• Journal of Ocean Engineering and Technology
• /
• v.22 no.1
• /
• pp.37-45
• /
• 2008

The purpose of this study is to quantify the settling velocities of cohesive sediments from Han estuary and to evaluate their local variation within Han estuary. This study also includes an estimation of their spatial variation, for which the settling velocities of cohesive sediments from Han estuary arecompared with those for sediments from other regions. At the same time, physical-chemical properties, such as grain size distribution, the percentage of organic contents, mineralogical composition etc are measured in this study in order to examine their correlation with settling velocities and their effect on settling velocities. Results from settling tests shaw that the settling velocities of Han estuary mud varies in the range of two orders of magnitude(from 0.01 to 1.5 mm/sec) over the corresponding concentration range of 0.1 to 80 g/L, and a feature of the settling velocity profile is quite different in quantity as compared to those of previous studies for muds from other regions. Particularly in the flocculated settling region, the settling velocity for Han estuary muds is shown to be larger than that of Saemankeum and Keum estuary sediments, while in the hindered settling region all three sediments are shown to have a similar settling velocity. However, local variability of the settling velocities within Han estuary is shown to be insignificant.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.2
• /
• pp.161-175
• /
• 2008

The soil developed from volcanic ash in Jeju Island, Korea, were classified as typical Andisols. The soils had acidic pH, high water contents, high organic matters and clay-silty textures. The crystalline minerals of the samples were mainly composed of ferromagnesian minerals such as olivine and pyroxene, and iron oxides such as magnetite and hematite derived from basaltic materials. A large amount of gibbsite was found at the subsurface horizon as a secondary product from the migration of excessive aluminum. In addition, our study has shown that considerable amounts of poorly ordered minerals like allophane and ferrihydrite were present in Jeju soils. The contents of $SiO_2$ were lower than those of other soil orders, but $A1_2O_3$ and $Fe_2O_3$ contents were higher. These results are some of the important chemical properties of Andisols. The contents of heavy metals were in the range of $84{\sim}198$ for Zn, $56{\sim}414$ for Ni, $38{\sim}150$ for Co, $132{\sim}1164\;mg\;kg^{-1}$ for Cr, which are higher than the worldwide values in most of the soils. Some soil samples contained relatively high levels of Cr exceeding 1000 mg/kg. Mean reduction capacity of the Jeju soils was $6.53\;mg\;L^{-1}$ reduced Cr(VI), 5.1 times higher than that of the non-volcanic ash soils from inland of Korea. The soil reduction capacity of the inland soils had a good correlation with total carbon content (R = 0.90). However, in spite of 20 times higher total carbon contents in the Jeju soils, there was a week negative correlation between the reduction capacity and the carbon content (R = -0.469), suggesting that the reduction capacity of Jeju soils is not mainly controlled by the carbon content and affected by other soil properties. Correlations of the reduction capacity with major elements showed that Al and Fe were closely connected with the reduction capacity in Jeju soil (R = 0.793; R = 0.626 respectively). Moreover, the amounts of Ni, Co and Cr had considerable correlations with the reduction capacity (R = 0.538; R = 0.647; R = 0.468 respectively). In particular, in relation to the behavior of redox-sensitive Cr, the oxidation of the trivalent chromium to mobile and toxic hexavalent chromium can be restricted by the high reduction capacity in Jeju soil. The factors controlling the reduction capacity in Jeju soils may have a close relation with the andic soil properties explained by the presence of considerable allophane and ferrihydrite in the soils.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.277-287
• /
• 2007

To understand the effects of the powdered manganese nodule and sea bottom sediment pumped up with nodules on the mining process, the shattering ratio of manganese nodule and their physical properties are analyzed. The self shattering ratio and crushing shattering ratio are about 27% and about 3%, respectively. Then total shattering ratio is about 30%. The initial turbidity of the powdered manganese nodule and the bottom sediment show high, i.e., about 3,100 and 1,850 respectively. But their turbidities decrease rapidly with time. After 1 hour, turbidity of the powdered manganese nodule drops to about 1,570 and that of the bottom sediment to 1,310. The turbidity of Na-bentonite changes from 820 to 730 after 1 h and to 700 after 2 h. The viscosity of powdered manganese nodule is $1.4{\sim}1.5cP$, and the viscosity of bottom sediment is less than 1 cP. The viscosity fo Na-bentonite is initially 37.2 and increase with time to 86.4 cP after 30 min. The high initial turbidity of powdered manganese nodule is due to dark color of the powder. The high specific gravity makes rapid precipitation and then decreases the turbidity rapidly. The bottom sediment shows high initial turbidity because of easy suspension with very fine particle size. But it cannot be hydrated and formed gel in suspension, then it is easily precipitated. However Na-bentonite is hydrated to the expended state and makes gel state, then it shows high turbidity and high viscosity. These physical properties of the powdered manganese nodule suggest that the powder of manganese nodule should not make scaling inside of lifting pipe or pump. And the bottom sediment lifted up with manganese nodule should not play the role of drilling mud shch as Na-bentonite.

