• Journal of the korean academy of Pediatric Dentistry
• /
• v.21 no.2
• /
• pp.510-517
• /
• 1994

It is a relatively common clinical experience to see a impacted maxillary central incisor. This is apparent at the dental age of about eight years and over, when the patient is in the early mixed dentition stage. The adjacent teeth may tilt toward the site of the missing tooth with resulting space closure and midline deviation. Most often, the central incisor is impacted labially. The labial impaction has been indicated as the most difficult to manage. Each of the current articles describing labial impactions shows at least one case with mucogingival recession or a minimal zone of attached gingiva. This report described the surgical uncovering and orthodontic-physiologic positioning methods with labially impacted maxillary central incisors. Through surgical exposure and direct bonding of lingual botton, the central incisors were brought into proper eruption path with elastic traction. The case 1 and 2 were treated with the physiologic erupting forces. The case 3 was applied with continuous orthodontic force. The case 1 and 2 resulted in good positioning, good esthetics and adequate width of keratinised gingiva. The case 3 resulted in local inflammation and inadequate width of keratinised gingiva.

• Korean Journal of Microbiology
• /
• v.30 no.3
• /
• pp.199-206
• /
• 1992

Six isolated strains degrading aniline were selected, identified and designated as pseudomonas putida K6, Pseudomonas acidovorans K82, Achromobacter gr. D. V. K24, Achromobacter xylosocidans K4, Moraxella sp. K21 and Moraxella sp. K22. All of them degraded 1000 ppm aniline completely within 30 to 36 hours. Most of these strains are resistant to antibiotics more than one, but Moraxella sp. has not any antibiotic marker tested. Most strains except for P. acidovorans K82 were shown to have resistance to the heavy metal ions such as Ni, Cu, Li, Ba, Co, etc. but not to Hg to which only P. putida K6 was resistant. M. sp. K21 was capable of degrading aniline to a maximum concentration of 2500 ppm without any repression. The incubation of the cell in limited pH ranges (4-8) had no great effect on aniline degradation. The addition of bactopeptone to the minimal media promoted the speed of aniline degradation, but the addition of glucose rather repressed the rate of aniline degradation. Through enzyme assay, A. gr. D. V. K 24 was shown to degrade aniline through artho-pathway and formed .betha.-ketoadipate as intermediate metabolite.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.171-192
• /
• 2017

The change of any element in the network is possible to cause performance degradation of the multicast network. So it is necessary to optimize the topology path through the multicast update strategy, which directly affects the performance and user experience of the overlay multicast. In view of the above, a new multicast tree update strategy based on perturbation theory Musp (Multicast Update Strategy based on Perturbation theory) is proposed, which reduces the data transmission interruption caused by the multicast tree update and improves user experiences. According to the multicast tree's elements performance and the topology structure, the Musp strategy defines the multicast metric matrix and based on the matrix perturbation theory it also defines the multicast fluctuation factor. Besides it also demonstrates the calculability of the multicast fluctuation factor presents the steps of the Musp algorithm and calculates the complexity. The experimental results show that compared with other update strategies, as for the sensitivity of the multicast fluctuation factor's energized multicast tree to the network disturbance, the maximum delay of the Musp update strategy is minimal in the case of the local degradation of network performance.

• Computational Structural Engineering
• /
• v.9 no.3
• /
• pp.145-155
• /
• 1996

This paper suggests a new algorithm of automatic mesh generation over planar domains with arbitrarily shaped boundaries and control curves. The algorithm is based on the method of recursively subdividing the domain by the path connecting, with minimum penalty value, two points on the super-loop, which consists of the boundaries and the control curves, The algorithm is not subject to any limitation on the shape of the domain, and its process can be fully automated. Therefore, this algorithm can be implemented into computer programs which require minimal user intervention while generating finite element meshes over complicated domains. This algorithm can also be easily extended for application to the generation of meshes over curved surfaces, or to the adaptive mesh generation.

