• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.1-10
• /
• 2012

Mobility and quality of service (QoS) are becoming the more important issues in wireless communications. The traditional Internet service is expanding into new access media and applications. Since wireless communication services are accompanied by frequent handovers at remote sites, scalable and fast handover has become a prerequisite for ubiquitous communication. In this paper, the differentiated service (Diffserv) model is deployed in heterogeneous proxy mobile IPv6 (PMIPv6) networks to satisfy the QoS guaranteed service and fast handover requirements. The operational procedures for QoS guaranteed global roaming are presented. In addition, QoS management and handover cost evaluation schemes based on a mobile host's movement scope are proposed. This paper analyzes the reduction in handover delay in a network-based localized mobility management framework. We propose and analyze a PMIPv6 optimized with a global mobile access gateway (G-MAG), which is a network-based entity, to further improve the handover performance in terms of handover delay while maintaining minimal signaling overhead in the air interface among converged heterogeneous wireless networks. The handover signaling procedures with host-based MIPv6 are compared with network-based proxy MIPv6 (PMIPv6) and fast PMIPv6 assisted by G-MAG to show how much handover delay reduction can be achieved. Analytical results show that the handover delay is significantly reduced.

• Journal of Periodontal and Implant Science
• /
• v.47 no.3
• /
• pp.143-153
• /
• 2017

Purpose: The aim of the present exploratory study was to evaluate extraction socket healing at sites with a history of periodontal and endodontic pathology. Methods: The mandibular 4th premolar teeth in 5 adult beagle dogs served as experimental units. Periodontal and endodontic lesions were induced in 1 premolar site in each animal using wire ligatures and pulpal exposure over 3 months (diseased sites). The contralateral premolar sites served as healthy controls. The mandibular 4th premolar teeth were then extracted with minimal trauma, followed by careful wound debridement. The animals were sacrificed at days 1, 7, 30, 60, and 90 post-extraction for analysis, and the healing patterns at the healthy and diseased extraction sites were compared using radiography, scanning electron microscopy, histology, and histometry. Results: During the first 7 days of healing, a significant presence of inflammatory granulation tissue was noted at the diseased sites (day 1), along with a slightly accelerated rate of fibrin clot resolution on day 7. On day 30, the diseased extraction sites showed a greater percentage of persistent fibrous connective tissue, and an absence of bone marrow formation. In contrast, healthy sites showed initial signs of bone marrow formation on day 30, and subsequently a significantly greater proportion of mature bone marrow formation on both days 60 and 90. Radiographs exhibited sclerotic changes adjoining apical endodontic lesions, with scanning electron microscopy showing collapsed Volkmann canals protruding from these regions in the diseased sites. Furthermore, periodontal ligament fibers exhibited a parallel orientation to the alveolar walls of the diseased sites, in contrast to a perpendicular arrangement in the healthy sites. Conclusions: Within the limitations of this study, it appears that a history of periodontal and endodontic pathology may critically affect bone formation and maturation, leading to delayed and compromised extraction socket healing.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.4
• /
• pp.650-654
• /
• 2013

The feasibility of incorporating cinnamon as a value-added food ingredient in bakery food products was investigated using sponge cakes as a model system. Cinnamon powder was incorporated into sponge cakes at 0, 1, 2, 3, or 4% weight amounts, based on the total weight of wheat flour. Cake qualities, such as pH, moisture content, specific volume, and baking loss, decreased significantly with increasing levels of cinnamon powder added (p<0.05). In terms of color, lightness and yellowness decreased, with increasing levels of cinnamon powder. Redness significantly increased for crumb, but decreased for crust (p<0.05) with increasing levels of cinnamon powder. Hardness also significantly increased (p<0.05), while total polyphenol content significantly increased, up to a 2% addition of cinnamon powder, and gradually increased afterwards. Finally, the consumer acceptance test has indicated that higher levels of cinnamon incorporation (2% or higher, w/w) have a considerable adverse effect on consumer preferences in all attributes. In contrast, sponges cakes with a minimal level of cinnamon powder (1%, w/w) are recommended for taking advantage of the functional properties of cinnamon powder without sacrificing consumer acceptability.

