• Journal of the Korean Geographical Society
• /
• v.39 no.5 s.104
• /
• pp.711-721
• /
• 2004

The aim of this study is to clarify whether frequency and/or severity of extreme climate events have changed significantly in Korea during recent years. Using the best available daily data, spatial and temporal aspects of ten climate change indicators are investigated on an annual and seasonal basis for the periods of 1954-1999. A systematic increase in the $90^{th}$ percentile of daily minimum temperatures at most of the analyzed areas has been observed. This increase is accompanied by a similar reduction in the number of frost days and a significant lengthening of the thermal growing season. Although the intra-annual extreme temperature range is based on only two observations, it provides a very robust and significant measure of declining extreme temperature variability. The five precipitation-related indicators show no distinct changing patterns for spatial and temporal distribution except for the regional series of maximum consecutive dry days. Interestingly, the regional series of consecutive dry days have increased significantly while the daily rainfall intensity index and the fraction of annual total precipitation due to events exceeding the $95^{th}$ percentile for 1901-1990 normals have insignificantly increased.

• Fashion & Textile Research Journal
• /
• v.16 no.2
• /
• pp.255-265
• /
• 2014

This study developed and proposed a pattern that can fit the body and compensate for the defects of the body type by applying shoulder princess line to the torso pattern and including formative characteristics of each object on the study of body shape's change in 40-59 year old middle aged women. The results of this study are as follows; First, according to the analysis of 'Size Korea 2010' such as average, standard deviation, minimum value, and maximum value of 48 items, women showed increase in most of the items except height as they became aged. Second, factor analysis was made to understand the shape component factors of middle aged women and to use them for the body type classification. Third, cluster analysis was made according to the shape of front and sides which should be considered in pattern production based on the factor analysis results, and the body type with the measurement values most similar to the average of direct measurement of 'Size Korea 2010' was set as standard. Fourth, in designing torso patterns through the $1^{st}$ and the $2^{nd}$ wearing experiments according to the body type, body shapes such as Chest Circumference, Waist Circumference, Hip Circumference, and Waist Back Length were considered in pattern design, goodness-of-fit was enhanced with difference in margin according to body type and different margins in front and back, and fitting satisfaction was improved by applying princess line.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.5
• /
• pp.693-699
• /
• 2004

Live animal selection programs that favor animals with a minimum amount of carcass fat are used for improving breeding flocks of sheep. To predict carcass characteristics of live sheep using body measurements in breeding flocks, 200 male and female lambs of two fat-tailed Iranian sheep breeds (Moghani and Makui) were used. Depth of soft tissue over the 12th rib of the live animals was measured with ultrasound (ULGR) and with hypodermic needle (NGR). The height at withers (HW), body length (BL), circumference of heart girth (CH) and width of hooks (WH), were measured. All animals were slaughtered; carcasses were cut into joints and dissected. Breed had a significant effect on all of the live easurements. The Moghani breed showed a higher value for HW, CH, ULGR and NGR, compared to that of Makui. Except for soft tissue depths; ULGR, NGR and GR, the male lambs showed higher values in live and carcass measurements than females. Percentages of carcass, total fat and intermuscular fat in females were higher than that of male lambs. In spite of the higher amount of subcutaneous and intermuscular fat in female (which is usually used for their physiological need, such as pregnancy and lactation), the male lambs had a heavier fat-tail than females. There was a wide range of variation of percentage of total carcass fat and total chemical fat content of carcass in the two breeds. Eventually this wide variation could be use by animal breeders for selection of animals with a lesser amount of carcass fat. Live weight of lambs showed a relatively low correlation with percentage of carcass lean, total fat and subcutaneous and intermuscular fat. Total lean meat was predicted with relatively high coefficients of determination in the two breeds ($R^2$=0.61 and 0.89, respectively). Live weight and carcass traits were predicted using simple measurements, but with $R^2$ ranging from 0.53 to 0.93.

• Journal of Korean Neurosurgical Society
• /
• v.44 no.3
• /
• pp.124-130
• /
• 2008

Objective : Our purpose of this study is to compare insertion angles and screw lengths from Roy-Camille, Magerl, and our designed method for cervical lateral mass screw fixation in the Korean population by quantitative measurement of reformatted two dimensional (2D) computed tomography (CT) images. Methods : We selected thirty Korean patients who were evaluated with thin section CT scans and reconstruction program to obtain reformatted 2D-CT images of the transversal plane passing the cranio-caudal angle using three different techniques. We measured the minimum angle to avoid vertebral artery (VA) injury, the ideal angle and depth for bicortical screwing of cervical lateral mass. Morphometric measurements of the lateral masses from C3-C7 were also taken. Results : In all three techniques, the mean safety angles from the VA were less than 8 degrees and the necessary depth of the screw was about 14 mm for safety to the VA and for the bicortical purchase. In our designed technique, the mean $\beta$ angles of each level from C3 to C7 were 29.0. 29.8. 29.5. 26.3. and 23.9 degrees, respectively. Conclusion : Results of this study and data from the literature indicate that differences may exist between the Korean and Western people in the length and angle for ideal lateral mass screw fixation. In addition, our technique needs further cadaveric and clinical study for safety and efficacy for being performed as alternative method for cervical lateral mass fixation.

