• Journal of the Mineralogical Society of Korea
• /
• v.29 no.4
• /
• pp.199-207
• /
• 2016

One of the most significant environmental issues in abandoned coal mine is acidic drainage which gives rise to the many environmental problems that acidifying streams water, sedimentation of iron/aluminium hydroxide, and pollution of water and soil. Water and precipitate samples for experiments were collected from stream and bottom in the pit mouth of Sambong mine. Mine water shows pH range from 7.24 to 7.94 in winter and 3.87 to 5.73 in summer season. The EC shows range from 432 to $897{\mu}S/cm$ at the stream receiving mine water. The highest concentrations of cations such as Mg, Al, Ca, and Mn are showing 15.50, 4.56, 85.30, 12.76 mg/L in the pit mouth, respectively. The reddish brown precipitates (Munsell color 10R-5YR in winter and 2.5YR-5Y in summer) consist mainly of 2-line ferrihydrite and schwertmannite. The precipitates are characterized by rod or cylindrical forms, and coccus or sphere of 0.1 to $0.5{\mu}m$ in diameter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.582-587
• /
• 2020

Recently, disasters caused by extreme weather and the damage caused by them are increasing worldwide. The interest in disasters, such as earthquakes, typhoons, and ground subsidence, is increasing in Korea. Korea has enacted a special law based on disaster management, and has built monitoring systems for individual facility units by building precision sensors and related systems to measure the displacement status of long bridges and high-rise composite buildings. On the other hand, the application of a real-time monitoring system is insufficient for slopes, open-pit mines, small and medium structures due to weather, measurement methods, cost, and constant monitoring difficulties. In this study, the displacement monitoring method using the total station was studied and the applicability was suggested through the experiment. Through the research, the concept and operation flow of a monitoring system that can measure the displacement of the terrain or the structure using the total station was presented. The monitoring system allows the user to select the location and operation method of the equipment so that the equipment can be installed according to the site situation, and set the number of observations, the period, and the observation range of the object. Using the experiment on the monitoring system, the station was monitored with precision within 5mm, and it was suggested that the displacement of the object can be monitored using the total station. Further research will be needed to assess the applicability of monitoring to real slopes and structures.

• Journal of Korean Society of Forest Science
• /
• v.95 no.1
• /
• pp.23-31
• /
• 2006

Vegetation structure of Samchang, Bongmyeong, Kabjeong, Danbong coal mine and control site was investigated to provide basic information on vegetation rehabilitation of abandoned coal mine lands in Mungyeong. Gyeongbuk Province. The middle and lower layer consisted of 3 and 10 species for Samchang, 2 and 5 species for Bongmyeong, 7 and 11 species for Kabjeong, 9 and 12 species for Danbong coal mine, and 15 and 17 species appeared for control site, respectively. Importance value of Lespedeza cyrtobotrya in lower layer was the highest for in Samchang, and that of Rubus crataegifolius in other coal mine lands wast he highest. Importance value in herbaceous layer was the highest for Arundinella hirta in Samchang, for Corchoropsis tomentosa in Bongmyeong, for Miscanthus sinensis in Kabjeong, for Carex lanceolata and Artemisia princeps var. orientalis in Danbong coal mines, and Calamagrostis arundinacea in control site was the highest, respectively. Species diversity of middle and lower layer for four coal mine lands ranged from 0.201 to 0.666 and 0.612 to 0.895, respectively. Evenness of lower layer ranged from 0.683 to 0.875 for four coal mine lands, and it was 0.990 for control site.

• Composites Research
• /
• v.26 no.6
• /
• pp.363-372
• /
• 2013

Numerical simulation for Resin Transfer Molding manufacturing process is attempted by using the eXtended Finite Element Method (XFEM) combined with the level set method. XFEM allows to obtaining a good numerical precision of the pressure near the resin flow front, where its gradient is discontinuous. The enriched shape functions of XFEM are derived by using the level set values so as to correctly describe the interpolation with the resin flow front. In addition, the level set method is used to transport the resin flow front at each time step during the mold filling. The level set values are calculated by an implicit characteristic Galerkin FEM. The multi-frontal solver of IPSAP is adopted to solve the system. This work is validated by comparing the obtained results with analytic solutions. Moreover, a localization method of XFEM and level set method is proposed to increase the computing efficiency. The computation domain is reduced to the small region near the resin flow front. Therefore, the total computing time is strongly reduced by it. The efficiency test is made with a simple channel flow model. Several application examples are analyzed to demonstrate ability of this method.

• Tunnel and Underground Space
• /
• v.26 no.1
• /
• pp.24-31
• /
• 2016

Recently, many studies have been conducted to use fixed-wing and rotary-wing unmanned aerial vehicles (UAVs, Drones) for topographic surveying in open-pit mines. Because the fixed-wing and rotary-wing UAVs have different characteristics such as flight height, speed, time and performance of mounted cameras, their results of topographic surveying at a same site need to be compared. This study selected a construction site in Yangsan-si, Gyeongsangnam-do, Korea as a study area and compared the topographic surveying results from a fixed-wing UAV (SenseFly eBee) and a popular rotary-wing UAV (DJI Phantom2 Vision+). As results of data processing for aerial photos taken from eBee and Phantom2 Vision+, orthomosaic images and digital surface models with about 4 cm grid spacing could be generated. Comparisons of the X, Y, Z-coordinates of 7 ground control points measured by differential global positioning system and those determined by eBee and Phantom2 Vision+ revealed that the root mean squared errors of X, Y, Z-coordinates were around 10 cm, respectively.