• Geomechanics and Engineering
• /
• v.14 no.1
• /
• pp.99-105
• /
• 2018

Soils are generally classified as fine-grained or coarse-grained depending on the percentage content of the primary constituents. In reality, soils are actually made up of mixed and composite constituents. Soils primarily classified as fine-grained, still consists of a range of coarse particles as secondary constituents in between 0% to 50%. A laboratory scale model test was conducted to investigate the influence of coarse particles on the physical (e.g., density, water content, and void ratio) and mechanical (e.g., quick undrained shear strength) properties of primarily classified fine-grained cohesive soils. Pure kaolinite clay and sand-mixed kaolinite soil (e.g., sand content: 10%, 20%, and 30%) having various water contents (60%, 65%, and 70%) were preconsolidated at different stress levels (0, 13, 17.5, 22 kPa). The quick undrained shear strength properties were determined using the conventional Static Cone Penetration Test (SCPT) method and the new Fall Cone Test (FCT) method. The corresponding void ratios and densities with respect to the quick undrained shear strength were also observed. Correlations of the physical properties and quick undrained shear strengths derived from the SCPT and FCT were also established. Comparison of results showed a significant relationship between the two methods. From the results of FCT and SCPT, there is a decreasing trend of quick undrained shear strength, strength increase ratio ($S_u/P_o$), and void ratio (e) as the sand content is increased. The quick undrained shear strength generally decreases with increased water content. For the same water content, increasing the sand content resulted to a decrease in quick undrained shear strength due to reduced adhesion, and also, resulted to an increase in density. Similarly, it is observed that the change in density is distinctively noticeable at sand content greater than 20%. However, for sand content lower than 10%, there is minimal change in density with respect to water content. In general, the results showed a decrease in quick undrained shear strength for soils with higher amounts of sand content. Therefore, as the soil adhesion is reduced, the cone penetration resistances of the FCT and SCPT reflects internal friction and density of sand in the total shear strength.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.37
• /
• pp.33.1-33.9
• /
• 2015

Background: The porion (Po) is used to construct the Frankfort horizontal (FH) plane for cephalometrics, and the external auditory meatus (EAM) is to transfer and mount the dental model with facebow. The classical assumption is that EAM represents Po by the parallel positioning. However, we are sometimes questioning about the possible positional disparity between Po and EAM, when the occlusal cant or facial midline is different from our clinical understandings. The purpose of this study was to evaluate the positional parallelism of Po and EAM in facial asymmetries, and also to investigate their relationship with the maxillary occlusal cant. Methods: The 67 subjects were classified into three groups. Group I had normal subjects with facial symmetry ($1.05{\pm}0.52mm$ of average chin deviation) with minimal occlusal cant (<1.5 mm). Asymmetry group II-A had no maxillary occlusal cant (average $0.60{\pm}0.36$), while asymmetry group II-B had occlusal cant (average $3.72{\pm}1.47$). The distances of bilateral Po, EAM, and mesiobuccal cusp tips of the maxillary first molars (Mx) from the horizontal orbital plane (Orb) and the coronal plane were measured on the three-dimensional computed tomographic images. Their right and left side distance discrepancies were calculated and statistically compared. Results: EAM was located 10.3 mm below and 2.3 mm anterior to Po in group I. The vertical distances from Po to EAM of both sides were significantly different in group II-B (p=0.001), while other groups were not. Interside discrepancy of the vertical distances from EAM to Mx in group II-B also showed the significant differences, as compared with those from Po to Mx and from Orb to Mx. Conclusions: The subjects with facial asymmetry and prominent maxillary occlusal cant tend to have the symmetric position of Po but asymmetric EAM. Some caution or other measures will be helpful for them to be used during the clinical procedures.

• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.389-394
• /
• 2015

There is a progressive development in the medical imaging technology, especially of descriptive capability for anatomical structure of human body thanks to advancement of information technology and medical devices. But however maintenance of correct posture is essential for the medical imaging checkup on the shoulder joint requiring rotation of the upper limb due to the complexity of human body. In the cases of MRI examination, long duration and fixed posture are critical, as failure to comply with them leads to minimal possibility of reproducibility only with the efforts of the examiner and will of the patient. Thus, this study aimed to develop an auxiliary device that enables rotation of the upper limb as well as fixing it at quantitative angles for medical imaging examination capable of providing diagnostic values. An auxiliary device has been developed based on the results of precedent studies, by designing a 3D model with the CATIA software, an engineering application, and producing it with the 3D printer. The printer is Objet350 Connex from Stratasys, and acrylonitrile- butadiene-styrene(ABS) is used as the material of the device. Dimensions are $120{\times}150{\times}190mm$, with the inner diameter of the handle being 125.9 mm. The auxiliary device has 4 components including the body (outside), handle (inside), fixture terminal and the connection part. The body and handle have the gap of 2.1 mm for smooth rotation, while the 360 degree of scales have been etched on the handle so that the angle required for observation may be recorded per patient for traceability and dual examination.

• Journal of the Korea Safety Management & Science
• /
• v.21 no.4
• /
• pp.75-80
• /
• 2019

Sales of the Korean clothing industry grew to 16.9 percent on-year in 2010, but the growth rate dropped to 3 percent from 2011 to 2016 and the overall market began to slump to 1.1.6 percent in 2017. The competitiveness of clothing companies is also a major sector in logistics capability, and the average logistics cost of domestic clothing companies is 8.3 percent of sales in 2011, higher than the average 8 percent of domestic industries, and 36.4 percent of the total storage cost in 2011, higher than the 28.8 percent share of the total storage cost of domestic companies. As domestic production conditions such as wage hikes and labor disputes worsened in the 1990s, production facilities were rapidly moved overseas, which led many clothing companies to have no production facilities or a minimal production base in Korea and focus on marketing and design capabilities. The total storage capacity and storage efficiency of the logistics center became very important as the products were changed to the form of mass warehousing and small-volume forwarding. Research shows that building column spacing, a model of this research, can affect the amount of hanger rack storage empirically, so for sustainable growth of clothing companies, it is necessary to improve competitiveness in the logistics market by reducing costs and improving efficiency to overcome difficulties in corporate management. Because logistics costs are 8.3 percent and operating profit to sales ratio is 2 percent, it is expected that operating profit will increase by 41.5 percent if logistics costs are reduced by 10 percent. If 10% of storage cost is saved based on storage cost, operating profit is expected to increase by 15% To strengthen the competitiveness of the clothing industry, a reduction in logistics costs is essential. Therefore, the purpose of this study is to provide hints that logistics experts can have empirically small amounts in reducing storage costs through column spacing adjustment of logistics centers that have not been dealt with statistically until now, and to contribute to the continued growth of clothing companies and the development of the domestic logistics industry.

• Archives of Pharmacal Research
• /
• v.25 no.5
• /
• pp.655-663
• /
• 2002

Liver fibrosis is a prepathological state wherein damaged liver tissues in chronic liver diseases, such as hepatitis, are not repaired to normal tissues, but converted to fibrous tissue. 5-(2-Pyrazinyl)-4-methyl-1,2-dithiol-3-thione (oltipraz), a cancer chemopreventive agent, is effective against a wide variety of chemical carcinogens. Recently, we reported that oltipraz inhibits liver fibrogenesis (Kang et al., 2002). In the present study, the effects of oltipraz in combination with dimethyl-4,4'-dimethoxy-5,6,5',6'-dimethylene dioxybiphenyl-2,2'-dicarboxylate (DDb) on dimethylnitrosamine (DMN)-induced liver fibrogenesis were assessed in rats. Oltipraz (30 mg/kg body weight, po, 3 times per week for 4 weeks) was found to inhibit the increases in plasma ALT, AST and bilirubin by DMN, whereas DDB (30 mg/kg body weight, po, 3 times per week for 4 weeks) attenuated the increases in the plasma ALT and bilirubin. The lowered plasma protein and albumin contents in DMN-treated rats were completely restored by oltipraz, but not by DDB. DDB decreases liver cell injury and inflammation through inhibition of nuclear factor-kB. DMN increased the accumulation of liver collagen, as indicated by the increase in the 4-hydroxyproline content in liver homogenates, which was reduced by treatment with oltipraz, but not by DDB. Given the differential effect between oltipraz and DDB, the potential enhancement of antifibrotic efficacy by the drugs was assessed in the animal model. Despite the minimal effect of DDB on DMN-induced fibrogenesis, DDB (5-25 mg/kg), administered together with oltipraz (25-5 mg/kg), showed an additive protective effect against hepatotoxicity and fibrosis induced by DMN, which was shown by the blood chemistry parameters and histopathological analysis. The adequate composition ratio of oltipraz to DDB was 5:1. These results provide information on the pharmaceutical composition, comprising of oltipraz and DDB as the active components, for the treatment and/or prevention of liver fibrosis and cirrhosis.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.468-475
• /
• 2005

