• 산업공학
• /
• 제17권1호
• /
• pp.128-141
• /
• 2004

Although a number of container terminal simulators have been developed for various purposes, none of the existing simulators allow the system structure to reuse the system structure depending on application. Our goal is to develop highly reusable, highly inter-operable and flexible container terminal simulation system. The High Level Architecture(HLA) is an architecture for reuse and inter-operation of simulation. It is based on premise that no simulation can satisfy all use and users. An individual simulation or set of simulations developed for one purpose can be applied to another application under the HLA concept of the federation : a composable set of interacting simulations. The intent of the HLA is a structure which will support reuse of capabilities available in different simulations, ultimately reducing the cost and time required to create a synthetic environment for a new purpose, and the possibility of distributed collaborative development of complex simulation applications. In this paper, we discuss the design of a HLA-based port container terminal simulation system. Furthermore, we describe various technical motivations for HLA, the key elements of the architecture and how they are minimum and essential to the goal of reuse and interoperability.

• Advances in Energy Research
• /
• 제4권1호
• /
• pp.87-106
• /
• 2016

In this research, optimum design of the combined solar collector, geothermal heat pump and thermal seasonal storage system for heating and cooling a sample greenhouse is studied. In order to optimize the system from technical point of view some new control strategies and functions resulting from important TRNSYS output diagrams are presented. Temperatures of ground, rock bed storage, outlet ground heat exchanger fluid and entering fluid to the evaporator specify our strategies. Optimal heat storage is done with maximum efficiency and minimum loss. Mean seasonal heating and cooling COPs of 4.92 and 7.14 are achieved in series mode as there is no need to start the heat pump sometimes. Furthermore, optimal parallel operation of the storage and the heat pump is studied by applying the same control strategies. Although the aforementioned system has higher mean seasonal heating and cooling COPs (4.96 and 7.18 respectively) and lower initial cost, it requires higher amounts of auxiliary energy either. Soil temperature around ground heat exchanger will also increase up to $1.5^{\circ}C$ after 2 years of operation as a result of seasonal storage. At the end, the optimum combined system is chosen by trade-off between technical and economic issues.

• Journal of Communications and Networks
• /
• 제15권5호
• /
• pp.496-503
• /
• 2013

In an orthogonal frequency division multiplexing system, conventional interpolation techniques cannot correctly balance performance and overhead when estimating dynamic long-delay channels in single frequency networks (SFNs). In this study, classical filter analysis and design methods are employed to derive a complex interpolator for maximizing the resistible echo delay in a channel estimator on the basis of the correlation between frequency domain interpolating and time domain windowing. The coefficient computation of the complex interpolator requires a key parameter, i.e., channel length, which is obtained in the frequency domain with a tentative estimation scheme having low implementation complexity. The proposed complex adaptive interpolator is verified in a simulated digital video broadcasting for terrestrial/handheld receiver. The simulation results indicate that the designed channel estimator can not only handle SFN echoes with more than $200{\mu}s$ delay but also achieve a bit-error rate performance close to the optimum minimum mean square error method, which significantly outperforms conventional channel estimation methods, while preserving a low implementation cost in a short-delay channel.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1062-1065
• /
• 2002

We demonstrate the MMIC(monolithic microwave integrated circuit) frequency doublers generating stable and low-cost 29 ㎓ local oscillator signals from 14.5 ㎓ input signals. These devices were designed and fabricated by using the MMIC integration process of 0.1 $\mu\textrm{m}$ gate-length PHEMTs (pseudomorphic high electron mobility transistors). The measurements showed S$\_$11/ of -9.2 dB at 14.5 ㎓, S/sub22/ of -18.6 dB at 29 ㎓ and a minimum conversion loss of 18.2 dB at 14.5 ㎓ with an input power of 6 dBm. The fundamental signal of 14.5㎓ was suppressed below 15.2 dBc compared with the second harmonic signal at the output port, and the isolation characteristics of the fundamental signal between the input and the output port were maintained above 30 dB in the frequency range of 10.5 ㎓ to 18.5 ㎓.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2006년도 춘계공동학술대회 논문집
• /
• pp.1616-1640
• /
• 2006

In this paper, we deal with a network optimization problem arising from the deployment of Ethernet-based BcN access network. BcN convergence services require that access networks satisfy QoS measures. BcN services have two types of traffics: stream traffic and elastic traffic. Stream traffic uses blocking probability as a QoS measure, while elastic traffic uses delay factor as a QoS measure. Incorporating the QoS requirements, we formulate the problem as a nonlinear mixed-integer programming model. The proposed model seeks to find a minimum cost dimensioning solution, while satisfying the QoS requirement. We propose tabu search heuristic algorithms for solving the problem, and simulate tabu result. We demonstrate the computational efficacy of the proposed algorithm by solving a network design problem.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권2호
• /
• pp.289-295
• /
• 2010

