• Journal of Radiation Protection and Research
• /
• v.49 no.2
• /
• pp.68-77
• /
• 2024

Background: Cone beam computed tomography (CBCT) is essential for correcting and verifying patient position before radiation therapy. However, it poses additional radiation exposure during CBCT scans. Therefore, this study aimed to evaluate radiological safety for the human body through dose assessment for CBCT. Materials and Methods: For CBCT dose assessment, the depth dose was evaluated using a cheese phantom, and the dose in the orbital area was evaluated using a human body phantom self-fabricated with a three-dimensional printer. Results and Discussion: The evaluation of radiation doses revealed maximum doses of 14.14 mGy and minimum doses of 6.12 mGy for pelvic imaging conditions. For chest imaging conditions, the maximum doses were 4.82 mGy, and the minimum doses were 2.35 mGy. Head imaging conditions showed maximum doses of 1.46 mGy and minimum doses of 0.39 mGy. The eyeball doses using a human body phantom model averaged at 2.11 mGy on the left and 2.19 mGy on the right. The depth dose ranged between 0.39 mGy and 14.14 mGy, depending on the change in depth for each imaging mode, and the average dose in the orbit area using a human body phantom was 2.15 mGy. Conclusion: Based on the experimental results, CBCT did not significantly affect the radiation dose. However, it is important to maintain a minimal radiation dose to optimize radiation protection following the as low as reasonable achievable principle.

• Computers and Concrete
• /
• v.8 no.4
• /
• pp.445-463
• /
• 2011

In the design of reinforced concrete (RC) beams, apart from providing adequate strength, it is also necessary to provide a minimum deformability even for beams not located in seismic regions. In most RC design codes, this is achieved by restricting the maximum tension steel ratio or neutral axis depth. However, this empirical deemed-to-satisfy method, which was developed based on beams made of normal-strength concrete (NSC) and normal-strength steel (NSS), would not provide a consistent deformability to beams made of high-strength concrete (HSC) and/or high-strength steel (HSS). More critically, HSC beams would have much lower deformability than that provided previously to NSC beams. To ensure that a consistent deformability is provided to all RC beams, it is proposed herein to set an absolute minimum rotation capacity to all RC beams in the design. Based on this requirement, the respective maximum limits of tension steel ratio and neutral axis depth for different concrete and steel yield strengths are derived based on a formula developed by the authors. Finally for incorporation into design codes, simplified guidelines for designing RC beams having the proposed minimum deformability are developed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.1
• /
• pp.8-15
• /
• 2014

In order to evaluating physiochemical properties of soil under minimum tillage and direct seeding cultivation on dry rice paddy, we conducted to analyze the soil physiochemical characteristics in treatment with 2-year minimum tillage and dry direct seeding (2MT), 3-year minimum tillage and dry direct seeding (3MT), and tillage transplanting cultivation (TT). As results of analyzing soil organic matter (OM) contents with 2 cm soil depth of interval from surface to 30 cm, OM contents with surface soil from 0 to 2MT and 3MT were higher than TT, recorded 34.6, 28.1 and $19.8gkg^{-1}$, respectively. But until 20cm in soil depth, it was not so large on the deviation of OM contents among the 3 treatments comparing with 2cm surface. Beneath 20 cm in soil depths, 2- and 3-year, OM contents in TT were distributed to be lower than 2MT and 3MT. The contents of total nitrogen in 2MT and 3MT were higher than the content in TT across the soil profile. Consequently, though minimum tillage and direct seeding farming is obviously the practice to saving of machinery work and labor, other practices such as continuously input OM should be needed to achieve carbon sequestration goal through minimum tillage and direct seeding on dry paddy.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.991-1000
• /
• 2000

Previous area-based stereo matching algorithms find the disparity by first computing the sum of squared differences (SSD) between corresponding points using a rectangular window, and then searching the position of the minimum SSD within the disparity range. These algorithms generate relatively many matching errors around depth discontinuities, since the SSD function may fail to search for the minimum because of varying disparity profiles in such areas. In this paper, in order to improve the matching accuracy around the depth discontinuities, a new correlation function based on robust estimation technique is proposed for stereo matching. In addition, while previous stereo algorithms utilize a single rectangular window for computing the correlation function, the proposed matching algorithm utilizes 4-directional line masks additionally to reduce the matching errors further. It has been turned out that the proposed algorithm reduces matching errors around depth discontinuities significantly. Experimental results are presented in this paper, comparing the performance of the proposed technique with those of previous algorithms using both synthetic and real images.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.9
• /
• pp.1395-1403
• /
• 1993

Protocol conformance is crucial to inter-operability and cost effective computer communication. Given a protocol specification, the task of checking whether an inplementation conforms to the specification is called conformance testing. The efficiency and fault coverage of conformance testing are largely dependent on how test cases are chosen. Some states may have more one UIO sequence when the protocol is represented by FSM (Finite State Machine). The length of test sequence can be minimized if the optimal test sequences are chosen. In this paper, we construct the depth-tree to find the maximum overlapping among the test sequence. By using the resulting depth-tree, we generate the minimum-length test sequence. We show the example of the minimum-length test sequence obtained by using the resulting depth-tree.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.7
• /
• pp.131-140
• /
• 2014

In this paper, we present an efficient implementation of Kruskal's algorithm to obtain a minimum spanning tree. The proposed method utilizes the union-find data structure, reducing the depth of the tree of the node set by making the nodes in the path to root be the child node of the root of combined tree. This method can reduce the depth of the tree by shortening the path to the root and lowering the level of the node. This is an efficient method because if the tree's depth reduces, it could shorten the time of finding the root of the tree to which the node belongs. The performance of the proposed method is evaluated through the graphs generated randomly. The results showed that the proposed method outperformed the conventional method in terms of the depth of the tree.

