• 산업공학
• /
• 제10권3호
• /
• pp.179-187
• /
• 1997

The efficiency of material flow systems in terms of optimal network flow and minimum cost flow has always been an important design and operational goal in material handling and distribution system. In this research, an attempt was made to develop a new algorithm and the model to solve a stochastic material flow network with bidirectional and uncertain flows. A stochastic material flow network with bidirectional flows can be considered from a finite set with unknown demand probabilities of each node. This problem can be formulated as a special case of a two-stage linear programming problem which can be converted into an equivalent linear program. To find the optimal solution of proposed stochastic material flow network, some terminologies and algorithms together with theories are developed based on the partitioning and subgradient techniques. A computer program applying the proposed method was developed and was applied to various problems.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.149-150
• /
• 2019

Recently, major public owner and general contractors in Korea are actively preparing and improving BIM manuals and guidelines to effectively apply BIM technology in construction projects. These guideline has a purpose to define the scope of the applying BIM technology to each construction phase and to explain the minimum technology guidance required for the initial stage. In situations where BIM data are to be submitted within a limited time and cost at the design stage, a BIM data preparing process should be carried out in advance to meet the BIM interoperability between the pre and post of construction precess. In this research, we propose the scope of the BIM guidelines to meet and to be considered for the BIM based review of constructability and economic evaluation of Apartment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.323-325
• /
• 1996

The design of Intelligent Energy Saving Power System Controller (IESPSC) for Telecom DC power plants is proposed and presented in this paper. From the past experience. rectifiers for Telecom DC power plants have been operated inefficiently at light loads. IESPSC offers "novel load sharing" approach based on the knowledge of each unit's efficiency of paralleled rectifiers. Neural networks is used for identifying each rectifier's efficiency characteristic curve corresponding to load currents, which is in turn utilized to produce a system efficiency close to the maximum under all operating conditions. In addition, by limiting the number of operating units to the minimum while maintaining high efficiency at the determined loads, a drastic savings in operating cost can be achieved.

• Industrial Engineering and Management Systems
• /
• 제2권1호
• /
• pp.28-34
• /
• 2003

The fundamental design issues that arise in the pickup and delivery system planning are optimizing the system with minimum cost and maximum throughput and service level. This study is concerned with the development of pickup and delivery system with customer responsive service level, DCM(Demand Chain Management). The distribution process and service map are consisted of manufacturing, warehousing, and pickup and delivery. First we formulated the vehicle pickup and delivery problem using GIS-VRP method so as to satisfy the customer service requests. Second, we developed a GUI-type computer program using AVL, automated vehicle location system. The computational results show that the proposed method is very effective on a set of test problems.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.674-680
• /
• 2023

The brine and seawater are important and largely untapped sources of critical trace metals and elements. The coupling of selective recovery of trace metals from seawater/brine with desalination plants gives an added advantage of energy credits to desalination plants and as well as reduce the cost of desalinated water. In this paper, status review on recovery of important trace metals and other alkali metals from seawater is presented. The potential of Indian desalination plants for recovery of trace metals, based on recovery ratio of 0.35 is also highlighted. Studies carried out by the process based on adsorption using Radiation Induced Grafted (RIG) polymeric adsorbents and then fractional elutions are presented. The fouling factors due to bio fouling and dirt fouling have been estimated for various locations of interest through field trails. The pay loader in the form of compact Contactor Assembly with minimum pressure drop, for loading specially designed radiation grafted sorbent in leaflet form has been briefed, as required for plant scale facility. The typical conceptual process design details of farm assembly of project CRUDE are described.

• 한국도로학회논문집
• /
• 제12권4호
• /
• pp.39-46
• /
• 2010

2007년부터 아이오와 주 교통국에서는 고속도로와 국도에서 FWD 장비를 이용하여 네트워크 레벨에 필요한 조사를 실시하였고 처짐 자료와 포장 구조분석 결과를 데이터베이스로 구축하는 작업을 시작하였다. 축적된 데이터베이스에 정보는 포장에 구조적 문제점을 발견하고 포장에 잔류 공용수명을 예측하여 포장에 유지보수 시점을 결정하는데 사용한다. 현재 아이오와 주 교통국에서 사용하고 있는 FWD 네트워크 레벨 조사 프로토콜은 포장 표면에 3번에 하중을 각각 재하하여 8개에 지오폰으로부터 측정한 처짐량을 이용, 역 계산을 통해 포장구조 해석을 수행하고 있으며 조사지점 수는 조사하는 도로의 구간 길이에 따라 결정하고 있다. 그러나, 현재 사용하고 있은 FWD 네트워크 레벨 조사 프로토콜은 1년 동안 아이오와 주 전체 도로 네트워크에 약 20%만을 조사할 수 있는 것으로 나타났다. 따라서, 해마다 아이오와 주 도로 네트워크에 20% 이상을 조사하기 위해서는 현재 사용하고 있는 FWD 네트워크 레벨 조사 프로토콜을 간소화해야 할 필요가 있다. 본 연구에 목적은 현재 사용하고 있는 FWD 네트워크 레벨 조사 프로토콜에서 FWD 측정 데이터에 영향을 미치지 않는 범위내에서 최소 하중 재하 수와 조사지점 수를 결정하기 위한 것이다. 83개에 합성포장 구간을 대상으로 측정한 FWD 네트워크 레벨 조사에서는 FWD 네트워크 레벨 조사 프로토콜에서 하중 재하 수와 조사지점 수를 줄여도 포장 구조해석 결과에는 크게 영향을 미치지 않는 것으로 나타났다. 간소화된 FWD 네트워크 레벨 조사 프로토콜은 FWD 측정 결과에 영향을 미치지 않으면서 측정 조사율을 높일 수 있을 뿐만 아니라 교통 통제로 인한 간접비용도 절감시킬 수 있을 것으로 기대하고 있다.

