• 전기학회논문지
• /
• 제59권4호
• /
• pp.774-778
• /
• 2010

In this paper, the preliminary EMC analysis process between the Communication, Ocean and Meteorological Satellite (COMS) and the Geostationary Earth Orbit (GEO) launch vehicles in the frequency range is described. The considered launch vehicles are Arian Ⅴ, Sea Launch, Land Launch, Atlas III&Ⅴ, Delta IV, Proton M/breeze M, Soyuz, H II-Aa. The launch vehicle Radiated Susceptibility (RS) specifications have been compared to COMS satellite Radiated Emission (RE) limits. The COMS Radiated Emission (RE) level is determined by calculating the radiated field equal to the quadratic sum of radiated emissions of each equipment switched "ON" during launch. As a result, The RS requirements of Arian V, Atlas III&V and Delta IV lauchers are compliant with COMS RE limits. The negative margins appear between the others launch vehicle RS (Sea Launch, Land Launch, Proton M/Breeze M, Soyuz and H II-A) and COMS RE. Then, if the launchers that have negative margin were chosen by the customer, The EMC tests should be performed at satellite level in order to demonstrate the compatibility with respect to launch vehicles requirements.

• 한국환경과학회지
• /
• 제17권5호
• /
• pp.565-571
• /
• 2008

The surface properties of activated carbon modified by acids and base were studied. The influence of the surface chemistry on the adsorption of benzene and acetone vapor on modified activated carbons has been investigated The modified activated carbons were obtained by treatment with acetic acid ($CH_3COOH$), nitric acid ($HNO_3$) and sodium hydroxide (NaOH). The modified activated carbons had similar porosity but different surface chemistry and adsorption characteristics. The total surface acidity (sum of functional groups) of activated carbon (AC-AN) treated by nitric acid was 2.6 times larger than that of activated carbon (AC) before the acid treatment. Especially, carboxyl group was much developed by nitric acid treatment. The benzene equilibrium adsorption capacity of AC-AN decreased 20% more than that of AC. However, the acetone equilibrium adsorption capacity of AC-AN increased 20% more than that of AC because of the large increase of carboxyl group and acidity.

• Journal of the Korean Data and Information Science Society
• /
• 제9권2호
• /
• pp.345-355
• /
• 1998

다층전방향 신경망을 학습시키기 위해 역전파 알고리즘이 널리 사용되고 있으나 이 알고리즘은 긴 훈련시간, 극소점 문제, 이상치에 민감하다는 단점을 가지고 있다. 한편 실제문제에서는 많은 경우에 자료에 과대오차와 이상치가 포함되게 된다. 따라서 과대 오차에 민감하지 않고, 이상치의 영향을 최소화시키는 로버스트 역전파 알고리즘의 필요성이 대두되었다. 본 논문에서는 기존의 두종류의 로버스트 역전파 알고리즘을 이론적으로 비교하고 비선형 회귀 함수추정과 문자인식과 같은 패턴인식 문제에 적용하여 실험결과를 분석한다. 그리고 향후 연구과제로 신경망 학습을 위해 베이지안 기법의 사용을 제안한다.

• 한국기계가공학회지
• /
• 제15권3호
• /
• pp.21-27
• /
• 2016

The static and dynamic structural integrity qualification was performed through the seismic analysis of a small-size Savonius-type vertical wind turbine at dead weight plus wind load and seismic loads. The ANSYS finite element program was used to develop the FEM model of the wind turbine and to accomplish static, modal, and dynamic frequency response analyses. The stress of the wind turbine structure for each wind load and dead weight was calculated and combined by taking the square root of the sum of the squares (SRSS) to obtain static stresses. Seismic response spectrum analysis was also carried out in the horizontal (X and Y) and vertical (Z) directions to determine the response stress distribution for the required response spectrum (RRS) at safe-shutdown earthquake with a 5% damping (SSE-5%) condition. The stress resulting from the seismic analysis in each of the three directions was combined with the SRSS to yield dynamic stresses. These static and dynamic stresses were summed by using the same SRSS. Finally, this total stress was compared with the allowable stress design, which was calculated based on the requirements of the KBC 2009, KS C IEC 61400-1, and KS C IEC 61400-2 codes.

• 한국기계가공학회지
• /
• 제10권1호
• /
• pp.67-72
• /
• 2011

The main objective of this paper is obtaining the optimal carburizing hours which impacts geometric tolerances, OPD(Over Pin Diameter), runout, hardness and fatigure strength of SCM415 spur gear. In order to observe the deformation of the gear, the circularity, squareness, OPD(Over Pin Diameter) and runout were measured at 3hour, 4hour and 5hour respectively. As the result, the 3hour situation is the best, which very similar with the 4hour one. Afterwards, with the purpose of getting the result of gear hardness, the surface hardness, maximum hardness and interior hardness were measured. The result is 5h situation is the best, and it's similar with 4hour one. At last, the fatigue tests have been done which receive the result that the 4h situation showed 9~12% fatigue strength improvement compared with the 3h and 5h ones. To sum up the results, the 4hour situation shows the best performance in accuracy, hardness and fatigue strength.

• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.124-130
• /
• 2012

An injection mold cooling circuit for an automotive front bumper was optimally designed in order to simultaneously minimize the average of the standard deviations of the temperature and the difference in mean temperatures of the upper and lower molds for uniform cooling. The temperature distribution for a specified design was evaluated by Moldflow Insight 2010, a commercial injection molding analysis tool. For efficient design, PIAnO (Process Integration, Automation and Optimization), a commercial PIDO tool, was used to integrate and automate injection molding analysis procedure. The weighted-sum method was used to handle the multi-objective optimization problem and PQRSM, a function-based sequential approximate optimizer equipped in PIAnO, to handle numerically noisy responses with respect to the variation of design variables. The optimal average of the standard deviations and difference in mean temperatures were found to be reduced by 9.2% and 56.52%, respectively, compared to the initial ones.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권3호
• /
• pp.65-72
• /
• 2013

Adsorption of melamine was examined using columns packed with granular activated carbon (GAC). Raw GAC was sieved with 20, 40, 60 and 80 mesh to determine the influence of adsorbent particle size on reaction and diffusion. The mass ratio of the adsorption capacity of GAC for melamine ranged from 9.19 to 11.06%, and adsorption rates increased with decreasing particle size within this range. Rate constants between 3.295 ~ 4.799 $min^{-1}$ were obtained using a pseudofirst-order equation that was used to determine adsorption kinetics. A surface diffusion model was adapted to take into account the unsteady-state equation of a spherical adsorbent by converting the surface concentration from a constant to a variable governed by a dispersion equation. The calculated values were fit with the experimental results by using the diffusion coefficients as regression parameters. The modified equation exhibited a more precise agreement with respect to the sum of the absolute error (SAE).

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.144-148
• /
• 2006

본 연구의 목적은 기존 수위-유량곡선식 개발과정에 내재되어 있던 목적함수 문제와 곡선식 개발과 정에서 대두된 발산과 처리 불능문제를 해결하기 위해서 새로운 형태의 관계식$(Q=p(h-e)^{\beta}-{\gamma})$과 비선형 매개변수 추정방법을 이을 제안하고 이러한 신개념의 수위-유량곡선식 산정모형을 개발하는데 있다. 기존 수위-유량곡선식은 기존수위-유량자료를 log변환하여 산정된 목적함수는 저수위에 비하여 고수위 부분에 잘못된 유량 값을 추정하는 문제를 갖고 있다. 기존의 발산 문제는 영유량 수위 매개변수 e를 찾고 추정된 식의 목적함수을 수렴하는 동안 매개변수 ${\beta}$가 비정상적으로 커지는 것이다. 이상의 두 가지 문제는 제어변수 ${\gamma}$를 도입하고 목적함수, $min{\sum}w(i)(Q-\hat{Q})^2$를 도입함으로서 개선 할 수 있게 되었다. 본 연구에서는 물리적 분석과 민감도 분석을 통하여 수위-유량곡선식에서 매개변수 ${\gamma}$의 영향이 e의 영향과 같음을 보였다. 또한 개발된 WinCARD 시스템은 기존의 목적함수에 의한 추정오차와 새롭게 제안된 목적함수의 개선사항을 상호 비교할 수 있게 하였다. 본 개발프로그램은 기존 수위-유량곡선식의 적합도를 평가하고, 하천유량 산정을 위한 신개념의 수위-유량곡선식을 개발하는데 활용될 수 있다.

• 산업공학
• /
• 제24권4호
• /
• pp.281-294
• /
• 2011

This paper considers the rail crane scheduling problem which is defined as determining the sequence of loading/unloading container on/from a freight train. The objective is to minimize the weighted sum of the range of order completion time and makespan. The range of order completion time implies the difference between the maximum of completion time and minimum of start time of each customer order consisting of jobs. Makespan refers to the time when all the jobs are completed. In a rail freight terminal, logistics firms as a customer wish to reduce the range of their order completion time. To develop a methodology for the crane scheduling, we formulate the problem as a mixed integer program and develop three metaheuristics, namely, genetic algorithm, simulated annealing, and tabu search. To validate the effectiveness of heuristic algorithms, computational experiments are done based on a set of real life data. Results of the experiments show that heuristic algorithms give good solutions for small-size and large-size problems in terms of solution quality and computation time.

• 생약학회지
• /
• 제48권3호
• /
• pp.255-259
• /
• 2017

This study was conducted to provide basic information on ginseng saponin of dried ginseng radices. In order to achieve the proposed objective ginsenoside compositions of dried ginseng radices extract with 70% ethyl alcohol were examined by HPLC. The total saponin content, the sum of all ginsenosides, showed that Wild simulated ginseng (WSG), White fine ginseng (WFG), Skin White ginseng (SWG), and White ginseng (WG) stood at 2.510%, 1.643%, 0.587, and 0.429%, respectively. WSG in PPD/PPT ratio was highest at 3.190, WFG (1.934), WG (1.600), SWG (1.386) in order. In the content of ginsenoside Rb1, one of the marker compounds of ginseng, WSG (1.095%) showed the highest content, and WFG (0.527%), SWG (0.246%), WG (0.133%) in this order. The content of ginsenoside Rb1 of WSG (1.095%) was 4.5 times higher than SWG (0.246%). WSG (0.230%) showed the highest content in ginsenoside Rg1, a marker compounds of ginseng, followed by WFG (0.180%), SWG (0.141%) and WG (0.086%). The content of ginsenoside Rg1 of WSG (0.230%) was 1.6 times higher than SWG (0.141%).