• Korean Journal of Microbiology
• /
• v.34 no.3
• /
• pp.144-148
• /
• 1998

Soil microorganisms including bacteria, fungi, and actinomycetes were seasonally isolated at depths (0.5~2, $10{\pm}1$, $50{\pm}1cm$) of field. The frequency of microbial isolates was employed for the determination of microbial population (CFU/g dry soil) and distribution ratio (%) in soil. Both bacteria (24-fold) and actinomycetes (7-fold) exhibited the biggest change at the depth of $50{\pm}1cm$, whereas fungi showed the maximum (13-fold) at $10{\pm}1cm$. On the whole, the bacterial population was high in spring soil, fungi in winter, and actinomycetes in autumn. Soil microorganisms also exhibited the seasonal variation on their distribution ratio (%). The maximum distribution ratio (85.7%) of bacteria was observed at the depth of $50{\pm}1cm$ in spring, whereas bacteria showed the minimum (35.2%) at the depth of $10{\pm}1cm$ in spring. The maximum distribution ratio (23.0%) of fungi was found at the depth of $50{\pm}1cm$ in spring, whereas its minimum (0.5%) at the depth of $10{\pm}1cm$ in spring. Actinomycetes exhibited the maximum distribution ratio (45.2%) at the depth of $10{\pm}1cm$ in spring, whereas its minimum (12.2%) was showed at the depth of $50{\pm}1cm$ in spring.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.71-82
• /
• 2018

This study presents a reasonable and economical DCM reinforcement length for the various factors (the embankment height, the distance from the embankment to the underground structure, the depth of the soft ground, and the compression index and the swelling index of the soft ground) that affect the stability of the structure due to lateral movement. Based on these results, we analyzed each factor's degree of influence and figured out which factor influenced the lateral movement most. The cross section of the embankment on the soft ground was modeled by using the Finite Element Program and reinforced with DCM. The results show that the increase rate of the reinforcement length with the increase of the embankment height is about 9~50%, the increase rate of the reinforcement length with the depth of soft ground is about 13~30%, and the increase rate of the reinforcement length with increasing compression index is about 3~25%. In addition, the influence of each factor on each other was analyzed. As a result, among the separation distance, the compressive index and the maximum to minimum slope ratio of the reinforcement length of the embankment height, the separation distance was the largest for the depth of soft ground. As the depth of the soft ground increases, the ratio of the maximum to minimum slope of the reinforcement length according to the embankment height is 3.75, the ratio of the maximum to minimum slope of the reinforcement length according to the spacing distance is 4.3, and the ratio of maximum to minimum slope according to compression index is 2.5. From these results, it is confirmed that the three factors are greatly affected by the depth of soft ground.

• Land and Housing Review
• /
• v.6 no.4
• /
• pp.221-229
• /
• 2015

Large trees in the apartment complex are playing an important role to decide the quality of external environment. They are planted with the object of utilizing themselves as a landmark of the complex and enhancing space symbolism. Since planting large trees would require high maintenance costs and generate defect, it would cause decline in quality of external environment. This study researches on large trees in artificial ground of the apartment complex. This study analyzes actual condition of planting and tries to provide improvement direction of planting. In order to conduct this research, three target areas (over R30) and 265 trees are selected. Based on the drawings and specifications this study researches on the plan of landscape design, changes of field design, actual condition of completion, present condition of planting, minimum soil depth of growth and development and types of extra action for soil depth. The result shows that 85% of drawings and specifications for large trees in the apartment complex are deep-rooted tree species. On average large trees with R 35 are planted in artificial ground and there is lack of on average 65cm minimum soil depth of growth and development. Reviewing changes of field design is conducted in such limited size as mainly R30 and R40 and there is no extra plan for lack of soil depth. The plan for securing additional soil depth is done by 85% of mounding. However, since there is only 10% of satisfaction, the inappropriateness in securing additional soil is pointed out. This research also points out that the size of large trees, root characteristics and location-allocation for planting are pivotal factors for securing minimum soil depth of growth and development. This research also provides improvement direction in case of planning planting.

• Journal of Astronomy and Space Sciences
• /
• v.36 no.4
• /
• pp.225-234
• /
• 2019

We explore the associations between the total sunspot area, solar north-south asymmetry, and Southern Oscillation Index and the physical characteristics of clouds by calculating normalized cross-correlations, motivated by the idea that the galactic cosmic ray influx modulated by solar activity may cause changes in cloud coverage, and in turn the Earth's climate. Unlike previous studies based on the relative difference, we have employed cloud data as a whole time-series without detrending. We found that the coverage of high-level and low-level cloud is at a maximum when the solar north-south asymmetry is close to the minimum, and one or two years after the solar north-south asymmetry is at a maximum, respectively. The global surface air temperature is at a maximum five years after the solar north-south asymmetry is at a maximum, and the optical depth is at a minimum when the solar north-south asymmetry is at a maximum. We also found that during the descending period of solar activity, the coverage of low-level cloud is at a maximum, and global surface air temperature and cloud optical depth are at a minimum, and that the total column water vapor is at a maximum one or two years after the solar maximum.