• Journal of the Mineralogical Society of Korea
• /
• v.13 no.3
• /
• pp.147-163
• /
• 2000

The mineralogy and chemical composition of reddish to brownish yellow residual soils, so called "Hwangto" have been examined according to representative host rocks. The result of the study indicates that Hwangto consists of 40-80% clay minerals and various minerals such as quartz, feldspar, hornblende, goethite, and gibbsite. Clay minerals include kaolinite, halloysite, illite, hydroxy interlayered vermiculite (HIV), mica/vermiculite interstratifield mineral and chlorite. The mineralogical constituents and contents of Hwangto were different depending on the types of host rocks. Moreover, the Jurassic granitic rocks contain relatively more kaolin minerals, whereas the Cretaceous granitic rocks contain more HIV and illite. In addition, reddish Hwangto contains relatively more kaolinite and HIV, and yellowish Hwangto contains more illite and halloysite. It is suggested that feldspars and micas of host rocks were chemically weathered into illite, halloysite, illite/vermiculite interstratified minerals, and HIV, and finally into kaolinite. Compared with their host rocks, the major chemical compositions of Hwangto tend to contain more $Al_2O_3,\;Fe_2O_3,\;H_2O$ in amount and less Ca, Mg, and Na. Hwangto contains relatively high amount of trace elements, P, S, Zr, Sr, Ba, Rb, and Ce including considerable amount of Li, V, Cr, Zn, Co, Ni, Cu, Y, Nb, La, Nd, Pb, Th in excess of 10 ppm. Relatively high amount of most trace elements were detected in the Hwangto. The major and minor chemical compositions of the Hwangto were different depending on the types of host rocks. However, their difference was in the similar range compared with the compositions of host rocks.

• Economic and Environmental Geology
• /
• v.13 no.4
• /
• pp.215-227
• /
• 1980

The rock units of Goesan area in the Ogcheon metamor phic terrain established on the basis of field criteria should be redefined into following sequence. Based on shear senses in secondary small structures which are usually observable in the investigated area, the stratigraphy can be lithologically divided into the lower pelite, pebbly mudstone, upper pelite, quartzite and psammite unit in ascending order. This conclusion is in discordance with a previous opinion; Munjuri formation and Guryongsan formation may be equivalent to upper pelite unit, Iwonri formation and Hwanggangri formation to pebbly mudstone. From this, it may be inferred that isoclinal overturned folds repeatly occur in the area. The uranium bearing coaly thin layers in upper pelite unit have relatively broad exposures in Deogpyeongri block of Goesan area along culmination zone in the central part of the investigated area. It is believed that structural feature in the block recognized complexly refolded synform plunging to southwest. Mineralogical and radiometric studies were made on 135 representative samples from the Ogcheon Group of Korea. The mineralogy of all black slate samples is qualitatively similar but quantitatively ·different. The uranium distribution in the studied area show approximately log normal. Uranium in the black slates of the Ogcheon Group was deposited together under same physico-chemical environmental conditions. The chemical and geological factors that controlled the abundance of organic carbon and iron oxides also controlled the uranium content. The relationship of the major components to uranium can be expressed by the following regression equation: $Log(U\times10^4+1)$= 1.70999-0.00367(quartz)0.00512(micas)-0.00930 (other silicates)+0.01911 (iron oxides)-0.03389(other opaques)+0.02062(organic carbon).

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.5
• /
• pp.49-56
• /
• 2013

The necessity of exploration in deep sea increases to develop the natural resources. The deep marine sediments, which were recovered from the hydrate occurrence regions during the Ulleung Basin Gas Hydrate Expedition 2 (UBGH2), East Sea, Korea in 2010, are explored to obtain the geotechnical characteristics and strength parameters. The index properties of the specimens including the atterberg limits, specific surface, and particle size distribution are measured and compared with the previous studies. X-ray diffraction, scanning electron microscope, and X-ray energy dispersive spectroscopy are conducted to analyze the clay mineralogy, chemical composition, and microstructure of the sediments. Strength parameters and shear wave velocities are measured with the axial strain by using an instrumented triaxial device. The strength parameters estimated by empirical equations are compared with the experimental results.

