• Computers and Concrete
• /
• v.20 no.3
• /
• pp.283-290
• /
• 2017

The aim of this study is to investigate the effect of the bond strength of self-compacting mortars (SCMS) produced from ground pumice powder (GPP) as a mineral additive. In this scope, six series of mortars including control mix were prepared that consist of 7%, 12%, 17%, 22% and 27% of ground pumice powder by weight of cement. A total of 54 specimens of $40{\times}40{\times}160mm$ were produced and cured at the age of 3, 28 and 90-day for compressive and tensile strength tests and 18 specimens of $150{\times}150{\times}150mm$ mortar were prepared and cured at 28 days for bond strength tests. Flexural tensile strength and compressive strength of $40{\times}40{\times}160mm$ specimens were measured at the curing age of 7, 28 and 90-day. Mini V-funnel flow time and mini slump flow diameter tests were also conducted to obtain rheological properties. As a result of the study, it was observed that the SCMs containing 12% of GPP has the highest bond strength as compared to control and GPP mortars. Compressive strength slightly increased up to 12% of GPP.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.1
• /
• pp.140-144
• /
• 1999

The physicochemical and organoreptic characteristics of hamburger patties with 1~5% powder of Sargassum thunbergii(ST) or Gelidium amansii(GA) were investigated. The addition of seaweed powder resulted in significant changes of L, a and b values of the patty. Water content of the patty increased with GA but not changed with ST. As increasing the amount of the powder, more cooking yield was observed. Na was the most abundant mineral, followed by Ca, Mg, Fe and Zn. The hamburger patty with 3% GA showed similar sensory scores of color and overall acceptability to control.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.4
• /
• pp.239-246
• /
• 2008

This research tried to find out the optimum fabrication method of calcined clay granules comprising zeolite. Kaolin clay and natural zeolite powder were used as raw materials of calcined clay, and silica stone powder was used for controlling the porosity of the granules. The granulation was performed with two kinds of granulators: a pan granulator and a high-shear mixer granulator. Various granules were fabricated by the mixing ratios and the rotation speeds of the granulators, and were heated from 400 to $700^{\circ}C$ at $100^{\circ}C$ interval. The crushing strength, pore size distribution, and CEC of the granules were measured. The evaluation method for the resistance of granules to human treading was created and the tests were conducted at dry and wet conditions. The resistance and crushing strength improved in proportion to the rotation speed of the granulator and the heating temperature, but the CEC decreased. The pellet made by the pan granulator did not have the strength against treading upon heating to below $700^{\circ}C$, but the pellet made by the high-shear mixer granulator endured the treading test upon heating to over $500^{\circ}C$

• Journal of Periodontal and Implant Science
• /
• v.30 no.3
• /
• pp.527-538
• /
• 2000

Several extraction cases with advanced bone loss as a result of periodontal disease, root or labial bone fracture, extensive caries, and periapical lesions occur esthetic, functional problems and severe bone loss. Therefore, to treat these cases used several surgical methods and socket preservation among this therapies have been evaluated simple, effective and good prognosis in the implant placement. Socket preservation therapy have been used with barrier membranes or/and graft materials. Deproteinized bovine bone mineral have been evaluated ideal grafting materials. Recently, calcium-phosphate thin film coated bovine bone powders were developed in our country, but the study for these material wasn't reported. When two types of xenograft materials were implanted in extraction sockets of Beagle dogs, the effects of these were analyzed after 4 weeks and 8 weeks histological views. The results of this study were as follows. 1. In control groups, 4 weeks after implantation, the extraction sockets were filled with connective tissue which has dilated vessels and epithelial growth. And after 8 weeks, irregular connective bundles were observed. But new bone formation was not seen. 2. In Bio-Oss groups, epithelial growth was not seen and bone powder was covered with connective tissue fiber. New bone formation was found around the interproximal bone. There was no special change seen after 8 weeks, connective tissue fibers became more regular, and bone growth near bone powder was not made well. 3. In Ca-P BBP groups, epithelial cells didn't grow in the extraction sockets, there was a lot of new bone made around the bone powder after 8 weeks, new bone around bone powder was replaced with mature bone. It is thought that bone powder grafting into the extraction sockets is very useful for conservation of ridge, and Ca-P BBP is more effective in bone formation than Bio-Oss.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.1
• /
• pp.40-46
• /
• 2007

