• 한국지진공학회논문집
• /
• 제22권2호
• /
• pp.45-54
• /
• 2018

The seismically isolated nuclear power plants shall be designed for design basis earthquake (DBE) and considered to ensure safety against beyond design basis earthquake (BDBE). In order to limit the excessive displacement of the seismic isolation system of the seismically isolated structure, the moat is installed at a certain distance from the upper mat supporting the superstructure. This certain distance is called clearance to stop (CS) and is calculated from the 90th percentile displacement of seismic isolation system subjected to BDBE. For design purposes, the CS can be obtained simply by multiplying the median displacement of the seismic isolation system against DBE by scale factor with a value of 3. The DBE and BDBE used in this study were generated by using 30 sets of artificial earthquakes corresponding to the nuclear standard design spectrum. In addition, latin hyper cube sampling was applied to generate 30 sets of artificial earthquakes corresponding to maximum - minimum spectra. For the DBE, the median displacement and the 99th percentile displacement of the seismic isolation system were calculated. For the BDBE, the suitability of the scale factor was assessed after calculating the 90th percentile displacement of the seismic isolation system.

• 농업과학연구
• /
• 제48권4호
• /
• pp.1003-1013
• /
• 2021

Thioredoxin (TRX) protein is an antioxidant responsible for reducing other proteins by exchanging cysteine thiol-disulfide and is also known for its anti-allergic and anti-aging properties. On the other hand, epidermal growth factor (EGF) is an important material used in the cosmetics industry and an essential protein necessary for dermal wound healing facilitated by the proliferation and migration of keratinocytes. EGF also assists in the formation of granulation tissues and stimulates the motility of fibroblasts. Hence, genetically modified soybeans were developed to overexpress these industrially important proteins for mass production. A single-dose oral-toxicity-based study was conducted to evaluate the potential toxic effects of TRX and EGF proteins, as safety assessments are necessary for the commercial use of seed-specific protein-expressing transgenic soybeans. To achieve this rationale, TRX and EGF proteins were mass purified from recombinant E. coli. The single-dose oral-toxicity tests of the TRX and EGF proteins were carried out in six-week old male and female Institute of Cancer Research (ICR) mice. The initial evaluation of the single-dose TRF and EGF treatments was based on monitoring the toxicity signatures and mortality rates among the mice, and the resultant mortality rates did not show any specific clinical symptoms related to the proteins. Furthermore, no significant differences were observed in the weights between the treatment and control groups of male and female ICR mice. After 14 days of treatment, no differences were observed in the autopsy reports between the various treatment and control groups. These results suggest that the minimum lethal dose of TRX and EGF proteins is higher than the allowed 2,000 mg·kg^-1 limit.

• 한국해안·해양공학회논문집
• /
• 제21권4호
• /
• pp.316-325
• /
• 2009

국제적인 항만시설물 사면안정해석 설계기준을 분석하고 그 결과를 비교하였다. 사면안정해석에 사용된 설계기준은 한계상태 설계법에 근거한 중국, 유럽 및 일본의 설계방법이다. 사면안정해석시 공통적으로 파괴활동면은 원호 활동면 가정을 기본으로 하고 있다. 해석방법에 있어서 중국은 수정 Fellenius법에 근간하고 있으나 근래에 간편 Bishop법으로 변화하고 있다. 유럽은 Morgenstern & Price법 또는 Bishop법을 추천하고 있다. 반면, 일본은 수정 Fellenius법을 우선시하고 간편 Bishop법은 두꺼운 사질토 지반 등에 선택적으로 이용하도록 하고 있다. 특별하게도 유럽은 포괄적 부분계수 및 재료계수를 규정하는 반면, 일본은 각 구조물별로 경험적 재료계수를 명시하고 있다. 중국에서는 포괄적 부분계수의 최소범위를 규정하고, 안정조건에 따라 특정한 시험에 의한 강도지수를 사용하도록 구체적으로 명시하고 있다. 설계사례를 통한 사면안전율을 비교한 결과, 중국, 일본 및유럽 순으로 높게 나타났다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2003년도 추계학술발표회
• /
• pp.181-185
• /
• 2003

한국 서해는 주변해역에 비해 얕은 수심과 낮은 저열량으로 다른 해역에 비해서 대기의 역할이 더 중요하다. 이들의 관계를 파악하기 위해 국립수산과학원의 정선관측 자료, 연안정지 자료와 기상청 자료를 사용하였다. 수온, 염분과 기상인자들은 8월에 최고치가 되고, 2월에 최소치가 되는 계절변동을 한다. 수온과 염분은 수심이 깊어질수록 최고$\cdot$저 값에 이르는 시간지연이 나타난다. 수심 100m에 달하는 311-07점의 75m수층의 수은의 시계열은 10월에 최고치, 4월에 최저치에 달한다. 기상인자와 수온, 염분과의 상관관계를 분석하였다. 기상인자는 기온, 풍속, 강수량을 사용하였다. 수온-기온, 수온-강수, 염분-풍속은 정관계를 보였다. 그리고 수온-풍속, 염분-기온, 염분-강수는 역관계를 나타내었다. 307-05의 염분을 제외한 모든 연구해역에서 수심 20m를 기준으로 표층보다 2개월에서 4개월 느리게 최대치가 되었다. 307-05의 염분은 기상인자와의 관계에서 50m 수층에서 시간지연을 보였다.

