on the decrease in greenhouse gas emission. The processing path of climate change policy being effective advanced toward increase in energy efficiency through energy intensity rather than toward sustainable development. Such a way of the effectiveness of climate change policy implies that most policies focused on adaptation rather than on mitigation.

• 한국농공학회논문집
• /
• 제57권1호
• /
• pp.25-35
• /
• 2015

As livestock manure treatment is becoming a problem, manure application in forest plantation is recommended as an alternative. In this study, to investigate the impact due to liquid manure application in forest plantation, soil, soil water and shallow groundwater quality had been monitored in poplar experimental site where the liquid manure (LM) was applied. Water samples were collected weekly during growing season (April to October) from 2008 to 2011. From the monitoring results, phosphorus concentration in the soil and soil water had no significant difference between LM and control plots. $NO_3$-N concentration of soil water in LM, however, showed higher concentration (13.6 mg/l at 40 cm, 35.1 mg/l at 80 cm) than control plot (1.5 mg/l at 40 cm, 0.5 mg/l at 80 cm). In case of shallow groundwater quality, pH, heavy metal, etc. were satisfied to the national agricultural water quality standard of groundwater and there were no significant difference between upstream and downstream. The $NO_3$-N concentration of shallow groundwater was also not exceeded the national drinking water standard. However, $NO_3$-N concentration in soil water and downstream of shallow groundwater had increased in 2011 when non-composted LM was applied mostly in non-growing season of tree (September). From the results, it is important to control nitrogen source, application time and decomposed or not when LM is applied. In addition, to investigate nitrate source, further long-term monitoring and modelling could be necessary.

• Journal of Advanced Research in Ocean Engineering
• /
• 제2권4호
• /
• pp.158-168
• /
• 2016

During the installation of crude oil or gas pipelines, which pass through onshore buried pipelines or onshore pipeline from subsea pipeline to onshore plant, countermeasures need to be implemented so as to ensure a sufficient design life by protecting the steel pipes against corrosion. This can be achieved through impressed current cathodic protection method for onshore pipelines and through galvanic sacrificial anode corrosion protection method for offshore pipelines. In particular, in the case of impressed current cathodic protection, isolation joint flanges should be used. However, this makes maintenance control difficult with its installation having a negative impact on price. Therefore, in this study, the most suitable methodology for onshore pipeline protection between galvanic sacrificial anode corrosion protection and impressed current cathodic protection method will be introduced. In oil and gas transportation facilities, the media can be carried to the end users via onshore buried and/or offshore pipeline. It is imperative for the field operators, pipeline engineers, and designers to be corrosion conscious as the pipelines would undergo material degradations due to corrosion. The mitigation can be achieved with the introduction of an impressed current cathodic protection method for onshore buried pipelines and a galvanic sacrificial anode corrosion protection method for offshore pipelines. In the case of impressed current cathodic protection, isolation joint flanges should be used to discontinuity. However, this makes maintenance control to be difficult when its installation has a negative impact on the price. In this study, the most suitable corrosion protection technique between galvanic sacrificial anode corrosion protection and impressed current cathodic protection is introduced for (economic life of) onshore buried pipeline.