A qualitative investigation Dongchunghacho, Jelly combined with sericultural products prepared from assorted increments(0.5, 1, 1.5 and 2%) of P. japonica powder was performed. The qualitative parameters used to assess P. japonica powder increments included, hysicochemical, textural and sensory properties. The moisture and crude protein content of the Dongchunghacho Jelly were significantly greater than the control(p<0.05). Conversely, Dongchunghacho Jelly showed a propensity towards lower crude fat content than the control group. A positive trend was observed for both mineral content and dark color with increased P. japonica powder. In contrast, texture, hardness, gumminess and chewiness of the Dongchunghacho Jelly decreased with increasing levels of P. japonica powder. Color, taste, texture and overall preference of Dongchunghacho Jelly were optimal in the 1 % P. japonica powder mixture.

• Journal of Digital Contents Society
• /
• v.14 no.1
• /
• pp.35-40
• /
• 2013

The use of slurry with a mix of abrasives and coolant for making Wire Saw in the photovoltaic industry has sharply increased with the semiconductor wafer. In this paper, the slurry was isolated, purified and dried by microwave drying method with high-purity silicon carbide powder obtained through chemical processing. Dried slurry bulk was first pulverized and chemical treatment was applied to produce powder. The produced slurry powder was then analyzed by going through the following analysis; thermal analysis, particle size analyses: SEM shots, elemental analysis, XRF and XRD. The results of this study found the recovery rate of the power obtained though the chemical processing to be higher than the one obtained from mineral processing. The results anticipate infrastructure building and active responses to increasingly stronger domestic and international environmental regulations through the integration and recycling of large amounts of slurry in the photovoltaic industry.

• Advances in concrete construction
• /
• v.5 no.1
• /
• pp.65-74
• /
• 2017

This study was focused on the use of partial replacement of cement with glass powder in high strength concrete and also copper slag as a partial replacement of coarse sand in concrete. The high strength concrete was prepared with different mineral admixtures like silica fume, fly ash and rice ash husk in different proportions. An experimental investigation has been carried to study about the effect of glass powder on high strength copper slag concrete. The range of glass powder was 10%, 15% and 20% as a replacement of cement. The range of copper slag was 0%, 20%, 40% and 60% as a replacement of natural sand. In addition to the different percentage of fly ash, silica fume, and rice husk ash 5% and 10% was also studied in copper slag concrete. Thus, a total of 51 cubes were casted and compressive strength test was performed on them. The result of the study shows that the value of average compressive strength of concrete after addition of 10%, 15% and 20% of glass powder are 70.47, 72.01 and 73.31 respectively. The value of average compressive strength after addition of 20%, 40% and 60% copper slag as a replacement of sand are 72.18, 74.38 and 73.08 respectively. The value of average compressive strength after addition of 5% and 10% fly ash as a replacement of cement are 71.56 and 73.22. The value of average compressive strength after addition of 5% and 10% silica fume as a replacement of cement are 72.33 and 73.53. The value of average compressive strength after addition of 5% and 10% rice husk ash as a replacement of cement are 72.86 and 69.49. At the level of 20% replacement of cement by glass powder meets maximum strength as compared to that of controlled concrete and copper slag high strength concrete.