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.185-195
• /
• 2013

In this paper, we propose a video summarization technique on a smartphone, based on spatiotemporal saliency. The proposed technique detects scene changes by computing the difference of the color histogram, which is robust to camera and object motion. Then the similarity between adjacent frames, face region, and frame saliency are computed to analyze the spatiotemporal saliency in a video clip. Over-segmented hierarchical tree is created using scene changes and is updated iteratively using mergence and maintenance energies computed during the analysis procedure. In the updated hierarchical tree, segmented frames are extracted by applying a greedy algorithm on the node with high saliency when it satisfies the reduction ratio and the minimum interval requested by the user. Experimental result shows that the proposed method summaries a 2 minute-length video in about 10 seconds on a commercial smartphone. The summarization quality is superior to the commercial video editing software, Muvee.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.1
• /
• pp.82-93
• /
• 2002

The effects of the interaction between the flow and temperature field and a boundary layer due to a variety of the height of a vortex generator are experimentally investigated. The test facility consists of a boundary-layer wind tunnel with the vortex generator protruding from the bottom surface. In order to control the strength of the longitudinal vortices, the angle of attack and the spacing distance of the vortex generator are 20 degree and 40 mm, respectively. The height of the vortex generator (H) is 15 mm, 20 mm and 30 mm and the cord length of it is 50 mm. Three-component mean velocity measurements are made using a 5-hole probe system and the surface temperature distribution is measured by the hue capturing method using thermochromatic liquid crystals. By using the method mentioned above, the following conclusions are obtained from the present experiment. The boundary layer is thinned in the downwash region where the strong downflow and the lateral outflow of the boundary layer fluid occur and thickened in the upwash re,3ion where the longitudinal vortex sweeps low momentum fluid away from the bottom surface. In case that the height of the vortex generator increases, the averaged circulation and the maximum vorticity of the vortex pair decrease. The contours of the non-dimensional temperature show the similar trends fur all the cases (H=15 mm, 20 mm and 30 mm). The peak augmentation of the distribution of the local non-dimensional temperature occurs in the downwash region near the point of minimum boundary-layer thickness.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.837-843
• /
• 2006

IEEE802.15.3 and IEEE802.15.4 have defined the hybrid MAC protocols based on TDMA and CSMA where a multi-frame TDMA structure is employed so that multiple data frames can be transmitted within one timeslot to guarantee minimum delay bounds of isochroous traffic. However, TDMA has an intrinsic problem that cannot dynamically allocate optimal length of timeslot to each station. Therefore the idle timeslot can be produced by stations when each transmission queue is instantaneously empty during its timeslot, which would waste lots of timeslots especially in the multi-frame TDMA systems. In this paper, we propose a more flexible multiple-access scheme for the multi-frame TDMA system based on the concept of virtual slot which is accessible by every station with the highest priority for slot owner and lower priority for other stations. Finally, our simulation results from various environments show that proposed scheme can achieve magnitude improvement of total system throughput and average message delay by maximizing channel utilization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.6
• /
• pp.341-349
• /
• 2014

Dynamic adaptive streaming over HTTP (DASH) is the most recent and promising technology to support high quality streaming services. In dynamic adaptive streaming over HTTP (DASH), a client consecutively estimates the available network bandwidth and decides the transmission rate for the forthcoming video chunks to be downloaded. In this paper, we propose a novel rate adaptation algorithm called quality of experience QoE-enhanced adaptation algorithm over DASH (QAAD), which preserves the minimum buffer length to avoid interruption and minimizes the video quality changes during the playback. We implemented a DASH test bed and conducted extensive experiments. Experimental results demonstrate that under fluctuating network conditions, QAAD provides seamless streaming with stabilized video quality while the previous buffer-aware algorithm (i.e., QDASH[9]) frequently changes the video quality and undergoes the interruption.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.1-6
• /
• 2018

Hydro-forming technology has spread dramatically throughout automotive industry over the last 20 years. This technology has many advantages for automotive applications in terms of better structural integrity of the parts, lower cost from fewer parts, material savings, weight reduction, lower springback, improved strength, durability, and design flexibility. In this study, various simulation technologies were developed to investigate the formability of hydro-forming components. Through this technology, to establish the effective forming process for appropriate components design, the bending process, pre-forming process, die closing process, etc. were considered for good forming. This paper proposes the forming amount, section length (corresponding to the hydro-forming press capacity), and minimum curvature (curvature effect evaluation according to the hydro-forming pressure) among the considerations in the design of the hydro-forming part. In addition, a design method is proposed for hydro-forming molding by carrying out cross section analysis of a real sub-frame part for automobiles. The effects of pre-bending, axial feed, hydraulic pressure, press load, and friction among the hydro-forming process parameters were analyzed. Therefore, whether these processes are necessary factors for hydro-forming were examined.

• Development and Reproduction
• /
• v.23 no.4
• /
• pp.323-331
• /
• 2019

In this study, an experiment was conducted to investigate the annual reproductive cycle of a Korean flat bittering, Acheilognathus rhombeus, from Ogok-myeon located in Seomjin River. The reproductive cycle was examined histologically regarding water temperature and day length of the habitat, the gonadosomatic index (GSI), and developmental characteristics of female and male gonads. The maximum GSI was found to be 3.50±0.53 and 1.36±0.14 for females and males, respectively, when the water temperature and day light was 16.9℃ and 11.3 hours, respectively in October 2018. On the other hand, the minimum GSI was found to be 0.16±0.09 and 0.69±0.15 for males and females in December 2018 and February 2019, respectively. The ovipositor of females appeared from August to November 2018. We compared and calculated the stages of germ cell developmental characteristics in the testis and ovaries to determine the reproductive cycle. According to the result, we classified the female A. rhombeus reproductive cycle into four phases, which are ripe and spawning phase (October), degenerative phase (November to December), growing phase (January to March) and mature phase (April to September). The annual reproductive cycle of male A. rhombeus was categorized into four phases: mature phase (June to October), degenerative phase (November to March), resting phase (April) and growing phase (May). The Korean flat bittering is an autumn-spawner as the main spawning season in October. In male, testicular spermatogonia appeared all year-round, and the ripe and releasing phase, which is characteristics of the spawning season in other fish, did not appear.