• Tunnel and Underground Space
• /
• v.26 no.1
• /
• pp.1-11
• /
• 2016

This study deals with the case that was the field application of the microseismic monitoring techniques for the stability monitoring in a domestic mine. The usefulness and limitations of the microseismic techniques were examined through analyzing the microseismic monitored data. The target limestone mine adopted a hybrid room-and-pillar mining method to improve the extraction ratio. The accelerometers were installed in each vertical pillar within the test bed which has the horizontal cross-section $50m{\times}50m$. The measured signals were divided into 4 types; blasting induced signal, drilling induced signal, damage induced signal, and electric noise. The stability analysis was performed based on the measured damage induced signals. After the blasting in the mining section close to the test bed, the damage of the pillar was increased and rockfall near the test bed could be estimated from monitored microseismic data. It was possible to assess the pillar stability from the changes of daily monitored data and the proposed safety criteria from the accumulated monitored data. However, there was a difficulty to determine the 3D microseismic source positions due to the 2D local sensor arrays. Also, it was needed to use real-time monitoring methods in domestic mines. By complementing the problems encountered in the mine application and comparing microseismic monitored data with mining operations, the microseismic monitoring technique can be used as a better safety method.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.1
• /
• pp.103-115
• /
• 2007

Risk assessment by living indicator species provides the information about the ecosystem disturbance, disapperance of symbiosis and change of living group. In the initial stage of this kind research, the degree of contamination was reported using the level of simple number, but simple number may not represent the risk itself which can be casued in the living organisms. Risk assessment using various indicator species overcomes these limitations and can be expanded to the DNA level. In many developed counties, the government has supervised the researches about the indicator species for the monitoring and its application to ecosystem restoration. Several living indicator species found in the vicinity of the abandoned Au mines such as fern, earthworm, bacteria, rhizosphere-rhizoplane, salamamdor and DNA change of these species are described in this paper.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.3 s.49
• /
• pp.129-138
• /
• 2006

In this study, we identified the secondary precipitates from Samsan-jeil and Sambong mine, Goseong, Gyeongnam by means of scanning electron microscopy, electron probe microanalysis and X-ray powder diffraction analysis. Copper sulfide minerals had been produced from the mines during last few decades, however they are not worked. White and blue precipitates were found at the downstream of mine rock dump at Sambong mine and green one was at Samsan-jeil mine. The white precipitate covered the host rock surface with thickness of $30{\mu}m$, and is a kind of diatom with $10{\mu}m$ in length and $3{\mu}m$ in width. It is a species Fragilaria constuens, which is contained a order Pennales(pennate diatom) and lives in fresh water. The blue precipitate is the alteration product of chalcopyrite. It resultes in the increase in the ratio Cu:Fe from 5 to 13. The green precipitate has worm-like morphology with $10{\sim}20nm$ in diameter and $200{\sim}300nm$ in length. It is mainly composed of secondary copper sulfate such as woodwardite. However, it could be formed by the activity of microorganism, because the copper content is more than any secondary copper sulfate reported in copper sulfide mine. In order to identity the green precipitate exactly, the further research is needed.

• Economic and Environmental Geology
• /
• v.22 no.3
• /
• pp.253-266
• /
• 1989

The Cu-Pb-Zn-Ag hydrothermal vein type deposits which comprise the Dongil and Dong-cheogogsan mines occur within the Cretaceous sedimentary rocks in the Euiseong Basin of the southern Korean peninsula. The ore mineralization is contained within three stage(I,II and III) quartz and calcite veins. Ore minerals occur as dominant chalcopyrite, galena, sphalerite, tetrahedrite and Pb, Ag, Sb and Bi-bearing sulfosalts. Stage I ore minerals were deposited between $400^{\circ}C$ and $200^{\circ}C$ from the fluid with moderate salinities(7.0 to 4.5 eq. wt. % NaCl). Evidence of boiling suggests pressure of less than 150 bars during stage I mineralization. This pressure corresponds to maximum depths of 650 m and 1700 m, respectively, assuming lithostatic and hydrostatic loads. The data on mineralogy, temperature and salinity, together with information on the solubility of Cu complex, suggest that Cu deposition is a result of boiling coupled with declining temperature from $350^{\circ}$ to $250^{\circ}C$ or declining log $a_{o_2}$(from -29.8 to -35.9 atm.)and increasing in pH. Pb, Ag, Sb and Bi-bearing sulfosalts were deposited by cooling and dilution at temperature of less than $250^{\circ}C$ from the ore fluid with less than -35.9 atm. of log $a_{o_2}$.

• Korean Journal of Environmental Biology
• /
• v.32 no.4
• /
• pp.271-285
• /
• 2014

Aluminum flows into the river from the abandoned mine leachate, industrial wastewater, and sewage and is responsible for acute toxicity in aquatic organisms. Recently, the number of reports have indicated the increased toxicity in a variety of aquatic organisms' due to the aluminum toxicity. In this study, we reviewed the toxicity of aluminum on aquatic invertebrates, fishes and amphibians and suggested the guideline for management of aluminum residues in aquatic environment and strategies for aluminum toxicity evaluation. In aquatic animals aluminum complexes evoke gill dysfunction primarily, the cytotoxicity, genotoxicity, oxidative stress, disruption of endocrine function, reproductive success, metabolism and homeostasis. Notably, at environmentally relevant concentration, aluminum complex can alter the hormone levels in fish in acidic condition. Further, since the solubility of aluminum is higher in the acidic and basic conditions, thus it is likely that the toxic effects of aluminum may not only occur in acidic water near the abandoned mines but also in lakes and rivers, where pH is raised by algal bloom.