• Human Ecology Research
• /
• v.62 no.2
• /
• pp.327-336
• /
• 2024

This study was investigated to examine the antioxidant activity and quality characteristics of ginger Jocheong added with Gujeung-gupo ginger powder and the results were as follows. As the amount of Gujeung-gupo ginger powder added into ginger Jocheong increased, the moisture and carbohydrate contents of ginger Jocheong significantly decreased(F=133.33, p<.001) and increased(F=36.15, p<.001), respectively. The content of mineral composition such as K, Ca and Zn showed higher values as the amount of added Gujeung-gupo ginger powder increased. As the amount of Gujeung-gupo ginger powder added into ginger Jocheong increased, sweetness(F=200.00, p<.001), viscosity(F=441.23, p<.001), L value(F=1,458, p<.001), a value(F=44.56, p<.001) and b value(F=203, p<.001) decreased significantly, and pH significantly increased(F=59.18, p<.001). As the amount of Gujeung-gupo ginger powder added into ginger Jocheong increased, total polyphenol content(F=86.015, p<.001), total flavonoid content(F=885.012, p<.001), and DPPH radical scavenging activity(F=75.136, p<.001), ABTS radical scavenging ability(F=145.751, p<.001), and FRAP activity(F=172.242, p<.001) increased. From the above results, the antioxidant activity and quality characteristics of ginger Jocheong added with Gujeung-gupo ginger powder confirmed the potential development of ginger Jocheong with high antioxidant activity.

• Biomedical Science Letters
• /
• v.11 no.3
• /
• pp.275-279
• /
• 2005

High-salted mineral water (Daehan Deep Water, Korea) that is pumped up from below the sedimentary rock layer of Dadaepo, Busan, Korea has a composition similar with that of deep sea water. Under the well-being boom, the mineral water is processed for various uses including washing or oral administration. However, high concentrations of various minerals in the mineral water are suspected to affect on the physiology of human body, especially on blood pressure (BP). Here, we examined the effect of Hot Mineral(R), dried powder of the mineral water, on the change of BP. Sprague­Dawley rats were grouped and orally administered $2.5\%$ Hot Mineral(R) (group M), $2.5\%$ NaCl (group S) or normal water (group C). Excreted urine was collected in metabolic cage for 24 hours. The systolic blood pressure (SBP) of the group S was remarkably increased (P<0.005) compared with that of the group M and the group C, which showed little changes of the SBP during 2 weeks. While average daily sodium intake were 0.32 mg in the group C, 6.64 mg in the group M and 4.07 mg in the group S, average daily sodium excretion were 11.37 mg, 53.70 mg and 7.75 mg, respectively. These results indicate that the sodium excretion in the group M was much higher than the other two groups. In this study, we suppose that the plenty amount of minerals such as calcium, potassium and magnesium in Hot Mineral? have an effect not to increase the SBP and to prompt sodium excretion out of the body. Therefore, these results suggest that oral administration of appropriate amount of Hot Mineral(R) for limited period does not induce increased SBP.

• Resources Recycling
• /
• v.20 no.4
• /
• pp.36-45
• /
• 2011

The recovery of platinum group metals (PGMs) from the leach solution of spent auto-catalyst and the wash solution of the leach residue was investigated in the laboratory scale experiments by the cementation process using metal powders as the reductant. In this study, the effect of Al, Mg and Zn powders on the cementation process was particularly examined. Aluminum powder was selected as the most suitable reductant for the cementation of PGMs. At the cementation time of 10 minute under the aluminium stoichimetric amount of 19.3 and the reaction temperature of $50{\sim}60^{\circ}C$, the recovery of platinum group metals from the leach solution of the spent auto-catalyst was found to be 99.3%, 99.4%, 90.2% for Pt, Pd and Rh, respectively. Under the same conditions with the aluminium stoichimetric amount of 45, the recovery of platinum group metals from the wash solution of the leach residue of spent catalyst was observed to be 97%, 97% and 90% for Pt, Pd and Rh, respectively. In addition, it was possible to upgrade the platinum group metals in the precipitates obtained from the cementation process by about 10% through the removal of metal impurities by the nitric acid leaching at ambient temperature.