• International Journal of Advanced Culture Technology
• /
• 제6권4호
• /
• pp.317-322
• /
• 2018

We use edge detection technique for the input image to extract the entire edges of the object in the image and then select only the edges that construct the outline of the object. By examining the positional relation between these pixels composing the outline, a simplified version of the outline of the object in the input image is generated by removing unnecessary pixels while maintaining the condition of connection of the outline. For each pixel constituting the outline, its direction is calculated by examining the positional relation with the next pixel. Then, we group the consecutive pixels with same direction into one and then change them to a line segment instead of a point. Among those line segments composing the outline of the object, a line segment whose length is smaller than a predefined minimum length of acceptable line segment is removed by merging it into one of the adjacent line segments. As a result, an outline composed of line segments of over a certain length is obtained through this process.

• 한국전문물리치료학회지
• /
• 제3권2호
• /
• pp.36-41
• /
• 1996

The purpose of this study was to determine whether the biomechanical variables of the walking patterns of the obese children compared with those of normal children would revealing significant differences. Normal(N=25) and obese(N=19) subjects were screened based on a health record which was examined to eliminate any subjects who had any pathological condition related to their gait. Data for a minimum of 5 repeated walking trials were collected using a stop watch and a tape measure. Basic kinematic analyses yielded data based on the following variables : stride length divided by leg length, and cadence divided by leg length. This measurement data was classified by the Obesity Index calculated from by height, weight data. Results showed no significant difference among normal, obese and subjects(p>.05). Difficulties in formulating the experimental condition and poor equipment quality are thought to be reason for the inconclusive results. Future studies might include medical complications such as tibia vara, genu valgum, other diseases caused by obesity.

• 한국주조공학회지
• /
• 제36권1호
• /
• pp.10-17
• /
• 2016

Numerical analysis has been performed to evaluate effect of the shape variables such as core length, slot width and slot length on misrun in aluminum die casting process for motor rotor. The predictive method for misrun in diecasting process was established by comparing the result of numerical analysis and an actual motor rotor. Solidification modulus was introduced to predict quantitatively the castability of aluminum diecasting process for motor rotor. It was found that there are minimum critical solidification modulus and slot width to prevent misrun according to core length through diecasting limit diagram proposed using the predictive method. The critical solidification modulus and slot width increase as core length increases to prevent misrun of aluminum motor rotor in diecasting process. Based on the results, the design criteria of slot shape to prevent misrun of aluminum motor rotor with various core length were established.

• 대한토목학회논문집
• /
• 제34권2호
• /
• pp.573-582
• /
• 2014

교차로에 인접한 부 도로에 대한 설치기준이 명확하지 않아 설치 및 운영에 많은 문제점을 야기시키고 있으며, 이로 인하여 교통소통과 교통안전에 문제가 발생하고 있다. 현재까지 교차로 진출입과 관련하여 운영적인 측면에서는 많은 연구가 시도되었지만, 교차로에 인접한 부 도로에 대한 연구는 대단히 미흡하고 이에 따른 합리적인 설계가 이루어지지 못하는 실정이다. 이에 본 연구에서는 교차로에 인접한 부 도로에서 진출하는 차량에 대한 행태를 조사하고, 교통소통과 안전을 고려하여 교차로에 인접한 부 도로의 적절한 이격거리를 제시하고자 한다. 교통소통과 안전을 도모할 수 있는 교차로에 인접한 부 도로의 적정길이를 제시함으로써, 향후 교차로에 인접한 부 도로와과 관련된 설치기준 정립에 이바지하고자 한다.

