• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.381-382
• /
• 2010

The fiber dispersion performance in fiber-reinforced cementitious composites is a crucial factor with respect to achieving desired mechanical performance. Thus, fiber dispersion of ECC incorporated by recycled mineral wastes was evaluated to more accurately predict uniaxial tension behavior.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.421-424
• /
• 2000

This paper investigates the characteristics of analytical models in prediction of sound transmission loss for the multi-layered panels with high density mineral wools. The results show that the sandwich model is more adequate to account for sound insulation performance of those panels than the poro-elastic model. In order to improve STC(Sound Transmission Class), the effect of fiber directions of mineral wools is examined, analytically and experimentally. From the comparison of the measurements with the predictions, it is evident that the vertical fiber directions of mineral wools enhance STC value up to 6 dB, compared to that of the horizontal fiber directions.

• Tribology and Lubricants
• /
• v.22 no.1
• /
• pp.1-7
• /
• 2006

The sliding friction and wear properties of mineral fiber reinforced composite(MF) and glass fiber reinforced composites(GF) are investigated to clarify their field of use and the role of each fiber in friction material. Friction and wear test reveals that GF composite has better wear resistance even though with low friction coefficient, comparing with MF composite. Glass fiber strengthen effectively the matrix and may absorb friction energy to convert it into the fracture energy of them, as well as its lubricative role. However, mineral fiber in MF composite is too small to strengthen the matrix. Then MF composite are easily plowed and worn out by asperity on counter material. Friction coefficient of MF composite is higher friction coefficient than that of GF composite and varied widely with test.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.749-754
• /
• 2002

In this study, it is investigate to influence on tile dispersion of fiber and the flowability of matrix of type and amount of superplasticizer, velocity agent, mineral admixture and steel fiber to improve for construction performance of steel fiber reinforced cementitious composites. As for the test results, it was found that the dispersion of fiber and the flowability of matrix in steel fiber reinforced cementitious composites can improve by using of properly amount and combination of superplasticizer, velocity agent, mineral admixture. Furthermore, It show that the aspect ratio of steel fiber affect the construction performance of fiber reinforced cementitious composites, and the improvement for construction performance is the more effective the smaller aspect ration of steel fiber.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.4
• /
• pp.23-31
• /
• 2020

Recently, meteorological disasters have been increasing by climate change, excessive rainfall, and landslide. The purpose is to develop new fabric concrete that can prevent and recover from damages because some of areas are vulnerable to meteorological disaster. Specifically, this technology can minimize time and space constraint when repairing the concrete structure and installing a formwork. The structure of fabric concrete is a mixture of fabric concrete and a high-speed hardened cement, Silica sand, wollastonite mineral fiber, fabric material and waterproof PVC fabric. In this study, the ratio of mechanical properties and durability of the fabric concrete mixture was evaluated by deriving the binder: silica sand mix ratio of the fabric concrete mixture and substituting part of the cement amount with wollastonite mineral fiber. Best binder in performance evaluation: Silica sand mix ratio is 6: 4 and the target mechanical performance and durability are the best when over 15% wollastonite binder is replaced by silicate mineral fiber.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.103-106
• /
• 2006

This study investigates spalling properties of 60MPa class, high performance concrete, made with the various influential parameters, such as, blaine of cement, mineral admixture and polypropylene(PP) fiber contents. Totally 21 parameters of ${\phi}100{\times}200mm$ in size was fabricated; three specimens for variance in blaine of cement, 4 specimens for combination of mineral admixture type, along with 0.05, 0.1, 0.15% of fiber adding ratio. After that, one hour unloading fire test was conducted, and then spalling appearance and spalling degree of specimens was examined. Test showed that a specimen made with high blaine of cement(H) improved early strength but exhibited similar value to a specimen made with low blaine(L) at the age of 28 days, thus indicating comparable spalling appearance. In conclusion, spalling easily occur in higher strength and smaller particle shape of cement and mineral admixture.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.2
• /
• pp.139-147
• /
• 1996