• 한국콘텐츠학회논문지
• /
• 제11권12호
• /
• pp.919-930
• /
• 2011

도로는 사회간접자본 중 하나로서 지속적으로 관리되어야 그 기능을 발휘할 수 있는 국가의 중요한 자산이다. 지금까지는 도로를 포장관리시스템이라는 체계로 관리하여 왔다. 이 포장관리시스템은 시설물유지관리차원에서 사회기반시설을 관리하는 것으로서 주로 관리자 관점에서 공학적 판단을 기준으로 최소의 비용으로 공용수명을 최대화하는 모델이다. 그러나 경제발전으로 국민의 소득수준이 올라감에 따라 삶의 질에 대한 요구도 증가하고 있어 이제는 납세자로서 국민의 동의는 국가의 정책을 결정하는데 중요한 변수로 작용하기 시작했다. 따라서 사용자 관점의 평가는 이러한 요구를 해결하는 출발점이 되었다. 이런 관점으로 평가하기 위한 척도로서 서비스 수준(Level of Service: LoS) 이라는 것이 사용되기 시작했으며, 이를 시설물 자산관리에 활용하려는 여러 가지 시도가 있다. 본 논문에서는 LoS를 척도로 활용하는 한국형통합 자산관리체계(Korea Total Asset Management-40: KTAM-40)를 적용한 도로포장자산관리시스템의 정보기술아키텍처 중에 응용아키텍처와 데이터아키텍처를 설계하고 이것이 KTAM-40의 요구조건을 충족시키는지를 밝히고자 한다.

• Geomechanics and Engineering
• /
• 제10권6호
• /
• pp.737-755
• /
• 2016

The load transfer depth of a ground anchor is the minimum length required to transfer the initial prestressing to the grout column through the bonded part. A thorough understanding of the mechanism of load transfer as well as accurate prediction of the load transfer depth are essential for designing an anchorage that has an adequate factor of safety and satisfies implicit economic criteria. In the current research, experimental and numerical studies were conducted to investigate the load transfer mechanism of ground anchors based on a series of laboratory and field load tests. Optical FBG sensors embedded in the central king cable of a seven-wire strand were successfully employed to monitor the changes in tensile force and its distribution along the tendons. Moreover, results from laboratory and in-situ pullout tests were compared with those from equivalent case studies simulated using the finite difference method in the FLAC 3D program. All the results obtained from the two proposed methods were remarkably consistent with respect to the load increments. They were similar not only in trend but also in magnitude and showed more consistency at higher pullout loading stages, especially the final loading stage. Furthermore, the estimated load transfer depth demonstrated a pronounced dependency on the surrounding ground condition, being shorter in hard ground conditions and longer in weaker ones. Finally, considering the safety factor and cost-effective design, the required bonded length of a ground anchor was formulated in terms of the load transfer depth.

• Architectural research
• /
• 제25권1호
• /
• pp.1-9
• /
• 2023

Structural ageing influences the structural performance in a negative way by reducing the seismic resilience of the structure which makes it a major concern around the world. Retrofitting is considered to be a pragmatic and feasible solution to address this issue. Numerous retrofitting techniques are devised by researchers over the years. The viability of using steel bracings as retrofitting component is evaluated on a G+30 storied building model designed according to ACI318-14 and ASCE 7-16. Four different types of steel bracing arrangements (V, Inverted V/ Chevron, Cross/ X, Diagonal) are assessed in the model developed in commercial nu-merical analysis software while considering both material and geometric nonlinearities. Reducing displacement and cost in the structures indicates that the design is safe and economical. Therefore, the purpose of this article is to find the best bracing system that causes minimum displacement, which indicates maximum lateral stiffness. To evaluate the seismic vulnerability of each system, incremental dynamic analysis was conducted to develop fragility curves, followed by the formation of collapse margin ratio (CMR) as stipulated in FEMA P695 and finally, a cost estimation was made for each system. The outcomes revealed that the effects of ge-ometric nonlinearity tend to evoke hazardous consequences if not considered in the structural design. Probabilistic seismic and economic probes indicated the superior performance of V braced frame system and its competency to be a germane technique for retrofitting.

• 한국정보통신학회논문지
• /
• 제26권12호
• /
• pp.1890-1897
• /
• 2022

본 논문에서는 수중글라이더용 항법필터 설계를 수행한다. 해양의 염분, 수온 등 해양 정보 획득을 위해서 사용되는 수중글라이더는 저전력으로 장기간 운용이 되기 때문에, 다양한 센서를 적용하기에 많은 제약이 있다. 제한된 수중글라이더의 운용 특성을 고려하여 센서 구성이 다른 두 종류의 위치 추정을 위한 항법 필터를 설계한다. 항법필터는 최소한의 센서출력 정보를 바탕으로 수중글라이더의 동체좌표계 기준 속도를 추정한다. 첫 번째 필터의 센서 구성은 가속도계, 지자계, 심도계 센서로 구성 되어있고, 두 번째 필터는 첫 번째 필터와 동일한 구성에 자이로 센서가 추가된다. 추정된 속도는 자세정보와 융합하여 항법좌표계의 속도정보로 변환 뒤 최종적으로 위치를 추정한다. 제안된 필터의 성능을 분석하기 위해 단일 시뮬레이션 및 몬테카를로 수치해석 기법을 이용하여 분석을 수행하고 수행결과는 표준편차(standard deviation, 1σ)로 분석한다. 각 필터의 위치오차에 대한 표준편차는 334.34, 125.91m이다.