• 한국재료학회지
• /
• 제22권9호
• /
• pp.494-498
• /
• 2012

Geopolymer cements and geopolymer resins are newly advanced mineral binders that are used in order to reduce the carbon dioxide generation that accompanies cement production. The effect of additives on the compressive strength of geopolymerized class-F fly ash was investigated. Blast furnace slag, calcium hydroxide($Ca(OH)_2$), and silica fume powders were added to fly ash. A geopolymeric reaction was initiated by adding a solution of water glass and sodium hydroxide(NaOH) to the powder mixtures. The compressive strength of pure fly ash cured at room temperature for 28 days was found to be as low as 291 $kgf/cm^{-2}$, which was not a suitable value for use in engineering materials. On the contrary, addition of 20 wt% and 40 wt% of blast furnace slag powders to fly ash increased the compressive strength to 458 $kgf/cm^{-2}$ and 750 $kgf/cm^{-2}$, respectively. 5 wt% addition of $Ca(OH)_2$ increased the compressive strength up to 640 $kgf/cm^{-2}$; further addition of $Ca(OH)_2$ further increased the compressive strength. When 2 wt% of silica fume was added, the compressive strength increased to 577 $kgf/cm^{-2}$; the maximum strength was obtained at 6 wt% addition of silica fume. It was confirmed that the addition of CaO and $SiO_2$ to the fly ash powders was effective at increasing the compressive strength of geopolymerized fly ash.

• 한국수자원학회논문집
• /
• 제40권9호
• /
• pp.723-734
• /
• 2007

본 연구는 점착성 퇴적물 예측에 가장 중요한 인자인 침강속도를 강 항만 저수지 그리고 호수에 녹아있는 이온 $(Na^+,\;Cl^-,\;OH^-,\;H^+)$의 첨가 및 밀도의 변화 아래 실시되었다. 정수 중에 부유된 미립자(alumina와 quartz)의 침강 속도는 압력센서(최대 10 mbar)로 측정되었다. 초기 농도 20 g/l에서 alumina와 quartz의 평균 침강속도는 미립자의 응집현상 때문에 최고 값을 보였으며, 이때 각각 최대 평균 침강속도는 0.185 mm/s(alumina)와 0.022 mm/s(quartz)이다. 그 후 증가된 초기농도일 경우 간섭침강 때문에 침강속도는 감소하였다. 또한 증가된 염분에서 두 미립자의 평균속도는 증가하였다. 더구나 alumina의 평균 침강속도는 산성에서 감소하다가 알칼리성에서는 강한 응집현상 때문에 높게 측정되었다. 그러나 quartz의 평균 침강속도는 알칼리성에서 낮은 값을 보였다.

• 한국재료학회지
• /
• 제15권3호
• /
• pp.177-182
• /
• 2005

Large amounts of the waste SiC sludge containing small amounts of Si and organic lubricant were produced during the wire cutting process of the single silicon crystal ingots. The waste SiC sludge was purified by the washing process and the purified SiC powders were used to fabricate continuously porous $SiC-Si_3N_4$ composites using a fibrous monolithic process, in which carbon, $6wt\%\;Y_2O_3-2\;wt\%\;A1_2O_3$ and ethylene vinyl acetate were added as a pore-forming agent, sintering additives, and binder, respectively. In the burning-out process, carbon was fully removed and continuously porous $SiC-Si_3N_4$ composites were successfully fabricated. The green bodies containing SiC, Si particles and sintering additives were nitrided at $1410^{\circ}C$ in a flowing $N_2+10\%\;H_2$ gas mixture. Continuously porous composites were combined with SiC, ${\alpha}Si_3N_4,\;\beta-Si_3N_4$ and a few $\%$ of Fe phases. The pore size of the 2nd and the 3rd passed $SiC-Si_3N_4$ composites was $260\;{\mu}m$ and $35\;{\mu}m$ in diameter, respectively.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.230-235
• /
• 2001

