• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
• /
• pp.125-126
• /
• 2008

A differential capacitance deviation-to-time converter for interfacing position sensor is presented. It consists of triaxial position sensor, six comparators, six current mirrors, and control logic. The prototype differential capacitance deviation-to-time interval converter has been simulated using Chartered $0.35-{\mu}m$ CMOS parameters. The simulation results show that the maximum conversion time of the converter is $350{\mu}s$ and the linearity error is less than ${\pm}0.00l5%$.

• 한국정보전자통신기술학회논문지
• /
• 제5권2호
• /
• pp.81-88
• /
• 2012

Future vehicle must be both driver-friendly and able to adapt to changes in the road's conditions. The system is needed to adapt to both the driver and the circumstance for maximum convenience and safety. In order to solve these problems, this paper proposes an algorithm for developing smart vehicles. In this paper, it is simulated to compare the performance of a normal car with that of the algorithm-implemented vehicle in a potential accident. Through the computer simulation, it proved that the algorithm-implemented vehicle automatically adjusted the mirrors and seat for the maximum comfort and driver's awareness of the circumstance.

• 한국의류학회지
• /
• 제2권1호
• /
• pp.117-124
• /
• 1978

The costume, considered as a manner of clothing, represents the distinctive character of a country, of an epoch, of a personage; and always it mirrors the vicissitudes of human civilization. It is interesting to study the costume of ancient Western Asia, its civilization and culture were transmitted to Egypt and Greece. The results obtained are as follows: 1. Loin clothes, tunics, wraps were in Western Asia. 2. Sleeves and Trousers has been the great contribution to costume. 3. The Art of dyeing, weaving, and embroidering were well known. 4. Tassels and Fringes were used in Western Asia. 5. Egypt and Greece were affected by Western Asia.

• 한국가구학회지
• /
• 제21권2호
• /
• pp.196-204
• /
• 2010

This study focuses on wardrobes to examine how the terms have been changed by comparing traditional Korean furniture in Chosun Dynasty and contemporary furniture since the traditional furniture terms and forms have been changed like our life culture. For chests and wardrobes, approximately 26 terms were used in Chosun Dynasty. However, only five of them are currently used for top panels, hinges, drawers, mirrors, and columns. For bedroom cabinets, 27 terms are used and 4 of them are changed with the same meaning. The change of the terminology results from the life culture mostly. While the Chosun Dynasty furniture terms were mostly presented as the Korean and Chinese language, in the contemporary furniture ones Korean and Chinese together with English are used. The English terms' usage results from hardwares imported from overseas. The terms derived from the three different languages are presented not only in the wardrobes but also other pieces generally.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2005년도 한국우주과학회보 제14권2호
• /
• pp.149-152
• /
• 2005

High-resolution telescope from space comprises electro-optical imagery with a ground resolution tying within the range of 1 to 5 meters. According to information documented in the literature up to now, most primary mirrors verified and flown in optical space missions have been lightweighted made from Zerodur, ULE, beryllium, SiC or aluminium. A trade off study was performed to determine as a &lightweighted& by factors like backside cell pattern, rib thickness, face thickness, mirror fixation device location and material and so on based on structural performance for primary mirror in submeter class spaceborne telescope.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.376-377
• /
• 2006

Chemical Mechanical Planarization (CMP) has emerged as an enabling technology for the manufacturing of multi-level metal interconnects used in high-density Integrated Circuits (IC). Recently, multi-level structures have been also widely used m the MEMS device such as micro engines, pressure sensors, micromechanical fluid pumps, micro mirrors and micro lenses. Especially, among the thin films available in IC technologies, polysilicon has probably found the widest range of uses in silicon technology based MEMS. This paper presents the characteristic of polysilicon CMP for multi-level MEMS structures. Two-step CMP process verifies that is possible to decrease dishing amount with two type of slurries characteristics. This approach is attractive because two-step CMP process can be decreased dishing amount considerably more then just one CMP process.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book I
• /
• pp.203-224
• /
• 2003

In recent years, a miniature spectrometer has been extensively developed due to the combination of fiber optics and semiconductor detector arrays. This type of miniature spectrometer has advantages of low price and robustness because of the capability of mass production and no moving parts are required such as lenses, mirrors and scanning monochromator. In this study, for skin diagnostics, a portable near infrared (NIR) system has been developed using a LlGA microspectrometer, which is photo-diode arrays-type.(omitted)

• Journal of the Optical Society of Korea
• /
• 제16권1호
• /
• pp.80-84
• /
• 2012

A high reflectance mirror, which has very low absorption and scattering loss, was coated onto a crystalline substrate by ion beam sputtering and then annealed at $450^{\circ}C$. We carefully selected the mirror coating material, and designed the high reflectance mirror, in order to avoid UV degradation which comes from the He-Ne plasma. We measured the surface roughness of the Zerodur substrate using phase shift interferometry and atomic force microscopy, and compared it with the TIS scattering of the mirror. The cavity ring-down method was used to measure the absorption of the mirror, and the thin film structure was correlated to its results. We also compared the optical properties of coated mirrors before and after annealing.

• ETRI Journal
• /
• 제29권6호
• /
• pp.817-819
• /
• 2007

A low-stress organic polymer membrane is proposed as a deformable mirror that can be incorporated into a cellular phone camera to achieve auto focusing without motor-type moving parts. It is demonstrated that our fabricated device has an optical power of 20 diopters and can switch focus in 14 ms. The surface roughness of the organic membrane is measured around 15 nm, less than ${\lambda}$/20 of the visible light. With curve fitting, we found that the actuated membrane is almost parabolic in shape, which leads to less aberration than spherical surfaces. It is suitable for reflective-optics systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.632-635
• /
• 1996

Flexible parts can be deformed by the contact forces during assembly on the con to rigid parts and thus their successful assembly requires informations about their deformation as well as a misalignment between mating parts. However, because of the nonlinear and complex relationship between parts deformation and assembly reaction forces, it is difficult to acquire all required informations from only the reaction forces during assembly. In this paper, we propose a sensing system consisting of a camera and multiple mirrors for flexible parts assembly. Simulation results show that the system can be effectively used for detecting parts deformation and a misalignment between mating parts.