• Journal of Energy Engineering
• /
• v.27 no.1
• /
• pp.76-80
• /
• 2018

The objective of this research paper is to discuss the waste coffee residue disposal and its environmental effects on the environment. As we know, coffee is one of the most demand and swallowed beverages in the world, which leads to large quantities of solid waste. Which can be toxic and a lot of environmental problems occur. In developing countries, there is a lack of proper coffee waste residue management. The coffee beans and residues contain several organic compounds. The wastewater from coffee industry emitted several pollutants (highly concentrated) and it contaminates the soil, ground waters, aquatic life, and also human health. Hence it is essential to treat the coffee waste residues. Mean while, oyster shell waste and its disposal also a big environmental challenge in the coastal regions of southeast Korea. In this paper, we focused the treatment of coffee waste residue with oyster shell waste powder. Primarily, oyster shells are calcinated at higher temperatures and investigated the calcined CaO powder as an anti microbic agent to the bacteria presented in coffee waste residues. We successfully applied calcium oxide from oyster shell waste, as an antimicrobic agent.

• Journal of the Korean Ceramic Society
• /
• v.37 no.10
• /
• pp.933-937
• /
• 2000

고기능성 전자재료용 TiO$_2$분말 및 박막제조에 사용되는 중간생성물인 TiCl$_4$는 99% 이상의 고순도가 요구된다. 고순도.미립의 TiO$_2$분말 및 TiCl$_4$는 황산법으로 제조한 저순도 TiO$_2$원료를 사용하여 염소화법으로 Ti-염화물 및 염화불순물로 제조한 후, 대부분의 염화불순물들은 3단계 과정을 거쳐 고순화 하였다. 대부분의 염화불순물은 분리.응축 및 분별증류로, VOCl$_3$는 mineral oil을 첨가하여 비등점을 변화시켜, 그리고 미량의 염화불순물은 열가수분해하여 침전시킨 후 유기용제 처리하여 제거하였다. 유기용제 처리는 TiO$_2$분말의 고순도화에 도움이 되었으며, 입자간의 응집을 적게 하여 TiO$_2$입자크기도 작아졌다. 또한 anatase에서 rutile 결정구조로의 전이온도도 낮아지는 부수적인 효과를 보였다.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.105-110
• /
• 1998

In the make-up product, Eye-shadow products have several purposes of enhancing product quality such as providing the beauty (variation of shape, clean appearance), feeling, continuity and adhesion. In this paper, newly developed wet type back injection press process is introduced so as to increase higher value products which providing various the beauty. The solvent takes an essential role to provide the fluidity of the powder bulk during the pressed-process of wet type pressed product. In this study, the effect of solvent in the oil binder was investigated, And the higher quality condition of the wet type pressed product was built to apply cosmetic preparation. Firstly, the system was designed powder phase as non treated pigment. The oil binder phase is categorized as hydrocarbons(Mineral oil, Squalane), Silicones(Methicone, Dimethicone ), esters (Octyldodecanol, Octyl Dodecyl Myristate). The solvent phase used was C 7-8 isoparaffin and Isopropyl Alcohol. The interaction of oil binder and solvent is investigated by measuring mass of final oil binder and the each solubility parameter. It was found that the higher the solubility the higher the degree of change in the final composition of the oil binder. In order to maintain the quality of the final product, the solvent used in pressed-process should be hydrophobic with oil binder.

• KCI Concrete Journal
• /
• v.11 no.3
• /
• pp.79-88
• /
• 1999

Most difficulties of inducing high fluidity on the concrete mixing design with a strength range of 210 to 240kg/$\textrm{cm}^2$ result from the segregation of aggregates due to the shortage of cementitious binders. To solve the problem, this study concentrated on finding the optimized amount of binder material which does not affect the concrete strength and is also economical. Also there were studies on the use of intermediate sized aggregates to avoid the gap-grading between coarse and fine aggregates so that the material segregation in high flowing concrete was and minimalized the fluidity and penetration capacity of the reinforcing bars was enhanced. Throughout the parametric study with respect to water/binder ratio. superplasticizer. replaceable mineral admixture, the size of coarse aggregate and mixing methods, the effect of each constituent on the characteristics of high flowing concrete could be observed. As a result or partially using stone powder or an intermediate class of aggregate (max. diameter 13mm) . it was fund that the fluidity of concrete significantly increased without material segregation and any change of compressive strengths. It was also proved in this study that proper mixing time and speed are significant factors influence the performence of high flowing concrete.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.1
• /
• pp.10-14
• /
• 1994

The slowly released potassium fertilizer was developed by mixing fly ash with KOH, anthracite coal powder, KCI, $K_2CO_3$ and $Mg(OH)_2$ as the substances for accelerating calcination. Measuring proper ratios of raw materials, we found that the anthracite coal powder was 12 percent and $Mg(OH)_2$ was two to three percent. The optimal calcination temperature and time were proved to be $850^{\circ}C$ and 30 minutes, respectively, however, the trial product with lower temperature and shorter time in calcination had low quality. The K solubility of the product was very low compared to that of the KCl fertilizer.