• Nuclear Engineering and Technology
• /
• v.50 no.8
• /
• pp.1364-1371
• /
• 2018

An extensive investigation of photon interaction properties has been made for $Zn_xTe_{100-x}$ alloys (where x = 5, 20, 30, 40, 50) to explore its possible use in sensing and shielding gamma radiations. The results show better and stable response of ZnTe alloys for various photon interaction properties over the wide energy range, with an additional benefit of ease in fabrication due to lower melting points of Zn and Te. Mass attenuation coefficient values show strong dependence on photon energy as well as composition. Effective atomic number has maximum value for $Zn_5Te_{95}$ and lowest for $Zn_{50}Te_{50}$ in the entire energy region. The alloy sample with maximum $Z_{eff}$ shows minimal value of $N_e$ and vice versa. Mean free path follows inverse trend as observed for mass attenuation coefficient. The exposure and energy absorption buildup factors depend upon photon energy, penetration thickness and composition (effective atomic number) of $Zn_xTe_{100-x}$ alloys. It finds its application for sensing and shielding from highly energetic and highly penetrating photons at sites where radioactive materials were used and visibility of material is not a big constraint. Further, energy down conversion property of ZnTe alloys with subsequent emission in green band suggests its potential use in sensing gamma photons.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.2
• /
• pp.105-111
• /
• 2005

Though GF(2) CA can only handle data with bit units GF(2p) CA can handle data with units more than bit units. In this paper we analyze the state-transition of nongroup cellular automata(CA) with a single attractor over GF(2p). And we propose the constructing method the state-transition diagram of a linear SACA over GF(2p) by using the concept of basic path. Also we propose the state-transition diagram of the nonlinear complemented SACA by using the state-transition diagram of a linear SACA.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.109-117
• /
• 2014

In navigation route planning systems using A* algorithms, the cardinality of an Open list, which is a list of candidate nodes through which a terminal node can be accessed, increases as the path length increases. In this paper, a method of alternately utilizing the Dijkstra's algorithm and the A* algorithm to reduce the cardinality of the Open list is investigated. In particular, by employing a depth parameter, named Level, the two algorithms are alternately performed depending on the Level's value. Using the hybrid searching approach, the Open list constructed in the Dijkstra's algorithm is transferred into the Open list of the A* algorithm, and consequently, the unconstricted increase of the cardinality of the Open list of the former algorithm can be avoided and controlled appropriately. In addition, an optimal or nearly optimal path similar to the Dijkstra's route, but not available in the A* algorithm, can be found. The experimental results, obtained with synthetic and real-life benchmark data, demonstrate that the computational cost, measured with the number of nodes to be compared, was remarkably reduced compared to the traditional searching algorithms, while maintaining the similar distance to those of the latter algorithms. Here, the values of Level were empirically selected. Thus, a study on finding the optimal Level values, while taking into consideration the actual road conditions remains open.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.3
• /
• pp.516-522
• /
• 2008

In the case of the impacted teeth, the clinician has to consider development of tooth, site of impaction, eruption path, and cooperation of patient. If there are genetic or general factors to effect the eruption of tooth, the clinician treats these first and then takes the early treatment for eruption guidance. If there are physical factors to intercept eruption, the clinician put them off first. However, if there are no factors to effect eruption of tooth and enough space for eruption, the clinician can consider extraction of deciduous teeth, forced eruption and surgical reposition. In case of surgical repositioning, proper time for root development, proper socket formation, and minimal trauma are important for success. This case presents displaced impacted maxillary central incisor with dilacerated root. The development of root is Nolla's stage 7, and the tooth was treated by surgical repositioning. We can observe no root resorption and good healing pattern.

• International Journal of Highway Engineering
• /
• v.5 no.2 s.16
• /
• pp.15-24
• /
• 2003

The performance of waterproofing system (WPS) is known to be a function of many complex interaction of material factors, design details, and the quality of construction, but it is mainly determined by the bond strength, which is measured by tensile adhesive strength (TAS) test. to the concrete bridge deck. In this research, eight waterproofing membranes were selected from commercial market and the tensile adhesive characteristics of the WPS on concrete bridge deck were investigated in view of various factor in asphalt pavement. The factors include type of asphalt mixture, pavement thickness, paving temperature and influence of wheel loading. TAS test of different asphalt pavement types showed that TAS of WPS under SMA (Stone Mastic Asphalt) pavement was greater than that under dense asphalt pavement. TAS of sheet membranes was improved as the compaction temperature of asphalt concrete increase, but TAS of liquid membranes were not. The influence of thickness of pavement val minimal with given laboratory test condition. TAS of sheet membranes after wheel tracking test were in the order of the sites under wheel path (UWP), before wheel tracking (BWT) and nearby wheel path (NWP). Since TAS of the same WPS of UWP was higher than TAS of BWT, wheel loading had function of pressing WPS resulting in higher adhesive strength. But liquid membranes were variable on types. The feature of detached interface after TAS test showed that sheet types were all detached in between deck concrete and WPS, and liquid types were detached in between asphalt pavement and WPS.