Biofilters packed with various materials have emerged as a sustainable technology for the treatment of volatile organic compounds (VOCs); however, problems including low performance and clogging are commonly encountered. Recently, a bioactive foam reactor (BFR) using surfactants has been suggested to ensure efficient and stable VOCs removal performance. This study was mainly conducted to investigate the feasibility of BFRs using toluene as a model compound. Prior to bioreactor studies, a series of bottle tests were used to select a suitable surfactant for the BFR application. Experimental results of the batch bottle tests indicated that TritonX-100 was the most appropriate one among the surfactants tested, since it showed a minimal effect on the toluene biodegradation rate while the other surfactants lowered the toluene biodegradation rate significantly. Using the selected surfactant, the BFR performance was determined by changing operating parameters including gas residence time and toluene loading. As the gas residence time increased from 0.5 minutes to 2 minutes, the toluene removal efficiency increased from approximately 50% to 80%. In addition, an increase of the toluene loading from $38\;g/m^3/hr$ to $454\;g/m^3/hr$ resulted in a decrease of toluene removal efficiency from approximately 70% to 20%. The BFR had a maximum elimination capacity of $108\;g/m^3/hr$ for toluene, which was much higher than those generally reported in the literature. The high toluene-elimination performance indicates that the BFR be a potential alternative to the conventional, packed-type biofilters. However, the limitation of toluene solubilization and foam stability at either high or low gas flow rate are still problems to be challenged.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.2
• /
• pp.85-90
• /
• 2009

STATEMENT OF PROBLEM. Over the years, resin-bonded fixed partial dentures (RBFPDs) have gone through substantial development and refinement. Several studies examined the biomechanics of tooth preparation and framework design in relation to the success rate of RBFPDs and considered retention and resistance form essential for increase of clinical retention. However, these criteria required preparations to be more invasive, which violates not only the original intentions of the RBFPD, but may also have an adverse effect on retention due to loss of enamel, an important factor in bonding. PURPOSE. The object of this in vitro study was to compare the dislodgement resistance of the new types of RBFPDs, the conventional three-unit fixed partial denture, and conventional design of RBFPD (Maryland bridge). MATERIAL AND METHODS. Fifty resin mandibular left second premolars and second molars were prepared on dentiforms, according to the RBFPD design. After model fabrication (five group, n = 10), prostheses were fabricated and cemented with zinc phosphate cement. After cementation, the specimens were subjected to tensile loading at a cross head speed of 4 mm/min in a universal testing machine. The separation load was recorded and analyzed statistically using one-way analysis of variance followed by Duncan's multiple range test. RESULTS. Group V, the pin-retained RBFPDs, had the highest mean dislodgement resistance, whereas specimens of group II, the conventional RBFPDs, exhibited a significantly lower mean dislodgement resistance compared to the other 4 groups (P <.05). There were no significant differences between group I, III, and IV in terms of dislodgement resistance (P>.05). Group V had the highest mean MPa (N/$mm^2$) (P <.05). There was no significant difference between groups I, II, III and IV (P > .05). CONCLUSION. Within the limits of the design of this in vitro study, it was concluded that: 1. The modified RBFPDs which utilizes the original tooth undercuts and requires no tooth preparation, compared with the conventional design of RBFPDs, has significantly high dislodgement resistance (P < .05). 2. The modified RBFPDs which utilizes the original tooth undercuts and requires minimal tooth preparation, compared with the conventional FPDs, has significantly no difference in retention and dislodgement resistance)(P>.05). 3. The pin-retained FPDs showed a high dislodgement resistance compared to the conventional three-unit FPDs (P<.05).