• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.501-504
• /
• 2003

Sulfur isotope composition was used to identify the sources of groundwater contamination near abandonded coal mines. From the analysis of mine adit drainages, tailing seepages, and spring waters near the abandonded Hambaek and Hanchang coal mines in Kangwon Province, it was inferred that it the highly possible source of the contamination of spring water is acid mine drainage(AMD). Sulfur isotope composition showed that seepage from tailings seemed to have more effect on the groundwater contamination than mine adit drainage, which suggests the remediation and anti-contamination methods of tailing seepages not only mine adit drainage are required.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2000.11a
• /
• pp.25-29
• /
• 2000

Nowadays, natural resource are running out and the level of the environment contamination is getting serious. To solve these problems, each country and institute tend to need many-sided researchs and developments. At this point, especially, there are many coal-mines in Jung-sun and Tae-back where are located in Kangwon province. By the way the abandoned mines cause not only local economy collapse but also environment contamination by submergence of stony mountains. The counterplan is positively inquired further examination by the government. Consequently, we hope that the recycle of polymer concrete can reduce the environment contamination, suggest the new direction of Green Design and can be switched over high added value goods. In conclusion, the recycle of polymer concrete will be valuable.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.389-392
• /
• 2003

Coalfields in Korea have been grouped into thirteen based on mainly geographycal and geological structure, ten out of which have been developed. To classify the phisico-chemical characteristics of mine drainage from each coalfield and, if possible, to clarify the intrinsic reasons of them. Sampling of waters from 59 mines in eight coalfields has been carried out. Higher pH of drainage water from the mines of the Cungchung coalfield belong to the Beading system, Mesozoic era than those belong to the Pyungan system, Proterozoic era is due to the low content of sulfides of neighboring strata. The drainage from coal beds overlying limestone bed mostly show high pH. Waters from the Gangrung and Samchuck coalfields coal beds are located within black shale formation which contains a lot of sulfides showed mostly very high metal and S $O_{4}$$^{2-}$ concentrations.

• Economic and Environmental Geology
• /
• v.32 no.1
• /
• pp.113-121
• /
• 1999

Coal is both source rock and reservoir rock for the coalbed gas. Coalbed gas. Coalbed gas is predominantly methane and has a heating value of approximatly 1000 BTU/$ft^3$. Most of methane is stored in the coal as a monomolecular layer adsorbed on the internal surface of the coal matrix. The amount of methane stored in coal is related to the rank and the depth of the coal. THe higher the coal rank and the deeper the coal seam is presently buried, the greater its capacity to hold gas. Most of Korean Coal is anthracite or metaanthracite, Ro. 3.5~5.5%, and total reserves are 1.6 billion metric tons. The domestic demand for coal was drastically decreased and the rationalization policy carried out from 1987 on coal industry. Now that a large number of coal mines was closed only a few mines continued to produce not more than 5 million tons for year. It is therefore recommended to formulate a strategy to explore and exploit the resources of coalbed methane in Korea.

• Structural Engineering and Mechanics
• /
• v.60 no.2
• /
• pp.175-191
• /
• 2016

The present article is aimed at an investigation of stresses produced in a microstretch elastic half-space due to a moving load. The expressions of normal stress, shear stress and tangential couple stress produced in this case have been obtained in closed form. To find the displacement fields the perturbation method is applied. Significant effect of moving load on variation of stresses developed at different depths below the surface due to the depth of substrate and frictional coefficient of the rough surface of the medium has been observed. The effects of different shapes of irregularity and depth of irregularity on normal, shear and tangential couple stresses have been discussed. Some particular cases have also been deduced from the present investigation. Finally, the analytical developments have been illustrated numerically for aluminium-epoxy-like material substrate under the action of moving load.

• Corrosion Science and Technology
• /
• v.15 no.1
• /
• pp.13-17
• /
• 2016

The aim of this study was to evaluate the use of iron-nickel oxide ($Fe_2O_3$.NiO) nanopowder (FeNi) as an anti-corrosion pigment for a different application. The corrosion protection ability and the mechanism involved was determined using aqueous solution of FeNi prepared in a corrosive solution containing 3.5 wt.% NaCl. Anti-corrosion abilities of aqueous solution were determined using electrochemical impedance spectroscopy (EIS) on line pipe steel (API 5L X-80). The protection mechanism involved the adsorption of metallic cations on the steel surface forming a protective film. Analysis of EIS spectra revealed that corrosion inhibition occurred at low concentration, whereas higher concentration of aqueous solution produced induction behavior.

• Computers and Concrete
• /
• v.3 no.5
• /
• pp.313-334
• /
• 2006

A novel formulation aiming to achieve optimal design of reinforced concrete (RC) structures is presented here. Optimal sizing and reinforcing for beam and column members in multi-bay and multistory RC structures incorporates optimal stiffness correlation among all structural members and results in cost savings over typical-practice design solutions. A Nonlinear Programming algorithm searches for a minimum cost solution that satisfies ACI 2005 code requirements for axial and flexural loads. Material and labor costs for forming and placing concrete and steel are incorporated as a function of member size using RS Means 2005 cost data. Successful implementation demonstrates the abilities and performance of MATLAB's (The Mathworks, Inc.) Sequential Quadratic Programming algorithm for the design optimization of RC structures. A number of examples are presented that demonstrate the ability of this formulation to achieve optimal designs.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.804-809
• /
• 2004

This paper introduces a link-type tracked vehicle which is developed for demining operations. The vehicle consists of three parts - front frame, rear frame and body. The front frame is connected to the rear frame by a rotational passive adaptation mechanism which is a driving mechanism of the vehicle. Additionally, the demining system which is adaptable to mobile robot is developed to clear small Anti-Personnel(AP) mines with inexplosive method. In other words, assembled rakes unearth mines by their opposite rotation to the direction of the robot. Finally, the motions of demining rakes and design parameters of the demining system are analyzed.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.2
• /
• pp.231-236
• /
• 2010

The investigation was initiated with data from 27 abandoned mines along with 12 locations in Kyongbuk abandoned mines. The analyses for soil pollution by heavy metal pollutants were conducted by using correlation analysis, cluster analysis, and principal component analysis. The correlation analysis indicated that Ni and pH were highly correlated compared to those of other heavy metal ions. The principal component analyses showed that the heavy metal ions might be classified into two catagories, such as antropogenic and lithogenic components. The cluster analysis was also clearly divided by two groups. The respective two groups might be Pb-Zn-Cd-Cu and As-Hg-Ni.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.177-179
• /
• 2002

A1$_2$ $O_3$기판재료의 $K_{IC}$ 증가를 위한 재료설계를 시도하였다. 먼저 A1$_2$ $O_3$기판을 구성하는 A1$_2$ $O_3$다층구조물에 적절한 다공성 중간층을 삽입하는 샌드위치 구조물을 제조하였다. 제조된 A1$_2$ $O_3$구조물의 미세구조를 관찰하였고, Vickers 경도와 three-point bending test를 통해서 단일조성 구조물과 샌드위치 구조물의 경도와 인성 측정치를 비교하였다. 다공층을 삽입한 A1$_2$ $O_3$샌드위치 구조물의 Single-Edge Notched Beam이 단일 조성의 구조물에 비해 파괴강도와 인성이 향상되는 결과를 얻었다.