• Proceedings of the KOR-KST Conference
• /
• 2000.02a
• /
• pp.3-22
• /
• 2000

이용자의 경로선택 형태를 모사하는 통행배정모형 결과의 정확도는 교통계획에 상당한 영향을 미친다. 이용자의 경로선택 결정과정에서 가장 중요한 판단기준은 통행시간과 통행요금이다. 그런데 통행요금은 이용자의 경로거리에 따라 다양한 방식으로 부과되므로, 링크를 분석단위로 하는 기존의 통행배정모형은 현실적인 통행요금 반영이 힘들었고 또한 수요예측 결과를 이용한 다양한 분석에서 제약을 받아 왔다. 본 연구는 이러한 배경에서 경로교통량을 도출할 수 있는 경로기반 통행배정모형을 구축하였고, 또한 경로거리에 따라 결정되는 현실적인 통행요금을 반영할 수 있는 알고리즘을 개발하였다. 경로기반 배정모형에서는 GP(Gradient Projection) 알고리즘을 이용하였고, 계산상의 효율성 제고를 위해 K-최단경로 알고리즘 중 MPS(Minimal Path Search) 알고리즘을 이용하였다. 개발된 배정 모형은 현실적인 통행요금을 반영할 수 있으므로 통행배정 결과의 정밀도를 향상시켰을 뿐만 아니라 기존 배정모형에 비해 최적해로의 수렴속도도 개선되는 것으로 나타났다. 본 논문의 배정모형은 경로교통량이 도출되고 통행요금을 반영할 수 있으므로, 통행요금과 통행 거리 관계에 따른 목적함수의 규명과 그에 따른 효과척도를 계량화할 수 있다. 따라서 본 모형은 통행배정에서 실재상황을 보다 현실여건에 맞도록 규명할 수 있고, 기존의 제한적인 효과분석의 문제점을 해결할 수 있으므로 그 활용범위가 넓다. 또한 본 논문은 개발된 배정모형의 적용사례로서 고속도로 수요관리 요금체계 개선방안을 제시하였다. 기존의 고속도로 통행요금 산정 방법은 이론적 근거가 미약했던 반면, 본 논문에서 개발된 배정모형과 고속도로 수요관리 요금체계 개선방안은 고속도로 통행료 결정에 대한 과학적이고 합리적인 분석방법을 제공하였다.한 민감도 분석을 실시한 결과 대안1의 경우 교통량의 변화 및 화물통행의 시간가치의 증가시 사회적 편익이 오히려 감소하였고, 대안2와 3의 경우 사회적 편익이 증가하는 것을 알 수 있었다. 이는 경부고속도로의 화물차량의 구성비에 따라 대안 1의 경우 오히려 화물차의 통행시간이 증가함에 그 원인이 있다 할 것이다. 이상과 같은 결론을 통하여 경부고속도로상의 화물전용차선의 설치시는 수답렬 교통량의 구성비와 구간 평균교통량에 의하여 그 효과가 다르게 나타남을 알 수 있었다. 따라서 물류비용 절감차원에서의 화물전용차선의 설치는 본 연구에서 나타낸 방법과 같이 수단간의 경제적 편익을 고려한 구간별 시간대별 효과분석을 통하여 정책의 시행여부가 결정되어야 할 것이다. 한편, 화물전용차선의 설치로 인한 물류비용의 절감을 보다 효과적으로 달성하기 위해서는 종합류류 전산망의 시급한 구축과 함께 화물차의 적재율을 높이고 공차율을 낮출 수 있는 운송체계의 수립이 필요한 것으로 판단된다. 그라나 이러한 화물전용차선의 효과는 단기적인 치유책일 수밖에 없기 때문에 물류유통 시설의 확충을 위한 사회간접자본의 구축을 서둘러 시행하여야 할 것이다.으로 처리한 Machine oil, Phenthoate EC 및 Trichlorfon WP는 비교적 약효가 낮았다.>$^{\circ}$E/$\leq$30$^{\circ}$NW 단열군이 연구지역 내에서 지하수 유동성이 가장 높은 단열군으로 추정된다. 이러한 사실은 3개 시추공을 대상으로 실시한 시추공 내 물리검층과 정압주입시험에서도 확인된다.. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of co