• Journal of the Optical Society of Korea
• /
• v.5 no.4
• /
• pp.136-139
• /
• 2001

We investigated a high-output ower, periodically poled lithium niobate(PPLN) optical parametric oscillator(OPO) pumped by a Q-switched Nd:YAG laser. Given the low optical damage threshold and the limited aperture (0.5mm thick) of PPLN, we tried to maximize the signal output power in a linear cavity consisting of two flat mirrors with a loosely focused pump beam. It is found that this simple cavity structure allowed a robust OPO operation, which was not sensitive to alignment compared with the conventional ones using concave mirrors. A maximum energy of 100$\mu$J/pulse was achieved for the signal at 1.36${\mu}{\textrm}{m}$, while the oscillation threshold was 0.3 mJ/pulse for the pump at 1064 nm.

• Journal of The Korean Association For Science Education
• /
• v.32 no.6
• /
• pp.1027-1038
• /
• 2012

We investigated the effect of Science Writing Heuristic (SWH) on elementary students' concept formation and their retention. Also we explored the interaction effect of those with scientific attitudes. We developed mirrors/lenses lessons incorporating SWH. An experimental group of fifth grade students (n=25) had been instructed with SWH lessons for six periods while a control group (n=25) taught according to the normal science lessons based on the Korean national curriculum using teacher's guides published by the Ministry of Education. Results of pre- and post-test of understanding the concept of mirrors and lenses showed a positive impact of SWH on both male and female students. However, the retention effect after post-test revealed that SWH only had an effect on female students' scientific attitudes. SWH, therefore, could be an effective teaching approach especially on concept formation, retention effects by fostering female students' scientific attitudes.

• Korean Journal of Optics and Photonics
• /
• v.9 no.6
• /
• pp.373-379
• /
• 1998

A new method is proposed for the design of the dichroic mirrors in 3-LCD projection systems for color separation/composition. Rather than simply basing the color performance cirterion on luminance or chromatic saturation only, the optimum design parameters can be found by maximizing the volume of the perceived color gamut in RLAB color space and related color appearance model and used the linearly approximated spectrum of dichroic mirrors for simplicity and vector space description. By this method, we found optimal half-power wavelengths in dichroic mirrors which maximized our performance criterion.

• Journal of the Optical Society of Korea
• /
• v.20 no.3
• /
• pp.363-367
• /
• 2016

In this paper, we present a resolution-enhanced computational integral imaging reconstruction method by using boundary folding mirrors. In the proposed method, to improve the resolution of the computationally reconstructed 3D images, the direct and reflected light information of the 3D objects through a lenslet array with boundary folding mirrors is recorded as a combined elemental image array. Then, the ray tracing method is employed to synthesize the regular elemental image array by using a combined elemental image array. From the experimental results, we can verify that the proposed method can improve the visual quality of the computationally reconstructed 3D images.

• Korean Journal of Optics and Photonics
• /
• v.11 no.1
• /
• pp.43-46
• /
• 2000

We generated 9-fs pulses from a Kerr-lens mode-locked Ti:sapphire laser only using commercial optical components. Two sets of prisms pair made of fused silica were used to compensate group delay dispersion inside and outside the laser oscillator respectively, and broadband mirrors were used to obtain a broad spectrum. By comparison between reflectance curves of the broadband mirrors and those of previous ones, broadband mirrors which have high reflectance bandwidth of over 180 nm were found to be essential to produce sub-IO-fs pulses. ulses.

