선진국에서는 다양한 건축용도의 위험등급을 분류하여 해당 위험등급의 수준에 적합한 방수패턴을 가진 스프링클러의 방수규격을 기준으로 용도별 위험등급 기반의 성능설계를 실시하고 있는 반면에, 국내에서는 건축공간용도의 거주밀도나 화재하중밀도가 표준화하고 있지 않아 위험등급조차 설정하지 않은 채 균일한 방수패턴을 가진 표준형 스프링클러 헤드를 일률적으로 적용하고 있는 실정이다. 이런 실정으로 인해 국내에서는 스프링클러의 방수패턴에 대한 요구사양이 다양하게 필요하지 않아 선진국과 같이 다양한 방수상수를 가지면서 방호면적을 달리하는 다양한 종류의 헤드 개발이 이루어지지 않고 있는 실정이다. 그러므로 국내의 주요 건축공간용도에 대한 화재하중밀도를 조사하여 표준 값을 제시하고 영국 LPC나 미국 NFPA에서 정하고 있는 위험등급별로 분류한 결과 크게 다르지 않음을 발견하였다. 따라서 공간용도별 위험등급 기반의 성능 설계를 우리나라에서 적용하기위한 기초적인 토대를 마련하고 국내 스프링클러 헤드개발환경을 개선하기 위한 오리피스와 방수상수를 다양화함으로써 특수한 고위험공간용도에서 효과적으로 적용 가능한 라지 드롭형, ELO형, 또는 ESFR형 등의 스프링클러 헤드 개발을 촉진하도록 유도하였다. 결론적으로 위험등급별로 다양하게 적용되는 스프링클러 헤드를 체계적으로 분류하여 국내 건축용도에 적용 가능한 최적의 방수패턴에 대한 기본사양을 정립하여 제시하였다.
The successful and sustainable growth of SMEs depends on their ability of strengthen their competitiveness in quality and cost and service more than anything else as a fundamental of operation. Among these key competitive factors of SMEs, quality is the most critical factor in manufacturing business fields. Because quality strongly influence cost and service performance on this manufacturing business field. There are many different ways to improve the quality performance but it needs proper management decision to choose the best way what can maximize outputs with minimum inputs. And it needs effective measurement methods and some indicators to analysis the quality performance properly. The quality cost is one of the simplest key indicators to measure the quality performance and the effectiveness of quality related management decisions. The major purpose of this study is to diagnose the categorized current level of actual quality cost of local SMEs to maximize their quality management effectiveness through comparing their level with others what's expressed in early studies. In this study, through survey on local SMEs, we found that their average annual quality cost ratio versus turnover - Total amount of annual quality cost divided by annual turnover - is around 3.69% excluded some SME's performances what have different quality control measures with others. And we found some results what corresponded with the early studies on the correlations between those categorized quality costs factors and some discrepancies between some of the literature model and the early case study results as follows. There were negative correlations between the Prevention costs and the External failure costs, and the Appraisal costs and the External failure costs, and there was positive correlation between the Appraisal costs and Internal failure costs same as early studies. But, we couldn't found any strong negative correlations between the Cost of control - Preventive costs & Appraisal costs - and the Cost of Failure of control - Internal & External failure costs -. It reveals not only the lack of effectiveness on their preventive or appraisal activities but also it can reveal there were so many effective ways to prevent the failure costs properly such as some innovative investment on Factory automation includes Error Proofing and more preventive actions to improve the effectiveness of the typical management methods likes CE (Concurrent Engineering), APQP (Advanced Product Quality Planning), FMEA (Failure Mode & Effect Analysis) etc.
