• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.3
• /
• pp.34-40
• /
• 1993

전기전자산업에 유기분자집합체에 대한 전자 device적 기능을 갖게 하는 초전막형성 기술의 하나로서 LB막이 이용되게 된다. 10여년전에 만들어 대기중에 방치되었던 Langmuir Blodgett(LB) 초전막 시료에 대해서 MIM구조소자에 전하가 발생하는 특성을 검토하였다.그 결과 LB막이 무극성일 때는 상하부전극을 동일 금속으로 하면 전압이 발생하지 않고, 서로 다른 금속전극으로 할 때는 전압이 발생하였는데 양전극금속의 일함수값의 차가 클수록 발생전압이 높았고 LB막이 유극성일때는 동일 전극이라도 전압이 발생하였다.따라서 LB초전막의 MIM 소자에서 발생하는 전하는 단순한 화학작용에 의한 것이 아니고양전극 금속의 일함수와 극성에 관계가 있다고 생각된다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.73-73
• /
• 2009

In this paper, electrical properties in $ZrO_2$-based high-k metal MIM capacitors were studied. Linear voltage coefficient of capacitance (VCC) was 72.375 ppm/V, quadratic VCC was $174.581ppm/V^2$, temperature coefficients of capacitance was $111.01ppm/^{\circ}C$ at 100kHz and $89.497ppm/^{\circ}C$ at 1MHz, which indicate the temperature dependence of electrical parameter for MIM capacitors.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1061-1064
• /
• 2003

In this paper, we deposited A1$_2$O$_3$ thin film using atomic layer deposition(ALD) method on Ti and fabricated metal-insulator-metal(MIM) capacitor. In the result of this study, the typical deposition rate was about 1.12$\AA$/cycle. About 30 nm of Ti was consumed during deposition and TiO$_{x}$ was formed at the interface of A1$_2$O$_3$ and Ti. Its surface roughness was 1.54nm. The leakage current density was 1.5 nA/$\textrm{cm}^2$. The temperature coefficient of capacitance(TCC) of MIM capacitor was 41 ppm/$^{\circ}C$ at 1MHz and 100 ppm/$^{\circ}C$ at 100 kHz.z.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.209-212
• /
• 2001

High quality Taros thin films have been obtained from anodizing. The as-deposited amorphous films have excellent physical and electrical properties: refractive indices ~2.15, dielectric constants ~25, and leakage currents <10$^{-8}$ Ac $m^{-2}$ at 1MV $cm^{-1}$ , 700$\AA$ thickness. We fabricated a MIM element with theses T $a_2$ $O_{5}$ films which had perfect current-voltage symmetry characteristics using a new process technology which was post annealing of whole MIM element instead of conventional annealing conditions (top-electrode metals, annealing conditions) on the capacitor performances were extensively discussed throughout this work.k.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.180-187
• /
• 2016

The independent operation of a color filter for incident polarization is demonstrated using a guided-mode resonance (GMR) filter employing a metal-insulator-metal (MIM) waveguide. To achieve independent operation, a rectangular MIM grating is proposed as a wave-guide resonator. The design considerations are discussed and include how to determine the grating period and slit width. Power flow distribution is observed with slit width variation. Blue-green, green-red, and blue-red filters for corresponding x- and y-polarizations are demonstrated as application examples with numerical simulation with rectangle-shaped MIM grating. As a practical application, feasibility as a chromatic polarizer is discussed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.2
• /
• pp.343-348
• /
• 2007

The physical properties of DMPC monolayer were made for dielectric relaxation phenomena by the detection of the surface pressures and displacements current. Lipid thin films were deposited by accumulation and the current was measured after the electric bias across the manufactured MIM device. It is found that the phospolipid monolayer of dielectric relaxation takes a little time and depend on the molecular area. When electric bias is applied across the manufactured MIM device by the deposition condition of phospolipid mono-layer, it wasn't breakdown when the higher electric field to impress by increase of deposition layers.

• Journal of Powder Materials
• /
• v.14 no.6
• /
• pp.410-414
• /
• 2007

Carbon contamination from the binder resin is an inherent problem with the metal powder injection molding process. Residual carbon in the W-Cu compacts has a strong impact on the thermal and electric properties. In this study, uncertainty was quantified to evaluate determination of carbon in a W-15%Cu MIM body by the combustition method. For a valid generalization about this evaluation, uncertainty scheme applied even to the repeatability as well as the uncertainty sources of each analyse step and quality appraisal sources. As a result, the concentration of carbon in the W-Cu part were measured as 0.062% with expanded uncertainty of 0.003% at 95% level. This evaluation example may be useful to uncertainty evaluation for other MIM products.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.258-260
• /
• 1996

We fabricated MIM device using copolymer LB films of $C_{18}MA-VE_2$. Electric and dielectric properties of MIM device were investigated. In our experimental results, the thickness of maleate copolymer LB film by elipsometry measurements was about $27{\sim}30[\AA]$. Conductivity was found to be $10^{+15}{\sim}10^{-14}[S/cm]$. The maleate copolymer LB film have the property of insulator like organic ultra-thin film. Frequency-dependent dielectric properties was orientational polarization by the dipole.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.503-504
• /
• 2006

The MIM technology is an alternative process for fabricating near net shape components that usually uses gas atomised powders with small size $(<\;20\;{\mu}m)$ and spherical shape. In this work, the possibility of changing partially or totally spherical powder by an irregular and/or coarse one that is cheaper than the former was investigated. In this way, different bronze 90/10 components were fabricated by mixing three different types of powder, gas and water atomised with different particle sizes, in order to evaluate how the particle shape and size affect the MIM process.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.93-94
• /
• 2006

A novel production method for porous metal components has been developed by applying powder space holder (PSH) method to metal powder injection molding (MIM) process. The PSH-MIM method has an industrial competitive advantage that is capable of net-shape manufacturing the micro-sized porous metal products with complicated shapes and controlled porosity and pore size. In this study, the small impeller with homogeneous micro-porous structure was manufactured by the PSH-MIM method. The effects of combinations in size and fraction of PMMA particle on dimensional tolerance and variation of sintered porous specimens were investigated. It was concluded that the PSH-MIM method could manufacture commercially microporous metal components with high dimensional accuracy.