• Korean Journal of Soil Science and Fertilizer
• /
• v.1 no.1
• /
• pp.129-136
• /
• 1968

Low-Humic Gley Soils occur very commonly in Korea and constitute important paddy soils of the country. These soils are developed either on alluvial or fluvio-marine materials. The soils in the present invest igation are derived from the latter. The interesting morphological features of these two soils are the presence of $FeCO_3$ concretions in the subsoil and the occurrence of a buried black organic horizon of variable thickness(25-100 cm). The organic horizon overlies the greenish marine material and underlies the continental material. These soils have poor drainage and are wet most of the year. The presence of $FeCO_3$ concretions in poorly drained paddy soils has previously been reported in North America(8), Japan(9) and West Europe(7). The purpose of this investigation is to study the chemical and mineralogical characteristics of these soils; and the genesis of $FeCO_3$ concretions. Profile samples of both these soils were collected from Gimjae area, in co-operation with the Soil Survey Party. These profiles were described as follows:

• Economic and Environmental Geology
• /
• v.37 no.1
• /
• pp.143-151
• /
• 2004

This study focused on examining the possibility of recycling mine solid waste as environmental materials, especially for porous media. Basic properties including mineralogical compositions, chemical compositions, and particle size distribution of the tailings from the Sangdong W mine were checked. The mineralogical and chemical compositions of the tailings samples were not much different in depth. According to Korean Standard Leaching Test for Wastes(KSLT), concentrations of heavy metals leached from the tailings were below the standard values. As a result of particle size analysis, the median diameter (d$_{50}$) of the tailings was in the range of 10 to 30 ${\mu}{\textrm}{m}$. The stable tailings slurry made up of 3 ${\mu}{\textrm}{m}$ in d$_{50}$ was prepared using Attrition Mill. The milling condition was 40 vol% in slurry concentration, 700 rpm in stirring speed, and 1 hour in milling time. PEI was added as dispersing agent. Concentrated slurry was extended to 3 times by foaming method. In the case of 3 times foamed slurry, the total and open porosity of ceramic supports sintered at 1,075$^{\circ}C$ for 90 minutes was about 80% and 72%, respectively. Pore size was in the range of 30∼350${\mu}{\textrm}{m}$. Therefore, the tailings could be recycled starting material for environmental materials such as macroporous ceramic support.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.1
• /
• pp.9-21
• /
• 2012

Six serpentine mines are found in South Korea. We investigated occurrence, characteristics and origin of constituent minerals of Bibong serpentine mine in Chungcheongnam-do. We also analyzed the properties of serpentine minerals using XRD, XRF, SEM/EDS, FT-IR, EPMA and polarized microscope. The serpentinite of Bibong mine occurs as intruded body within the Precambrian metasedimentary rocks. Various minerals such as serpentine, forsterite, pyroxene, tremolite, magnetite, chlorite, mica, talc and dolomite are occurre. Five distinctive mineral assemblage types are observed in the serpentinite: (A) serpentine-forsterite, (B) serpentine, (C) serpentine-chlorite (vermiculite), (D) serpentine-tremolite, (E) tremolite-chlorite. Lizardite and antigorite are mainly occurred as serpentine minerals and chrysotile is partly included. From the study of mineral compositions and occurrence of serpentinite body, serpentine formed by hydrothermal alteration of ultramafic rock consisting mainly of forsterite, and altered minerals such as chlorite and tremolite subsequently formed by secondary hydrothermal alteration.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.2
• /
• pp.135-145
• /
• 2015