자색 고구마로부터 페놀성 화합물 추출 최적 조건은 50% 에탄올로 12시간 추출하였을 때 최대 용출량을 나타내었다. 불과 50% 에탄올을 용매로 하여 제조한 자색 고구마 종류별 추출물의 항산화 활성 측정 결과 전자공여능, ABTS, PF 측정에서 일반 고구마에 비하여 자색 고구마 자미, 신자미, 연자미 품종 모두 높게 나타났으며, TBARs 측정결과 모든 추출물에서 30% 이하로 낮은 TBARs 생성 억제활성을 나타내었다. 피부상재균에 대한 최소저해농도(MIC)를 측정한 결과 Staphylococous aureus 및 Escherichia coli에 대한 MIC는 자미, 연자미, 신자미에서 각각 5,000 및 2,500 ppm으로 나타났으며, Staphylococous epidermidis에 대한 MIC는 자미가 2,500 ppm으로 가장 낮은 농도를 나타내었다. 자색고구마 추출물의 화장품활성을 살펴본 결과 미백활성은 자미 품종 물 추출물에서 60% 이상으로 가장 높았으며, 자미 알콜추출물의 경우도 48.7%의 높은 미백활성을 나타내었다. 모든 자색고구마 품종에서 수렴활성과 주름개선효과는 관찰할 수 없었으나, 항염증 활성은 높게 관찰되었으며, 자미 품종의 에탄올 추출물이 94.4%로 가장 높게 나타났다. 자미 추출물을 첨가한 화장품의 온도 및 자연광에 의한 성상 변화는 확인되지 않았으며, 첩포시험을 통한 자각 증상도 나타나지 않았다. 또한 크림 사용 후 피부톤의 변화와 모공의 크기 변화를 측정한 결과 노화가 많이 일어난 피부가 젊은 피부보다 더 높은 긍정적인 효과를 나타내었다.
본 연구에서는 철재형 이안제를 설계하기 위한 하부기초의 설계과정을 제시하고, 시험시공 현장에 대한 실시설계를 실시하였다. 본 구조물이 시험시공될 예정지인 경상북도 울진군 오산항 인근 해역에 대한 지반조사를 실시하였다. 대상기초는 압축력이 아닌 파력에 의한 수평력과 인발력에 의존한다. 상부 구조물이 해저면에서 약 9.0 m 돌출되어 있으므로 말뚝두부에 파력에 의한 수평하중이 재하되며 휨강성에 대한 저항력이 중요하다. 검토 결과 철재형 이안제의 기초로 강관말뚝(${\varphi}711$-12t)으로 결정하였다. 외부하중에 대한 말뚝기초의 안정성을 평가한 결과, 연직지지력, 인발저항력 및 수평저항력은 기준 안전율보다 크게 나타났다. 상용하중 작용시 발생되는 기초의 변위는 허용량 이내인 것으로 평가되었다. 지반반력법을 통하여 지층의 횡방향 및 축방향 지반반력과 변위관계를 산정할 수 있었다. 이를 토대로 상부구조의 해석을 수행하고 결과를 정량적으로 비교하였다.
This study derived measures to reduce exposure doses by identifying factors which affect the external radiation dose rate of patients treated with radiopharmaceuticals for PET-CT tests. The external radiation dose rates were measured on three parts of head, thorax and abdomen at a distance of 50cm from the surface of 60 PET-CT patients. It showed there are changes in factors affecting the external radiation dose rate over time after the administration of F-18 FDG. The external radiation dose rate was lower in the patients with more water intake than those with less water intake before the injection of radiopharmaceuticals at all three points: right after the injection of radiopharmaceuticals (average 4.17 mins), after the pre-PEET-CT urination step (average 77.47 mins), and right after the PET-CT test (average 114.15 mins). The study also found there is a need to increase the amount of water intake before the injection of radiopharmaceuticals in order to maintain a low external radiation dose rate in patients. This strategy is only possible under the assumption that the quality of the video has not changed after conducting this study on the relations between the image and quality. This study also found a need to use radiopharmaceuticals with the minimum amount needed for each patient because F-FDG doses affects the external radiation dose rate at the point right after the injection of radiopharmaceuticals. Urination frequency was the most significant factor to affect the external radiation dose rates at the point right after the PET-CT test and the point after the pre-PET-CT urination step. There is a need to realize the strategy to increase the urination frequency of patients to maintain the external radiation dose rate low (average 77.47 mins) before and after the injection of radiopharmaceuticals. In addition, at this point, there is a need to take advantage of personal strategies because the external radiation dose rate is lower if the fasting time is shorter, the contrast medium is used, and the amount of water intake is increased after the administration of radiopharmaceuticals. Finally this study found the need to be able to generalize these findings through an in-depth research on the factors affecting the external radiation dose rate, which includes radiopharmaceutical dose, urination frequency, the amount of water intake, fasting time and the use of contrast medium.
