• 환경영향평가
• /
• 제33권2호
• /
• pp.64-73
• /
• 2024

개발사업으로 인한 서식지 파괴의 심각성이 대두되면서 생물다양성을 보전하기 위해 환경영향평가(EIA)의 중요성은 커지고 있다. 경관스케일에서 개발 요인과 주변 환경요인에 따른 생물다양성 영향을 정량적으로 평가하기 위해 선행연구들이 진행되고 있으나, 개발사업을 기준으로 생물다양성 감소에 영향을 미치는 요인에 대한 연구는 미흡한 실정이다. 본 연구는 선행연구를 통해 유효하다고 밝혀진 독립변수(사업 면적, 사업 유형, 고도, 생태·자연도, 녹지와의 이격거리, 보호구역과의 이격거리)들을 다중클래스 로지스틱 회귀분석, T-test, 사업 유형 검토분석을 통해 종풍부도 변화에 유의미한 영향을 미치는지를 검토하였다. 연구 결과, 토지 피복 단위에서 생물다양성에 영향을 끼치는 것으로 밝혀진 요인 중 사업 규모와 환경영향평가 시 종풍부도 값만이 p-value=0.05 이하의 값을 보였다. 그리고 사업 유형의 경우, 체육시설의 설치, 에너지 개발, 산업입지 및 산업단지의 조성에서 조류의 생물다양성 감소가 크게 변화하는 것을 확인하였다. 본 연구를 통해 분석 규모에 따라 영향을 끼치는 변수에서의 차이가 발생할 수 있음을 확인하였기에, 환경영향평가에서 생물다양성 변화를 분석하기 위해서는 개발사업 단위에서의 지표 활용에 연구가 추가로 필요할 것이며, 타 생물종으로의 일반화를 위해 추가적인 연구가 필요할 것으로 사료된다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.624-627
• /
• 2007

There are many channel confluences existing in natural river systems, where the hydraulics are very complex because of the interactive between tributary and main river The RMA-2 model Is applied in this paper to model the confluence between Uksu Chun subriver and Nam Chun main river. Based on three types of assumed confluence forms, the model resuits present the hydraulics at channel confluence can be divided into several zones including a zone of separation immediately downstream of the junction branch channel, a maximum and minimum velocity region at upstream and downstream in the confluent channel, and a shear plane developed between the two combing flows at downstream of confluent channel. And the different types of confluent forms performs a very high effect on drainability of tributary, so it is very necessary to design a reasonable confluent forms.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.242-245
• /
• 2007

초고층건물의 주된 피난경로인 계단실에 발생하는 연돌효과는 계단실 차압분포에 큰 영향을 주고 피난에 장애가 될 수도 있으므로 적정 범위 내에서 억제되어야한다. 고층건물의 연돌효과를 해소하는 방법을 찾기 위해 몇 가지 경우에 대해 시뮬레이션을 하고 계단실 상하부의 fan으로 가압과 감압을 적절히 병용한 결과 연돌효과에 의한 차압불균형을 해소할 수 있었다.

• 무역상무연구
• /
• 제48권
• /
• pp.27-56
• /
• 2010

Pollution emissions from international shipping and port activities have a significant impact on public health and global climate changes. The purpose of this paper is to review the status of pollution mitigation measures implemented to date in port industry and find out some implications for Korean ports. For this aim, the clean air strategies of the world major ports including six USA ports (Los Angeles/Long Beach, Now York/New Jersey, and Seattle and Tacoma), two European ports (Rotterdam and Gothenburg) and Busan Port were considered. Various measures to reduce emission from ports are evaluated by sectors-ocean going vessels, cargo handling equipments, truck and rail-, on the basis of categories such as reduction control technologies, operational changes and market-based measures. The policy implications of this paper are as follows. First, Clean Air Act Plans of Korean ports are required as soon as possible. Second, integrated approach is required to reduce emission effectively. Finally, the effect of port-related emission reduction can be maximized when various measures are conducted on a regional basis including neighboring ports. Furthermore, regional or global-based approach is useful to guarantee the level playing field among ports.