In order to predict the deterioration of stone monument due to acid fog, an artificial fog test using pH4.0 and pH5.6 was applied to the Gyeongju Namsan granite, decite and marble. After the test had weathered Gyeongju Namsan granite a larger weight reduction due to acid fog than fresh one. Decite has shown the most significant changes among the tested rocks with about 0.005 % of weight reduction. Decite and weathered granite will have considerable weight reduction due to acid rain than the acid fog, whereas the marble was expected to show a weight reduction regardless of the phase of water. The porosity and water absorption rate of weathered granite had significantly increased. This result means that the weathered rock is predicted to be more susceptible to acid fog than the fresh rock. The absorption rate of the marble after the test had shown approximately 50 % increase. The color of the samples had slightly changed towards yellow, such tendency was greater shown in weathered rocks. The marble reacted with acid fog had an increased whiteness. A large amount of cation in the samples is caused mainly by the dissociation of minerals through the reaction with acid fog.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.3
• /
• pp.271-281
• /
• 2008

The "Noerog", a traditional green mineral pigment occurs as veins or cavity-filings in the basaltic pyroclastic rocks of Quaternary Epoch in Mt. Noeseong in Janggi-myeon, Pohang. The "Noerog stone" mainly consists of celadonite with minor chlorite/smectite, mordenite and opal. Celadonite grains are several hundreds to several tens of ${\mu}m$ in size. The particle sizes under several tens of fm are likely to coagulate to aggregates. The coloring rate increases rapidly with decreasing particle size under $71{\mu}m$. The hiding power is maximum in the particle sizes of $0.2\sim0.3{\mu}m$. The resistance properties of the Noerog to both the light and the bacteria are absolutely superior to ordinary chemical pigments. The transparency of the Noerog is maximum in the nano-powders under 200 nm. Examination of the color of the Noerog pigment which has been prepared by traditional technique for "dancheong" shows that the best coloring effect is found in the particle sizes under $32{\mu}m$ and that the painting was not successful for the Noerog of particle size over $32{\mu}m$.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.4
• /
• pp.271-281
• /
• 2014

The physicochemical properties of clay minerals have been investigated at the atomistic to nano scale. The microscopic studies are often challenging to perform by using experimental approaches alone. In particular, hydroxyl groups of octahedral sheets in 2:1 clay minerals have been hypothesized to impact the sorption process of metal cations; however, X-ray based techniques alone, a common tool for mineral structure examination, cannot properly test the hypothesis. The current study has examined whether computational mineralogy techniques can be applied to examine the hydroxyl structures of clay minerals. Based on quantum-mechanics and molecular-mechanics computational methods, geometry optimizations were carried out for representative dioctahedral and trioctahedral phyllosilicate minerals. Both methods well reproduced the experimental lattice parameters; however, for structural distortion occurring in the tetrahedral or octahedral sheets, molecular mechanics showed significant deviations from experimental data. The orientation angle of the hydroxyl with respect to (001) basal plane is determined by the balance of repulsion between the hydroxyl proton and Si cations of tetrahedral sites; the quantum-mechanics method predicted $25-26^{\circ}$ for the angle, whereas the angle predicted by the molecular-mechanics method was much higher by $10^{\circ}$ (i.e., $35^{\circ}$). These results demonstrate that computational mineralogy techniques are a reliable tool for clay mineral studies and can be used to further elucidate the roles of hydroxyls in metal sorption process.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.1
• /
• pp.13-22
• /
• 2009

The study area is a tunnelling section passing through the Yangsan Fault zone. Kyungbu express highway and national road 35 are located above the tunnel. Previous study showed that fault gouge and fault breccia were widely distributed in the tunnelling section with a maximum width of 100 m. From the present study, it is found that sedimentary rocks consisting mainly of shale are distributed at the eastern block of the Yangsan Fault and these rocks are not subject to mechanical fracturing and hydrothermal alteration. On the other hand, dacitic tuff distributed at the western block of the Yangsan Fault is largely affected by mechanical fracturing and hydrothermal alteration. The large fault zone of $50{\sim}130m$ width was formed by complex processes of mechanical fracturing and hydrothermal alterations such as chloritization, sericitization, and kaolinization. Based on the characteristics of mechanical fracturing and hydrothermal alterations, the Yangsan fault zone in the study area is geotechnically classified as four zones: unaltered zone, altered zone, altered fractured zone, and fault gouge zone. These zones show different degrees and aspects in mechanical fracturing and hydrothermal alterations, resulting in different engineering properties.