한국암반공학회 2000년도 암반공학문제의 수치해석(Numerical Analysis in Rock Engineering Problems)
/
pp.183-193
/
2000
본 논문에서는 인도네이사 Kalirnantan섬에 위치하는 Pasir탄전의 노천채탄장을 대상으로 기존 지질자료의 분석 및 지질조사, 암반평가, 현지 및 실험실 시험을 통하여 관련 암석들에 대한 물성시험의 수행과 평사투영법과 수치해석에 의한 안정성해석 등을 근거로 채광장내의 전체사면 특히 Roto 북부 및 남북구역의 사면을 적절하게 설계할 수 있는 방안을 재시하고자 하였다. Roto 지역의 주요 불연속면들은 주로 층리로 구성되어 있으며, 층리의 경사는 북쪽의 약 $60^{\circ}$ 에서 남쪽 지역은 $80^{\circ}$ 전후로 남으로 가면서 경사가 급해지며, 많은 사면에서 평면파괴와 전도파괴가 일어나고 있따. Roto 전 지역의 암석물성 시험결과는 이암온 평균 일축압축강도가 9MPa 이고, 사암은 12MPa로 이암보다는 다소 강도가 높다. 현장조사에 의한 암질을 국제암반역학회 분류기준에 따라 분류하면 Roto 북부지역의 암석은 R2~R3 등급에 속할 정도로 대부분 연약하였으며, 석탄층의 강도는 R1~R2 등급에 해당된다. Roto 북부의 4개 지역(동부, 서부,남부 및 북부)과 Roto 남부의 2개 지역(동부 및 서부)의 사면에 대한 상세한 안정성 해석이 수행되었다. 본 연구에서는 최소 사면안전율을 1.2로 결정하여 평사투영법과 한계평형법의 해석을 통해 계산된 30~60$60^{\circ}$의 사면 경사각에 대하여 다시 유한차준법(FLAC)에 의한 안정성 분석을 실시하였다. 최종 사면각으로 Roto 북부지역의 동부사면은 $34^{\circ}$, 서부사면은 $33^{\circ}$, 북부사면은 $32^{\circ}$, 그리고 Roto 남부의 최종사면각은 동부 및 남부사면 모두 $36^{\circ}$로 제안하였다. 본 노천채탄장의 최종사면과 같이 장기적인 유지를 필요로 하는 사면은 사면의 변형거동을 감시하기 위해 보다 체계적인 계측을 필요로 하며, 또한 사면이 많은 비에 노출되기 쉽기 때문에 사면의 풍화와 침식에 대한 대책연구도 수행되어야 한다.