• Economic and Environmental Geology
• /
• v.21 no.3
• /
• pp.223-234
• /
• 1988

A large number of gold and/or silver-bearing quartz veins occur in or near Mesozoic granite batholith elongated in a NE-SW direction within the Chungcheong Province. Precambrian schists and gneisses, and Jurassic and Cretaceous granitic rocks serve as hosts for gold and/or silver deposits. On the basis of Ag/Au total production and ore grade ratio, 15 mines may be divided into three major groups: gold-dominant deposits, gold-silver deposits, and silver-dominant deposits. The chemical composition of electrum from skarn deposit (Geodo mine), alaskite-type deposit (Geumjeong mine) and 15 vein deposits was summarized. It was found that the Au content of electrum for vein deposits ranging from 5.2 to 86.5 is lower than that for skarn and alaskite deposits. Among 15 vein deposits, the composition of electrum associated with pyrrhotite is relatively high and has a narrow range of 40.8 to 86.5 atomic % Au, but the Au content of electrum with pyrite is in range of 5.2 to 82.8 atomic %, and is clearly lower than that with pyrrhotite. The grouping of ages for these mines indicates that gold and/or silver mineralizations occurred during two periods in the Mesozoic. Daebo igneous activities are restricted to gold mineralization in the range of 158 to 133 Ma, whereas Bulgugsa igneous activities are related to gold and/or silver mineralization ranging from 108 to 71 Ma. Generally speaking, Jurassic gold-dominant veins have many common characteristics; notably prominent association with pegmatites, simply massive vein morphology, high fineness in the ore concentrates, rarity of silver minerals, and a distinctively simple mineralogy, including sphalerite, galena, chalcopyrite, pyrrhotite and/or pyrite. Although individual deposits exhibit widely differing diversity, Cretaceous gold-silver and silver-dominant veins are characterized by features such as complex vein, low to medium fineness in the ore concentrates and abundance of silver minerals including Ag sulfosalts, Ag sulfides, Ag tellurides and native silver.

• Economic and Environmental Geology
• /
• v.21 no.3
• /
• pp.235-255
• /
• 1988

Talc deposit of pipe-like form occurrs in the lower part of the Hyangsanri Dolomite with a strike of N40 -50 E and a dip of 40 -50 NW which is one formation of the Ogcheon Super Croup. The pipi-like ore body plunge at about $40^{\circ}$ to the west and are parallel to the lineation developed in the area. Structural formulae of tales occurred in this deposit are close to the ieal composition $Mg_6Si_8O_{20}(OH)_4$ showing limited deviation from ideal one. Substitution of Al for Si in tetrahedral site is of little or nothing ranging 0-0.04 and octahedral occupancy is close to six ranging 5.88-5.98 atoms per unit cell. Predominant octahedaral cation is Mg and proportion of divalent cations is generally over 97percent. Calcite -dolomite thermometry is obtained by determining the mol % $MgCO_3$using of EPMA and XRD methods. The peak metamorphic temperature can be estimated at $470{\pm}30^{\circ}C$ in the area whereas carbonates occurred at near talc ore show lower temperature than $400^{\circ}C$ that the calcite solvus limit is not well established. It indicates that the talc deposit was formed at the lower temperature that the metamorphic temperature. Cosequently, the formation of talc by metamorphism is questionable and the alteratin zone developed around the talc ore is very limited. The occurrence of talc ore in the dolomite as well as mineralogy, calcite-dolomite geothermometry, chlorite geothermometry, field and microscopic evidence suggest that siliceous ascending hydrothermal solution along the fracture is responsible for the formation of talc. It was considered that the slight fracturing of dolomite was formed by deformation prior to the mineralization.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.112-117
• /
• 2005

Geophysical logging is routinely undertaken as part of most coal mine exploration programs. Currently, the main application for the logs is to determine coal seam depth and to qualitatively estimate coal quality, lithology, and rock strength. However, further information can be obtained, if quantitative log interpretation is made. To assist in the uptake of quantitative interpretation, we discuss log responses in terms of the mineralogy of the clastic sedimentary rocks frequently found in the Australian black coal mining areas of the Sydney and Bowen Basins. We find that the log responses can be tied to the mineralogy with reasonable confidence. Ambiguities in the interpretation will be better resolved if a full suite of logs is run. A method for checking for internal consistency, by comparing calculated and observed velocities, is also described. A key driver for quantitative interpretation is geotechnical characterisation. We propose a classification system for clastic rocks that takes into consideration physical rock properties that can be inferred from geophysical logs.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.4
• /
• pp.255-264
• /
• 2021