Eight Philoppine forages were studied to obtain the following: 1) nutrient concentrations and digestibility, 2) distribution of the various minerals in fiber fractions through mineral analyses of neutral detergent fiber(NDF) and acid detergent fiber(ADF) residues, and 3) correlation coefficients among the factors affecting forage quality and mineral concentrations. These Philippine forages were paragrass [Brachiaria mutica (Forsk.) Stapf], stargrass (Cynodon plectostachyum Pilger), napiergrass (Pennisetum purpureum Schumach.) calopo (Calopogonium muconoides Desv.), centrocema (Centrocema pubescens Benth.), gliricidia [Gliricidia sepium (Jacq.) Walp.] leucaena [Leucaena leucocephala (Lam.) de Wit.] and sesbania [Sesbania grandiflora (L.) Poir]. Species differences(p<0.01) were observed on various nutrient fractions including mineral composition and digestibility. The cell wall(NDF) fraction, prepared by boiling in neutral detergent solution, contained the following proportions of the total mineral originally present (%): calcium (Ca), 0.7; phosphorus(P), 14.3; magnesium(Mg), 1.9; potassium(K), 3.7; copper(Cu), 16.4; zinc(Zn), 2.9; molybdenum(Mo), 9.3; cobalt(Co), 16.2; manganese(Mn), 5.6, and iron(Fe), 81.3. The ligno-cellulose(ADF) fraction, prepared by boiling in acid detergent solution, contained the following proportions of the total mineral originally present(%): Ca, 0.2; P, 4.4; Mg, 0.7; K, 2.8; Cu, 32.3; Zn, 1.1; Mo, 8.9; Co, 4.7; Mn, 5.4; and Fe, 36.8. Correlation coefficients among the factors affection forage quality and mineral concentrations were also observed. Evidently, 75 and 45% of the minerals in grasses and legumes was positively correlated to CP and IVDMD, respectively. Moreover, 55, 80 and 75% of the forage minerals was negatively correlated to NDF, ADF and ADL fraction, respetively, implying that most of the minerals reside in the non-structural cell components.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.3
• /
• pp.221-231
• /
• 2005

In this study, occupational exposures to man-made mineral fibers (MMMFs) including glass wool, rock wool, and continuous glass filament fibers were determined and evaluated on the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV). A total of 171 personal samples collected from 4 glass wool fiber, 2 rock wool fibers, 4 continuous filament glass fiber products manufacturing and a glass fiber and rock wool insulations using industries, and determined respirable fibers concentrations using the National Institute for Occupational Safety and Health (NIOSH) Method 7400, "B counting rule. The fiber concentrations of samples from workers installing thermal insulations in a MMMF using industry showed the highest value: geometric mean (GM) = 0.73 f/cc and maximum = 2.9 f/cc, 70% of them were above the TLV, 1 f/cc. Workers' exposure level (GM= 0.032 f/cc) in the rock wool manufacturing industries was significantly higher than those of glass wool (GM=0.012 f/cc) and continuous filament glass fibers (GM=0.010 f/cc) manufacturing industries (p<0.01). No samples were more than the TLV in the MMMF manufacturing industries. There was a significant difference among companies in airborne fiber levels.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.4
• /
• pp.622-629
• /
• 2011

This study was performed to investigate the effect of rice bran dietary fiber powder on serum lipid levels, bowel function, and mineral absorption in rats. Four weeks old male Sprague Dawley rats(SD rat) were divided into four groups : control group fed 5% cellulose as a fiber source, RB10 fed 5% of cellulose and 10% of rice bran dietary fiber powder, RB20 and RB30. The animals were fed the experimental diets for 4 weeks. Serum lipid levels were not significantly different among the groups. But, fecal total cholesterol(TC), triglycerides(TG), and high density lipoprotein cholesterol(HDL-c) excretion increased in the RB30 group. Fecal weight and fecal water content were higher in the rice bran added groups than those in the control group. Transit time was significantly shorter in the rice bran fiber-added groups than that in the control. Weight of the stomach and large intestine in the RB20 and RB30 groups were significantly greater than those in the other groups. Absorption rates of Ca, Mg, P, and Zn decreased significantly in the RB30 group compared to those in the other groups. A high amount of rice bran increased fecal lipids, including TC, TG and HDL-c. Rice bran increased fecal weight and fecal water content and shortened gastrointestinal transit time. However, a high level of rice bran diet decreased mineral absorption rates.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.2
• /
• pp.296-304
• /
• 1998

The effects of common Korean dietary fiber-rich foods(dried sea mustard, Lentinus edodes and Korean radish leaves) on total gut transit time of diet, serum cholesterol level and mineral apparent absorption ration and tissue level were investigated. Twenty eight male were divided into 4 groups and were fed a control diet(containing 2% cellulose) and three fiber supplementary diet mixed with 10% of the above dietary fiber rich foods for 4 weeks, respectively. Body weight gain and food efficiency ration were not affected by the supplementary diet of fiber but the total gut transit time of diet was shortened in all dietary fiber groups. The Lentinus edodes reduced significantly serum total cholesterol and increased the HDL-cholesterol/total cholesterol ratio at 4th week without and effect on calcium and iron apparent absorptions and tissue levels of the minerals. Radish leaves decreased significantly iron apparent absorption ration with a tendency to increase iron retention in spleen and did not alter serum cholesterol level. Serum cholesterol concentration and calcium and iron apparent absorptions were not significantly altered by the ingestion of sea mustard, while it had more soluble dietary fiber than mushroom and radish leaves.