본 논문에서는 인도네시아 Kalimantan섬에 위치하는 Pasir 탄전의 노천채탄장을 대상으로 기존 지질자료의 분석 및 지질조사, 암반평가, 현지 및 실험실 시험을 통하여 관련 암석들에 대한 물성시험의 수행과 평사투영법과 수치해석에 의한 안정성해석 둥을 근거로 채광장내의 전체사면 특히 Roto 북부 및 남부구역의 사면을 적절하게 설계할 수 있는 방안을 제시하고자 하였다. Roto 지역의 주요 불연속면들은 주로 층리로 구성되어 있으며, 층리의 경사는 북쪽의 약 60$^{\circ}$에서 남쪽 지역은 80$^{\circ}$ 전후로 남으로 가면서 경사가 급해지며, 많은 사면에서 평면파괴와 전도파괴가 일어나고 있다. Roto 전 지역의 암석물성 시험결과는 이암은 평균 일축압축강도가 9MPa 이고, 사암은 12MPa 로 이암보다는 다소 강도가 높다. 현장조사에 의한 암질을 국제암반역학회 분류기준에 따라 분류하면 Roto 북부지역의 암석은 R2~R3 등급에 속할 정도로 대부분 연약하였으며, 석탄층의 강도는 R1~R2 등급에 해당된다. Roto 북부의 4개 지역 (동부, 서부, 남부 및 북부) 과 Roto 남부의 2개 지역(동부 및 서부)의 사면에 대한 상세한 안정성 해석이 수행되었다. 본 연구에서는 최소 사면안전율을 1.2로 결정하여 평사투영법과 한계평형법의 해석을 통해 계산된 30~36$^{\circ}$의 사면경사각에 대하여 다시 유한차분볍 (FLAC)에 의한 안정성 분석을 실시하였다. 최종 사면각으로 Roto 북부지역의 동부사면은 34$^{\circ}$, 서부사면은 33$^{\circ}$, 남부사면은 35$^{\circ}$, 북부사면은 32$^{\circ}$, 그리고 Roto 남부의 최종사면각은 동부 및 남부사면 모두 36$^{\circ}$로 제안하였다. 본 노천채탄장의 최종사면과 같이 장기적인 유지를 필요로 하는 사면은 사면의 변형거동을 감시하기 위해 보다 체계적인 계측을 필요로 하며, 또한 사면이 많은 비에 노출되기 쉽기 때문에 사면의 풍화와 침식에 대한 대책연구도 수행되어야 한다.
흰개미는 산림생태계의 분해자로 중요한 역할을 담당하지만 목조건축물과 농작물의 중요 피해 요인으로 막대한 경제적 피해를 입힌다. 현재 국내에서는 지중흰개미 2종이 서식하는 것으로 보고되어 있으며 기후변화와 산림비옥화, 산림과 인접한 문화재의 입지적 특성 등과 맞물려 목조건축문화재의 흰개미 피해가 전국적으로 나타나고 있다. 지중흰개미는 땅 속이나 목재 내부에 서식하며 땅 속으로 이동하여 지면과 인접한 기둥 하부, 하인방 등을 통해 목조건축물로 유입된다. 흰개미 피해를 입은 목부재는 내부가 공동화되어 문화재 고유의 진정성을 훼손할 뿐 아니라 재료의 강도 저하로 인해 구조적 안정성 또한 저해되므로, 흰개미 피해가 발생하기 전 예방하는 것이 중요하다. 현재 흰개미 방제와 피해 예방을 위해 국내에서는 훈증, 토양 처리, 군체 제거 등 화학적 처리 방법들이 주로 활용되고 있다. 외국에서는 흰개미 피해 예방을 위해 화학적 약제 처리와 함께 흰개미가 목조건축물로 유입되는 것을 물리적으로 차단하는 물리적 장벽이 활용되고 있다. 물리적 장벽은 흰개미가 통과하지 못하는 망이나 입자 등을 건물 하부, 배관 주변, 건물 가장자리나 외벽과 내장재 사이 등에 설치하는 방법으로 설치 후 장기간 효력이 유지되며 약제를 사용하지 않는 친환경 방식이라는 장점이 있다. 물리적 장벽의 적용을 위해서는 흰개미 종의 생태적 특성에 대한 연구가 선행되어야 한다. 이에 본 연구에서는 국내 전역에 서식하는Reticulitermes Speratus kyushuensis를 대상으로 각 계급별 통과 가능한 최소 직경을 확인하고자 하였다. 통로가 0.1mm 단위로 좁아지는 아크릴 평면 실험 장치를 이용하여 흰개미 계급별로 통과할 수 있는 최소 직경을 평가한 결과, 일흰개미는 0.7mm, 병정흰개미는 0.9mm, 2차 생식흰개미는 1.1mm까지 통과할 수 있었으며 일흰개미의 머리 높이가 최소 통과 직경을 결정하는데 있어 중요한 요인임을 확인하였다. 이 결과는 향후 흰개미 피해 예방을 위해 망 형태의 물리적 장벽을 적용할 때 각 눈의 최대 크기를 결정하는 기준으로 활용될 수 있을 것으로 기대된다.