There are more than 15 millions cars or motors in Taiwan. According to the statistics from Environmental Protection Administration, the number of resulting scrap tires are near 110 thousand tons each year. The tire recycle programs in Taiwan were first conducted in 1989 and executed by ROC Scrap Tire Foundation. However, the current efficiency of the tire recycling industry still needs to be improved to minimize the environmental problem or fire hazards caused by scrap tires storage. Ten major tire-recycling factories are surveyed in this study. The investigations include the source of scrap tire, the shredding process, the market of products, the management of wastes disposal, and the difficulties of these sectors. As the varieties of the shredding machines of the recycle factories, there are three kinds of final products which include powder, granular, and chips. The wastes, wires and fibers, produced by the shredding process are the major problems fur all the factories. The percentage of the wire and fiber removal from rubbers still needs to be increased. The best approaches found in this study to increase the efficiency of scrap tire recycling processes are proposed which include the improvement of magnetic separation system fiber/rubber separation system and the minimization of waste disposal. A categorized standard of the processing outputs is suggested as a reference for the decision-making of the tire-recycling factories.

• 한국결정성장학회지
• /
• 제10권3호
• /
• pp.264-270
• /
• 2000

소결광을 구성하는 광물상(hematite, magnetite, calcium ferrite, slag)들을 X선 내부표준법을 이용하여 정량분석을 하였다. 분석에는 표준물질로 NaF와 SiO$_2$를 선택하여 교정곡선을 작성하여 내부표준법에 적용하였다. 소결광내에 존재하는 calcium ferrite는 순수 CF(CaO.$Fe_2$$O_3$에 X선 회절피크는 나타나지 않았으며, 순수 $CF_2(CaO.$2Fe_2$$O_3$)에 근접하였으나 CF2에 소량의 $Al_2$$O_3$와 $SiO_2$가 고용된 4원계($Fe_2$$O_3$-CaO-$AI_2$$O_3$-$SiO_2$)에 보다 더 근접한 것으로 나타났다. 합성소결광의 정량분석은 두 표준물질 모두 상대오차가 $\pm$5 wt% 내에서 일치하였다. 실제 소결광의 정량분석결과 hematite는 27~40 wt%, magnetite는 20~30 wt%, calcium ferrite 22~33 wt%, slag 10~20 wt% 범위에서 분포하였다.

• 자원리싸이클링
• /
• 제27권3호
• /
• pp.58-65
• /
• 2018

국내 순환유동층보일러형 발전소에서 발생하는 석탄재의 재활용을 위해 석회석 미분말과 CFBC 비산재를 이용하여 0.2~0.4 mm 크기를 가지는 석회계 흡수제를 제조하였다. 석회계 흡수제에 소석회를 소량 혼합한 결과 칼슘실리케이트 성분이 입자 표면에 형성되어 강도가 향상되었으며, 탈황특성을 비교한 결과 상업적으로 사용되고 있는 로내탈황용 석회석보다 약 10% 정도 높은 전환율을 가진 것으로 나타나 탈황 흡수제로 활용 가능함을 확인하였다.

• 한국축산식품학회지
• /
• 제37권4호
• /
• pp.486-493
• /
• 2017

The effects of slaughter age (28, 32, or 38 mon) on the proximate composition, collagen content, fatty acid composition, amino acid content, and mineral contents of horse leg bone (femur and tibia) extracts (HLBE) obtained from Jeju crossbred horses (n=14) in Korea. HLBE was extracted for 24 h with boiling water. At those ages, the respective proximate compositions of the HLBE were found as follows: 5.20-6.42% crude protein; fat 0.61-1.65% crude; and 0.10-0.22% crude ash. At 32 and 38 mon, the HLBE showed higher levels of both crude protein and collagen than at 28 mon. The major fatty acids of the horse leg bone extract powder (HLBP) were palmitic acid and oleic acid. Palmitoleic acid and the essential fatty acids were higher in the HLBP at 38 mon compared to that at 28 mon. Nearly all the amino acids were found at higher levels in the HLBP at 38 mon than at 28 mon, except histidine. The P, K, Zn, Se and Fe contents in the HLBP increased significantly with age. These results suggest that some nutrients in the HLBE increase with age, and that extracts from horses older than 32 mon would be more nutritious for human consumers.