Asian dust (Hwangsa) deposited on the surface of the Korean Peninsula is difficult to recognize their existence in mountainous terrain undergoing active erosion and weathering. This study examined Asian dust sediments mixed in soils by analysing clay mineralogy, mineral composition, and microtextures of fine silt (< 20 ㎛) in the alkali feldspar granite area of Seoraksan. The fine silt was composed of detrital particles derived from bedrocks, Asian dust sediments, and their weathering products. Clay minerals of 2:1 structural type, chlorite, amphibole, epidote, and Ca-bearing plagioclase were identified as eolian mineral particles. During the weathering of the bedrock composed of quartz and alkali feldspars, albite was partially weathered to produce small amounts of gibbsite and kaolin minerals. Hydroxy-Al interlayered clay minerals were formed by the exchange and fixation of polynuclear Al cationic species into the interlayers of expandable 2:1 clay minerals dominated by illite-smectite series clay minerals. Contribution of Asian dust to the fine silt of soils was estimated around 70% on the basis of total contents of 2:1 phyllosilicates.

• Economic and Environmental Geology
• /
• v.49 no.6
• /
• pp.491-504
• /
• 2016

Jinwon Au-Ag deposit is located in the Uijin gun which is southeast 300 km from Seoul. The deposit area consists of mainly Precambrian Hongjesa granite, which occurs as porphyroblastic texture, medium grain and composed of quartz, feldspar and mica. This deposit consists of four parallel hydrothermal quartz veins that fill NE oriented fractures in Precambrian Hongjesa granite. The grade of quartz veins contain from 3.0 to 21.4 g/t (average 6.4 g/t) gold and from 5.0 to 252.0 g/t (average 117.9 g/t) silver, respectively. They vary from 0.2 m to 0.6 m (average 0.3 m) in thickness and extend to about 200 m in strike length. Quartz veins occur as massive, network, cavity, breccia, crustiform, comb and zonal textures. Wallrock alteration has silicification, sericitization, pyritization and argillitization. The mineralogy of the quartz veins consists of quartz, arsenopyrite, cassiterite, pyrite, sphalerite, chalcopyrite, galena, electrum, tetrahedrite, canfieldite, argentite, Ag-Sb-S mineral, Mn-Fe-O mineral, Pb-O mineral and Pb-P-Cl-O mineral(chloro-pyromorphite). Chemical compositions of minerals from this deposit are as followed; Fe/Fe+Mg of sericite is from 0.32 to 0.71, As content of arsenopyrite ranges from 27.91 to 30.33 atomic %, FeS content of sphalerite range from 9.77 to 16.76 mole %, Ag content of electrum is from 29.42 to 37.41 atomic % and Ag content of tetrahedrite range from 32.17 to 36.53 wt.%, respectively. Baased on mineralogy and chemical compositions of minerals from Jinwon Au-Ag deposit, deposition of minerals was caused by a change in temperature, oxygen fugacity($fO_2$) and sulfur fugacity($fS_2$) from the near neutral hydrothermal fluid evolved by reaction with wallrock.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.1
• /
• pp.19-23
• /
• 2003

Polished surface of $CsB_{3}O_{5}$ (CBO) has been observed by reflection high energy electron diffraction (RHEED) and X-ray photoelectron spectroscopy (XPS). For comparison, electronic properties of CBO powder have been studied by XPS. It has been found that the crystal surface is covered by thick amorphous layer with chemical composition closely related to that of CBO. Great enrichment of top surface by cesium, ~30 % in reference to the bulk of the modified layer, has been displayed by depth profiling.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.2034-2040
• /
• 2020

The gas evolution from mixtures consisting of 0.2 M solution of N,N,N',N'-tetra-n-octyldiglycolamide (TODGA) in n-alcohol (n-decanol or n-nonanol) with Isopar-M diluent was investigated during thermal oxidation. The effect of ionizing radiation on their thermal stability has been studied. It has been determined that the volume of gaseous thermolysis products increases by 260% in the case of n-nonanol and 80% in the case of n-decanol compared to non-irradiated solutions. It has been shown that the gas evolution rate and gas volume increase when the irradiated mixture saturated with nitric acid is heated. However, there are no prerequisites for the development of autocatalytic oxidation.