가연성 물질을 사용하는 화학공정 산업에서 저장 안전성을 높이고 화재 및 폭발 예방 조치를 설계하려면 신뢰할 수 있는 인화점에 대한 정보가 필요하다. 본 연구는 석유화학 공정에서 중요한 용매와 가솔린의 옥탄가 향상제로 사용되는 방향족, 나프텐 및 파라핀계 탄화수소 화합물과 알킬알코올에 대한 이성분 혼합물의 인화점 데이터를 얻는 것이다. 그래서 이성분 혼합물인 {2-butanol + 2,2,4-trimethylpentane}, {2-butanol + methylcyclohexane} 그리고 {2-butanol + toluene} 계에 대한 최소인화점을 Stanhope-Seta 밀폐식 인화점 측정기를 이용하여 측정하였다. 각 이성분계 혼합물에 대한 인화점을 예측하기 위해 이상성인 라울의 법칙(Raoult's law)과 비이상성인 Wilson, NRTL 그리고 UNIQUAC 매개변수를 이용하였고 실험 결과와 비교해 보았다. 이상성을 나타내는 라울의 법칙(Raoult's law)보다 비이상 용액 혼합물의 활동도 계수 모델에서 2.36 K 이하의 좋은 결과를 나타내었다. 본 연구의 결과는 가연성 혼합물을 함유한 석유화학 용매의 안전한 저장 및 공정 설계에 적용할 수 있다.
The difficulties of satellite vibration testing are due to the commonly expressed qualification requirements being incompatible with the limited performance of the entire controlled system (satellite + interface + shaker + controller). Two features cause the problem: firstly, the main satellite modes (i.e., the first structural mode and the high and low tank modes) are very weakly damped; secondly, the controller is just too basic to achieve the expected performance in such cases. The combination of these two issues results in oscillations around the notching levels and high amplitude beating immediately after the mode. The beating overshoots are a major risk source because they can result in the test being aborted if the qualification upper limit is exceeded. Although the abort is, in itself, a safety measure protecting the tested satellite, it increases the risk of structural fatigue, firstly because the abort threshold has been already reached, and secondly, because the test must restart at the same close-resonance frequency and remain there until the qualification level is reached and the sweep frequency can continue. The beat minimum relates only to small successive frequency ranges in which the qualification level is not reached. Although they are less problematic because they do not cause an inadvertent test shutdown, such situations inevitably result in waiver requests from the client. A controlled-system analysis indicates an operating principle that cannot provide sufficient stability: the drive calculation (which controls the process) simply multiplies the frequency reference (usually called cola) and a function of the following setpoint, the ratio between the amplitude already reached and the previous setpoint, and the compression factor. This function value changes at each cola interval, but it never takes into account the sensor signal phase. Because of these limitations, we firstly examined whether it was possible to empirically determine, using a series of tests with a very simple dummy, a controller setting process that significantly improves the results. As the attempt failed, we have performed simulations seeking an optimum adjustment by finding the Least Mean Square of the difference between the reference and response signal. The simulations showed a significant improvement during the notch beat and a small reduction in the beat amplitude. However, the small improvement in this process was not useful because it highlighted the need to change the reference at each cola interval, sometimes with instructions almost twice the qualification level. Another uncertainty regarding the consequences of such an approach involves the impact of differences between the estimated model (used in the simulation) and the actual system. As limitations in the current controller were identified in different approaches, we considered the feasibility of a new controller that takes into account an estimated single-input multi-output (SIMO) model. Its parameters were estimated from a very low-level throughput. Against this backdrop, we analyzed the feasibility of an LQG control in cancelling beating, and this article highlights the relevance of such an approach.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.