• 정보저장시스템학회논문집
• /
• 제1권2호
• /
• pp.150-154
• /
• 2005

The effects of track format on the inter-track crosstalk of holographic ROM system are investigated. To quantify the effect of inter-track crosstalk for various track width and pitch, we defined Signal to Crosstalk noise Ratio(SCR) as a criterion. A numerical simulation is used to obtain the SCR as a function of track widths and pitches. We compared different 4 track widths having 0.3, 0.4, 0.5, and 0.6 ${\mu}m$ considering resolving power of lens and recording density. The simulation results show that the SCRs for each track width are maximized at the track pitch which has the value of 0.72, 0.72, 0.74, and 0.5 ${\mu}m$ respectively. Next, for the three sets with track width-pitch(0.4-0.72, 0.5-0.74, 0.6-0.8 ${\mu}m$) which showed the maximum SCR, we set a minimum pit length so that all sets have a DVD equivalent data density and compared RF signals passed from the slit. The simulation results show that when the track width, pitch, and minimum pit length have 0.5, 0.74, and 0.4 ${\mu}m$ respectively, the difference between the maximum and minimum value of the RF signal showed the greatest value. Also, we investigated RF signal in case of using an amplitude inversion mask, which transmitted regions are inversed against the conventional mask. The simulation results show that the better RF signal may be obtained by using an amplitude inversion mask.

• 한국통신학회논문지
• /
• 제37권6A호
• /
• pp.438-449
• /
• 2012

본 논문에서는 다양한 CRC 코드의 성능분석을 기반으로 새로운 VHF 대역 해양 무선통신용 최적 CRC-p 코드를 제안한다. 이를 위해, 먼저 CRC 코드의 부호어 길이의 변화에 따른 미검출 오류확률과 최소해밍거리를 구하는 방법을 기술한다. 즉 순회 해밍코드나 원시 BCH 코드의 쌍대코드가 최대장 코드가 되는 것을 이용해서 천이 레지스터에 의한 간단한 회로구성으로 무게분포와 미검출 오류확률을 계산하는 방법과 MacWilliam의 항등식에 의한 최소해밍거리를 계산하는 방법을 제시한다. 다음으로 VHF 대역 해양 무선통신 시스템의 전송 프레임의 구성과 주요 통신 파라미터의 규격을 제시하고, 기존의 연구된 다양한 CRC 코드의 생성다항식을 대상으로 미검출 오류확률과 최소해밍거리의 결과를 기반으로 새로운 CRC-p 코드를 선정하고, 라이시안 해양 채널모델과 ${\pi}$/4-DQPSK 변복조기에 의한 비트오류율(BER)의 모의실험 결과를 통해 성능을 검증한다.

• 수산해양교육연구
• /
• 제21권1호
• /
• pp.52-58
• /
• 2009

항행중에 두 선박이 접근하여 충돌의 위험이 있을 경우 안전한계접근거리 즉 피항을 시작해야할 시점에 대해서 실선시험을 통한 자료에 근거를 하여 조종성지수를 산출하고 안전한계접근거리를 계산하여 제공함으로써 항행중에 선박의 조선자들이 상대선박과 피항동작을 취해야 할 경우에 경험이나 감각에만 의존함으로써 생기는 착오를 방지하고자 하였다. 앞의 논의 과정을 요약하면 다음과 같다. 1. 조우각도가 같을 경우에도 타각을 10도사용하면 타각을 30도 사용할 때보다도 안전한계접근거리는 최소 1.3배에서 최대 1.8배정도 더 증가하므로 해상상태, 자선의 적하상태를 고려해서 대타각의 전타가 어려울 경우 특히 피항개시 시점을 충분히 주의해야한다. 2. 선박의 크기에 상관없이 조우각도가 90도 부근에서 충돌의 위험이 가장 커서 안전한계접근거리는 소형선(300톤급)에서는 자선 길이의 5.0배에서, 대형선(100,000톤급)에서는 10.7배로서 대형선일수록 피항개시 시기를 놓치지 않도록 해야 한다. 3. 조우각도가 적을 경우가 클 경우보다도 안전한계접근거리가 훨씬 크게 나타났고 대형선에서 더욱 두드러지게 나타났다.