• Preventive Nutrition and Food Science
• /
• v.2 no.2
• /
• pp.89-95
• /
• 1997

The comparative effects of gamma irradiation an ozone treatment on the microbiological and physicochemical qualities were investigated for the improvement of hygienic quality of aloe powder and bee pollen. Gamma irradiation at 7.5~10kGy could reduce total aerobic bacteria, molds and coliforms below detection levels, but ozone treatment up to 18 ppm for 8hr was not sufficient to eliminate the microorganisms from aloe powder and bee pollen. The physicochemical properties such as fatty acid an amino acid compositions, mineral content, TBA value, barbaloin and pigment contents were not significantly changed by gamma irradiation, whereas ozone treatment caused significant changes in fatty acid composition, lipid oxidation and destruction of barbaloin and natural pigments.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.2
• /
• pp.181-191
• /
• 2024

In the realm of cement manufacturing, concerted efforts are underway to mitigate the emission of greenhouse gases. A significant portion, approximately 60%, of these emissions during the cement clinker sintering process is attributed to the decarbonation of limestone, which serves as a fundamental ingredient in cement production. Prompted by these environmental concerns, there is an active pursuit of alternative technologies and admixtures for cement that can substitute for limestone. Concurrently, initiatives are being explored to harness technology within the cement industry for the capture of carbon dioxide from industrial emissions, facilitating its conversion into carbonate minerals via chemical processes. Parallel to these technological advances, economic growth has precipitated a surge in construction activities, culminating in a steady escalation of construction waste, notably waste concrete. This study is anchored in the innovative production of calcium silicate cement clinkers, utilizing finely powdered waste concrete, followed by a thorough analysis of their mineral phases. Through X-ray diffraction(XRD) analysis, it was observed that increasing the substitution level of waste concrete powder and the molar ratio of SiO₂ to (CaO+SiO₂) leads to a decrease in Belite and γ-Belite, whereas minerals associated with carbonation, such as wollastonite and rankinite, exhibited an upsurge. Furthermore, the formation of gehlenite in cement clinkers, especially at higher substitution levels of waste concrete powder and the aforementioned molar ratio, is attributed to a synthetic reaction with Al₂O₃ present in the waste concrete powder. Analysis of free-CaO content revealed a decrement with increasing substitution rate of waste concrete powder and the molar ratio of SiO₂/(CaO+SiO₂). The outcomes of this study substantiate the viability of fabricating calcium silicate cement clinkers employing waste concrete powder.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.4
• /
• pp.253-263
• /
• 2011

Mineralogical characteristics of garnierite ores from the Nakety, Kouaoua, and Ouaco Ni laterite deposits in New Caledonia are investigated using optical microscopy, powder X-ray diffractometer, and electron proble microanalyzer. Green garnierite ores have colloform, cellular, and boxwork texture, which are formed by precipitation under low temperature surface environment. They are mainly composed of Ni-bearing talc~willemseite series mineral and partly of lizardite. In Ni-bearing talc~willemseite series mineral, NiO contents are Ouaco (average 40.63%), Nakety (average 28.58%), and Kouaoua (average 24.90%), in descending order. Ni atomic percentage replacing Mg in octahedral site are 43.5~85.0%. Dark brown garnierite ores show cellular or boxwork texture, and consist of lizardite~Ni lizardite with some Ni-bearing talc~willemseite series mineral. Ni contents in lizardite~Ni lizardite are 1.14~4.06 wt. % and Ni atomic percentage replacing Mg in octahedral site 1.7~6.8%. Low NiO content in dark brown garnierite attributes to high Fe content replacing Mg in octahedral site.

• Journal of the Korean Ceramic Society
• /
• v.40 no.8
• /
• pp.804-810
• /
• 2003

The fine powder produced by heating and grinding of the waste concrete in the waste construction was investigated whether utilize as substitution raw material of SiO$_2$, CaO, and Al$_2$O$_3$ source for OPC clinker manufacture is possible or not. In order to synthesize OPC clinker, limestone, shale, converter slag and fly ash were used as main raw materials, and modulus was fixed LSF 91.0, SM 2.60, IM 1.60. The synthesized clinkers were characterized. The Main products of synthesized clinker were C$_3$S, ${\beta}$-C$_2$S, C$_3$A, C$_4$AF as OPC clinker at 1,43$^{\circ}C$. As a result of TG-DTA and burnability index(B.U) analysis of each raw mixtures, the formation temperature of clinker phases was similar and B.I was showed easy burning as 48.6∼51.4.

• Journal of Digital Convergence
• /
• v.18 no.8
• /
• pp.311-319
• /
• 2020

The purpose of this study was to investigate the effects of mineral taping containing natural minerals powder on knee joint pain and swelling in the elderly. Forty elderly people with knee pain were divided into 20 mineral taping groups and 20 kinesio taping groups and randomly placed in a single blind manner. The study period was conducted from April 6, 2020 to April 7, 2020, and pain and blood flow by time point were examined before, after, and after 1 day of taping. Knee pain was significantly different in the post-test (F = 93.758, p <.001) and the post-day test (F = 93.758, p <0.001) for each measurement point. The blood flow test for edema was significantly different in the post-test (F = 48.648, p <0.001) and the post-day test (F = 35,427, p <0.001) for each measurement time point. There was no significant difference in the effect test result for each group (F = 0.160, p> 0.05). However, When comparing the retention effect after 1 day, the mineral taping group was excellent to the post-score than the Kinesio taping group. In the future, we believe that increasing the taping time and retention period will have a positive effect. It is thought that the results of this study will contribute to the study of taping materials in the future.