• 한국식품위생안전성학회지
• /
• 제6권3호
• /
• pp.139-145
• /
• 1991

한국인의 상용 식품 중, 특히 가공식품의 Na 함량에 대한 원자흡광분광 광도계의 분석결과는 다음과 같다. 1. 곡류 중 라면류의 Na 함량은 400~900mg/100g이고 스푸의 Na 함량은 10000~16000 mg/100g으로 아주 높았다. 3.서류, 두류의 Na 함량은 매우 낮았으나 이를 가공한 flake나 두유는 Na 함량이 높았다. 4. 채소류의 Na 함량도 매우 낮아쓴데 이를 조리한 방법에 따라 김치, 오이지, 무침의 Na 함량은 높게 나타났다. 5. 육류의 Na함량은 40!60mg/100g으로 비교적 낮았지만 육류가공품은 대부분이 700~1300mg/100g으로 육류가공품보다 다소 높았다. 7. 우유의 Na 함량은 30~60 mg/100g의 수준이었고 마아가린이 다소 높은 300~600 mg/100g 정도였다. 8.음료류의 Na 함량은 전반적으로 매우 낮았다. 9. 당류의 Na 함량은 맛소금, 고추장, 된장, 간장의 함량이 높아 맛소금은 12000~38000mg/100g, 장류는 3000~6000mg/100g이었다. 조미소의 Na 함량은 8000~17000 mg/100g으로 매우 높아 장류보다도 높게 나타났다. 11. 모든 식품군에서 분석방법간 NA 함량의 차이는 유의하지 않은 것으로 나타났으나 개별 식품으로 볼 때 함량이 낮은 경우는 그 차이가 많았다.

• The Journal of Advanced Prosthodontics
• /
• 제6권6호
• /
• pp.528-538
• /
• 2014

PURPOSE. The purpose of this prospective study was to evaluate the effectiveness of newly developed autogenous tooth bone graft material (AutoBT)application for sinus bone graft procedure. MATERIALS AND METHODS. The patients with less than 5.0 mm of residual bone height in maxillary posterior area were enrolled. For the sinus bone graft procedure, Bio-Oss was grafted in control group and AutoBT powder was grafted in experimental group. Clinical and radiographic examination were done for the comparison of grafted materials in sinus cavity between groups. At 4 months after sinus bone graft procedure, biopsy specimens were analyzed by microcomputed tomography and histomorphometric examination for the evaluation of healing state of bone graft site. RESULTS. In CT evaluation, there was no difference in bone density, bone height and sinus membrane thickness between groups. In microCT analysis, there was no difference in total bone volume, new bone volume, bone mineral density of new bone between groups. There was significant difference trabecular thickness ($0.07{\mu}m$ in Bio-Oss group Vs. $0.08{\mu}m$ in AutoBT group) (P=.006). In histomorphometric analysis, there was no difference in new bone formation, residual graft material, bone marrow space between groups. There was significant difference osteoid thickness ($8.35{\mu}m$ in Bio-Oss group Vs. $13.12{\mu}m$ in AutoBT group) (P=.025). CONCLUSION. AutoBT could be considered a viable alternative to the autogenous bone or other bone graft materials in sinus bone graft procedure.

• 한국세라믹학회지
• /
• 제54권2호
• /
• pp.108-113
• /
• 2017

The use of aluminum-based coagulants in water pretreatment is being carefully considered because aluminum exposure is a risk factor for the onset of Alzheimer's disease. Lightly burned-dolomite kiln dust (LB-DKD) was evaluated as an alternative coagulant because it contains high levels of the healthful minerals calcium and magnesium. An organic pore forming agent (OPFA) was incorporated to prepare porous granules after OPFA removal through a thermal decomposition process. A spray drying method was used to produce uniform and reproducible spherical granules with low density, since fine dolomite particles have irregular agglomeration behavior in the hydration reaction. The use of fine dolomite powder and different porosity granules led to a visible color change in raw algae (RA) containing water, from dark green to transparent colorlessness. Also, dolomite powders and granules exhibited a mean removal efficiency of 48.3% in total nitrogen (T-N), a gradual increase in the removal efficiency of total phosphorus (T-P) as granule porosity increased. We demonstrate that porous dolomite granules can improve the settling time and water quality in summer seasons for the emergent treatment of excessive algal blooms in eutrophic water.