• Journal of Integrative Natural Science
• /
• v.4 no.1
• /
• pp.11-14
• /
• 2011

Free-standing multilayer distributed Bragg reflectors (DBR) porous silicon dielectric mirrors, prepared by electrochemical etching of crystalline silicon using square wave currents are treated with polymethylmethacrylate (PMMA) to produce flexible, stable composite materials in which the porous silicon matrix is covered with caffeine-impregnated PMMA. Optically encoded free-standing DBR PSi dielectric mirrors retain the optical reflectivity. Optical characteristics of free-standing DBR PSi dielectric mirrors are stable and robust for 24 hrs in a pH 12 aqueous buffer solution. The appearance of caffeine and change of DBR peak were simultaneously measured by UV-vis spectrometer and Ocean optics 2000 spectrometer, respectively.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.248-249
• /
• 2003

The characterization of laser mirrors is important for obtaining proper performance of femtosecond lasers. Characteristics of laser mirrors are usually described in terms of their reflectivity at a certain wavelength. In femtosecond laser applications, however, the dispersion property of the mirror should be considered because the temporal shape of a femtosecond light pulse changes during the reflection at the mirrors. (omitted)

• Journal of the Optical Society of Korea
• /
• v.5 no.3
• /
• pp.70-75
• /
• 2001

Next Generation Space Telescope (NGST) is under design study for proposed launch around 2008. It will take over the task of Hubble Space Telescope (HST) and provide much more detailed information about celestial objects. Present large telescopes both in space and on the ground contain aspheric mirrors, called Ritchey-Chretien type. As the size of the telescope becomes larger and the optical quality is requested to be higher, reaching the diffraction limit, more accurate optical testing methods are required. However, there are few testing methods which can achieve the required accuracy for aspheric optics, and none of them has achieved it with certainty. The failure of producing the primary mirror of the Hubble Space Telescope to meet specification is a good example. Moreover, testing aspheric mirrors of large convex form adds the difficulty to extreme. In this paper, space telescopes and large ground-based telescopes are surveyed and testing methods for aspheric optics are reviewed. a method of testing aspheric convex mirrors is suggested.

• Journal of Conservation Science
• /
• v.22
• /
• pp.87-98
• /
• 2008

Microstructures and chemical compositions of 24 bronze mirrors recovered from the Korean peninsula were examined using the scanning electron microscope equipped with the energy dispersive spectrometer in an effort to characterize the treatments applied on their surface. Their provenance and chronology are mostly unspecified except for two objects from a Koryo burial site. In antiquity the surface of bronze mirrors was frequently finished by mere polishing when their tin content was high enough to guarantee the required reflectivity. In many cases, however, their surface was given a special treatment. The most typical treatment was to coat the surface with tin in two different processes referred to as wipe-tinning and amalgam-tinning. In wipe-tinning only tin was used, but in amalgam-tinning tin and mercury were used together. The surface was often coated with mercury in a process known as mercury-polishing. The present mirrors showed that all these techniques were in fact practiced, not only on the reflective surface but, in some cases, on the decorative surface. The detection of mercury played a crucial role in the assessment of a specific technique applied in each mirror. Mercury often remained in the substrate in the form of sulfide and thereby allowed the method of surface treatment to be estimated even when the coated layer was completely lost. The future study is expected to uncover the regional and temporal variation of the surface treatments to the better understanding of bronze mirrors with respect to provenance and chronology.

• Korean Journal of Optics and Photonics
• /
• v.33 no.5
• /
• pp.218-229
• /
• 2022

We have investigated reliable inspection methods for finding the defects generated during the manufacturing process of lightweight, large-aperture satellite telescope mirrors using silicon carbide, and we have measured the basic physical properties of the mirrors. We applied the advanced ceramic material (ACM) method, a combined method using liquid-silicon penetration sintering and chemical vapor deposition for the carbon molded body, to manufacture four SiC mirrors of different sizes and shapes. We have provided the defect standards for the reflectors systematically by classifying the defects according to the size and shape of the mirrors, and have suggested effective nondestructive methods for mirror surface inspection and internal defect detection. In addition, we have analyzed the measurements of 14 physical parameters (including density, modulus of elasticity, specific heat, and heat-transfer coefficient) that are required to design the mirrors and to predict the mechanical and thermal stability of the final products. In particular, we have studied the detailed measurement methods and results for the elastic modulus, thermal expansion coefficient, and flexural strength to improve the reliability of mechanical property tests.