플락스틱 재료를 사용한 가공법 중에서 가장 보편적인 가공법이 사출성형이다. 플라스틱 재료의 활용도는 지속적으로 증가하고 있으며, 신소재 등의 개발로 그 적용범위 또한 확대되고 있다. 사출성형에서 수축현상은 수지의 종류, 즉 결정성 수지인지 비결정성 수지인지에 따라 크게 다르게 나타나며 사출성형시의 운전조건에 따라서도 다르다. 본 연구에서는 Al합금으로 제작되고 있는 인라인 스케이트의 프레임을 플라스틱 재료로 대체하기 위한 최적화 공정에 관한 것이다. 금형설계 전 해석을 통하여 성형공정이 최소화되는 런너와 게이트의 치수와 형상을 결정하겠다. 런너와 게이트의 치수 변화에 따른 제품의 사출성형성을 알아보겠다. 본 연구의 시뮬레이션에서는 사출성형해석용 소프트웨어인 Moldflow를 이용해서 해석을 수행하였다.

• 한국항공우주학회지
• /
• 제39권6호
• /
• pp.543-552
• /
• 2011

가장 효과적인 모멘텀 교환장치인 CMG(Control Moment Gyro)는 고기동성이 요구되는 위성에 필수적이다. 본 논문에서는 고기동성이 요구되는 소형 인공위성을 위한 Single-Gimbal CMG(SGCMG)에 대한 하드웨어 개발에 필요한 동역학식을 정리하였으며 이를 사용하여 CMG 설계에 필요한 요구사항이 도출되었다. 또한 도출된 요구사항에 따라 출력토크가 1.2Nm인 소형 CMG 성능검증 모델이 제작되었으며, 에러분석 및 성능시험이 수행되었다. 최대 출력토크, 김벌 과도응답특성, 최소 출력토크, 출력토크오차, 김벌 각속도 오차 등을 성능시험 항목으로 선정하어 실험 측정하였고, 시험 결과를 통해 설계 결과를 검증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.193-197
• /
• 2002

In this study, the casting/forging process was applied to the Shift-Fork, a manual transmission part of automobiles. In the casting experiments, the effects of additives, Sr, Ti＋B and Mg, on the mechanical properties and the microstructure of a cast preform were investigated. When 0.03% Sr were added into the molten aluminum alloy, the finest silicon-structure was observed in the cast preform and the highest tensile strength and elongation accomplished. And when 0.2% Ti＋B were added into the molten Al-Si alloy, the highest values of tensile strength were obtained. The maximum hardness was in case of 0.2% Mg. In the forging experiment, it was confirmed that the optimal configuration of the cast preform could be predicted by FE analysis. To minimize the cost as the press size, the compact shape of preform was proposed to reduce the volume of flash. The modification of shape in designing preform was performed to attain a satisfactory performance in the areas where the mechanical strength were more required. By using FVM(Finite Volume Method) software, it was verified that a proposed casting design was available. To identify the relationship between effective strain and mechanical properties of the final forged product, the compression test was performed. As the result, the tensile strength and elongation of a cast preform were much higher than before forging. The minimum forging temperature was found 40$0^{\circ}C$ to save heating time.

• 조명전기설비학회논문지
• /
• 제15권4호
• /
• pp.1-6
• /
• 2001

본 논문에서는 태양광 채광시스템의 출력광의 스펙트럼을 분석하였으며, 그 결과 태양광이 갖는 자외선 분포 보다 낮음을 알 수 있었다. 또한, 출력단의 조명환경을 조명설계 프로그램을 이용하여 6$\times$6$\times$2.3[m]인 최소작업 공간의 조명 환경을 예측하였으며, 광파이버 조명시스템의 출력단의 높이를 1.3[m]에 위치하였을 경우 50$\times$50[cm]의 면적에서 500[lx] 이상의 조도값을 얻을 수 있었다. 이와 같이, 시스템의 가격문제를 개선한다면 실내 조명광 원으로서 가능하리라 본다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.183-188
• /
• 2002

In locations where the cost or concrete is relatively high, or in situations where the weight or concrete members is to be kept to a minimum, it may be economical to use hollow reinforced concrete vertical members. Hollow reinforced concrete columns with low axial load, moderate longitudinal steel percentage, and a reasonably thick wall were found to perform in a ductile manner at the flexural strength, similar to solid columns. However, hollow reinforced concrete columns with high axial load, high longitudinal steel percentage, and a thin wall were found to behave in a brittle manner at the flexural strength, since the neutral axis is forced to occur away from the inside face of the tube towards the section centroid and, as a result, crushing of concrete occurs near the unconfined inside face of the section. If, however, a steel tube is placed near the inside face of a circular hollow column, the column can be expected not to fail in a brittle manner by disintegration of the concrete in the compression zone. Design recommendation and example by moment-curvature analysis program for curvature ductility are presented. Theoretical moment-curvature analysis for reinforced concrete columns, indicating the available flexural strength and ductility, can be conducted providing the stress-strain relation for the concrete and steel are known. In this paper, a unified stress-stain model for confined concrete by Mander is developed for members with circular sections.