• Ocean Systems Engineering
• /
• 제6권3호
• /
• pp.289-303
• /
• 2016

With more than 100 years exploration and development of offshore oil, more and more offshore oil fields will gradually lose the economic profit to operate. In this article, to take the target oil field for example, the procedure of decommissioning for FPSO, TCMS, subsea system and well abandonment have been analyzed. Meanwhile, the environment impact and mitigation measure have been proposed. The successful project experience will provide a guide line for the offshore facilities decommissioning and abandonment.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권2호
• /
• pp.58-63
• /
• 2012

The Test Signal Method is adopted to analyze the impact of thyristor controlled series capacitor (TCSC) on sub-synchronous oscillation. The results show that the simulation system takes the risk of Sub-synchronous Oscillation (SSO) while the TCSC is operating in the capacitive region. A supplementary excitation damping controller (SEDC) is used to mitigate SSO caused by the TCSC. A new optimization method which is aimed for optimal phase compensation is proposed. This method is realized by using the particle swarm optimization (PSO) algorithm. The simulation results show that the SEDC designed by this method has superior suitability, and that the secure operation scope of the TCSC is greatly increased.

• 전기학회논문지P
• /
• 제65권1호
• /
• pp.1-6
• /
• 2016

Recently, proportion of the induction motor load is gradually increased. When a contingency in the power systems, it has been discovered phenomenon that the voltage is delayed recover caused mechanical characteristics of the induction motor load. It can be a serious impact on the voltage stability of the power system considering induction motor load. The scheme to mitigate this phenomenon tripping off the motors to prevent voltage drop and delayed voltage recovery on the load demand side. Fault induced delayed voltage recovery phenomenon is caused by stalling of small induction motor load in transmission level contingencies. In this paper, fault induced delayed voltage recovery phenomenon mitigation method implementation under voltage load shedding on the korean power system considering induction motor load.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.545-550
• /
• 2007

The objective of this paper is to suggest a characteristics of Noise and the Noise Prediction Model and the appropriate Noise Impact Mitigation Method for a elevated railway bridges construction. The characteristics on noises are investigated and evaluated according to a type of railway bridges such as steel, concrete and steel/concrete compound bridges, a types of train, a distance and height from railways. The noise prediction study has been made by the evaluation of differences between model values and in-situ measurement, around the railways. For the noise prediction, the Mithra program and the electronic properties of noises have been adopted.

• 상하수도학회지
• /
• 제13권2호
• /
• pp.95-104
• /
• 1999

A simulation of water hammer, introduced by abruptly varied motion of a pumping machine, was performed at a one of typical pumping station in Korea. Impact of hydraulic structure such as check valve, pressure relief valve and air valve in mitigating water hammer effect was estimated gradually. Method of characteristic was employed for the effective calculation of discharge and head. The relationship between various hydraulic structures and flow was properly integrated on the base of the method of characteristic. The methodology in this approach can provide significant contribution in decision making procedure for the design of hydraulic structure at a typical pumping station in Korea.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 춘계학술발표논문집
• /
• pp.421-424
• /
• 2009

SCADA control systems and protocols are developed based on reliability, availability, and speed but with no or little attention paid to security. Specifically in Modbus protocol, there are inherent security vulnerabilities in their design. The lack of common security mechanisms in the protocol such as authentication, confidentiality and integrity must be addressed. In this paper, security vulnerabilities of Modbus-based SCADA controls systems will be studied. An in-depth analysis of the message frame formats being sent between master and slave will be discussed to expose the security vulnerabilities. This will enable SCADA users to find ways to fix the security flaws of the protocol and design mitigation strategies to reduce the impact of the possible attacks. Security mechanisms are recommended to further enhance the security of SCADA control systems.