• 한국항행학회논문지
• /
• 제19권6호
• /
• pp.607-613
• /
• 2015

최근의 이동통신 트래픽의 증가 수요에 대처하기 위한 10 GHz 이상의 M/W(microwave) 이동통신용 단거리 백홀을 설계하기 위해서는 구축지점에서의 강우 페이드에 의한 감쇠와 어스 벌지 및 프레넬 존 등 지형적 대기조건을 종합적으로 고려해야 한다. 이에 본 논문에서는 국내 강우강도 표준 값을 이용하여 여러 주파수 대역에서 경로길이를 이론적으로 계산하고, SMIS (spectrum management intelligence system)를 활용한 대도심의 전파경로 프로파일을 분석한다. 이 결과를 토대로 해외의 최소 경로길이 기준과 비교분석을 행해 현재 모든 주파수에 대해 10 km로 정하고 있는 국내 기준 값을 주파수 대역별로 세분화하여 최소 경로길이를 제시한다. 본 논문의 결과는 국내 도시에서의 이동통신용 M/W 백홀 설계의 기본 데이터를 제공하여 고주파수 대역의 단거리 광대역 이동통신 백홀용으로 주파수의 유효이용을 촉진시키는데 유용하게 활용될 것이다.

• Smart Structures and Systems
• /
• 제22권1호
• /
• pp.41-55
• /
• 2018

Damping ratio and frequency have influence on dynamic serviceability or instability such as vortex-induced vibration and displacement amplification due to earthquake and critical flutter velocity, and it is thus important to make determination of damping ratio and frequency accurate. As bridges are getting longer, small scale model test considering similitude law must be conducted to evaluate damping ratio and frequency. Analysis conditions modified by similitude law are applied to experimental test considering different scale ratios. Generally, Nyquist frequency condition based on natural frequency modified by similitude law has been used to determine sampling rate for different scale ratios, and total time length has been determined by users arbitrarily or by considering similitude law with respect to time for different scale ratios. However, Nyquist frequency condition is not suitable for multimode system with noisy signals. In addition, there is no specified criteria for determination of total time length. Those analysis conditions severely affect accuracy of damping ratio. The focus of this study is made on the determination of minimum analysis conditions for different scale ratios. Influence of signal to noise ratio is studied according to the level of noise level. Free initial value problem is proposed to resolve the condition that is difficult to know original initial value for free vibration. Ambient and free vibration tests were used to analyze the dynamic properties of a system using data collected from tests with a two degree-of-freedom section model and performed on full bridge 3D models of cable stayed bridges. The free decay is estimated with the stochastic subspace identification method that uses displacement data to measure damping ratios under noisy conditions, and the iterative least squares method that adopts low pass filtering and fourth order central differencing. Reasonable results were yielded in numerical and experimental tests.

• 한국수산과학회지
• /
• 제50권4호
• /
• pp.437-446
• /
• 2017

To evaluate the consequences of possible fisheries regulations of anchovy Engraulis japonicus in the Korea Strait, we developed and applied a simulation-based yield-per-recruit (Y/R) model that considered temperature-dependent growth and size-dependent mortality, covering the egg to adult stages. We projected changes in commercial yield and egg production of anchovy with respect to varying biological reference points of 1) the instantaneous fishing mortality, 2) the minimum fork length of anchovy allowed to catch for protecting smaller anchovy ($L_{c,min}$), and 3) the maximum fork length allowed to catch for protecting bigger anchovy ($L_{c,max}$). Our Y/R model showed that the anchovy yield will be maximized at ca. $1.4{\times}10^6tons$ when $L_{c,min}$ ranges between 42-60 mm or at ca. $0.8{\times}10^6tons$ when $L_{c,max}$ ranges from 88-160 mm. At $L_{c,min}=30mm$, the present minimum length of catch, our simulations indicated that the anchovy yield can reach a maximum of $1.2{\times}10^6tons$ in the long-term when the present fishing effort, which annually yields ca. $0.2{\times}10^6tons$ of anchovy, can be increased by a factor of 28. We expect that our simulation-based Y/R model can be applied to other commercially-important small pelagic species in which the traditional Beverton-Holt Y/R model is difficult to apply.