• 한국기계가공학회지
• /
• 제19권9호
• /
• pp.78-84
• /
• 2020

This paper introduces the structural and vibration analysis performed in the localization development process of hydraulic pumps used in wheeled armored vehicles. The maximum strain, maximum stress, maximum displacement, and minimum safety factor were calculated using structural analysis. Furthermore, it was found that the dangerous resonance frequency was avoided through vibration analysis. In addition, the reliability of the analysis results was verified by passing various tests, such as the actual vibration test and the actual durability test. The developed hydraulic pump is expected to contribute significantly to the maintenance of military vehicles in the future.

• Journal of Preventive Medicine and Public Health
• /
• 제31권3호
• /
• pp.440-448
• /
• 1998

In many developed countries, for example, USA, respirator fit testing is required before entering specific work environment to ensure that the respirator worn satisfies a minimum of fit and that the user knows when the respirator fits properly. Unfortunately because we have not fit test regulation in Korea, a lot of workers wearing respirators may be potentially exposed to hazards. This study was conducted to evaluate the fitting performance for respirators and correlation fit factors with facial dimensions of wearers. 110 subjects (70 males, 40 females) were fit tested for three quarter masks, i.e., two domestic-made Mask 2, and Y and one foreign-made Mask T using PortaCount 8020. A facial dimension survey of the same subjects was conducted to develop a facial dimension grids fer correlation fit factors with facial dimension parameters. A facial dimension grid was developed on the basis of face length and lip length for quarter masks. The results obtained were as follows : 1 Fit factors of Mask T were much higher than those of Masks Z, and Y. 2. Males were fitted more properly than females. 3. Male in box 'f' of grid would be adequately fitted Mask Y and male in box 'b', 'e', 'f', 'h' of grid would be sufficiently fitted Mask T. Female in box 'h' of grid may have a good fitting performance for both Mask Y, and T. But subjects in all boxes of grid would be inadequately fitted Mask Z.

• 대한치과기공학회지
• /
• 제27권1호
• /
• pp.105-113
• /
• 2005

The purpose of this study is to evaluate the effect of loading at three different occlusal surface position of the gold alloy crown on the stress distributions in surrounding bone, utilizing 3-dimensional finite element method. A three dimensional finite element model of an implant with simplified gold alloy crown and supporting bone was developed for this study. A oblique or vertical load of 100 N was applied at the following position at each FE model : 1) center of occlusal surface, 2) a point on the buccal side away from center of occlusal surface (COS) by 2.8mm, 3) a point on the lingual side away from COS by 2.8mm. In the results, Minimum von Mises stresses under vertical load or oblique load of 100N were about 6MPa at the center of occlusal surface and about 40MPa at the point on the buccal side, respectively. From the results we could come to the conclusion that occlusive loading position could be an important factor for establishment of structural safety of supporting bone.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1121-1126
• /
• 2003

Strength evaluation was carried out for the fillet and oil hole of crankshaft of medium speed diesel HiMSEN engine to verify initial concept design. Alternating torque obtained from torsional vibration analysis and radial force due to firing pressure were applied. It was assumed that the maximum alternating torque and radial force occur simultaneously. Weak points in view of fatigue are proceeding fillet and crank pin fillet area and the minimum normalized fatigue safety factor is 1.17 at crank pin fillet. The fatigue strength of the oil hole was evaluated to verify the effect of the surface roughness of the oil hole. As results, the specific level of the inner surface roughness and the polishing depth of the oil hole for sufficient fatigue strength was suggested. The maximum stress value and stress distribution at the inner surface of the oil hole can be easily estimated at initial design stage by the newly developed method.

• 기술발표회
• /
• 통권2006호
• /
• pp.135-145
• /
• 2006

Soil nailing systems are generally many used in underground excavations and reinforcements of slopes since the first construction as a temporary retaining wall in 1993, Korea. In recently, they are many attempts to expand the permanent reinforcements of slopes However, experimental studies related to soil nailing systems are insufficient Specially, there are no researches related in the large scaled load tests of soil nailed walls in Korea In this study, a case study on the large scaled load tests of soil nailed walls is introduced and the behavior characteristic of them is investigated Also, they are proposed allowable deformation corresponding to the serviceability limit of soil nail walls and ultimate deformation corresponding to the collapse state of the walls. These results can be applied to the maintenance management of soil nailed walls And analysis on the required minimum factor of safety of soil nailed walls using the relation curve of load ratio and deformation ratio are carried out

• 한국경영과학회지
• /
• 제36권3호
• /
• pp.91-105
• /
• 2011

In this paper, we analyze a logistic system involving a supplier who produces and delivers multiple types of items and a buyer who receives and sells the products to end customers. The buyer controls the inventory level by replenishing each product item up to a given order-up-to-level to cope with stochastic demand of end customers. In response to the buyer's order, the supplier produces or outsources the ordered item and delivers them at the start of each period. For the system described above, a mathematical model for a single type of item was developed from the buyer's perspective. Based on the model, an efficient method to find the cycle length and safety factor which correspond to a local minimum solution is proposed. This single product model was extended to cover a multiple item situation. From the model, algorithms to decide the base cycle length and order interval of each item were proposed. The results of the computational experiment show that the algorithms were able to determine the global optimum solution for all tested cases within a reasonable amount of time.