• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.38-44
• /
• 1994

The study was conducted to investigate some grain quality characters related with brewing fittness for rice wine by adopting eight rice varieties as materials. Six japonica rice varieties except two Tongil-type rice had short and round grain of 1.80 or lower grain length/width ratio. 1000-grain weight of brown rice was 21.7~29.5g of significant difference among varieties. The white-center of rice grain was most severe in Hidahomare and Iri 402. Among tested varieties, Seomjinbyeo, Iri 402, Dongjinbyeo and Hidahomare had 50% or higher head rice ratio, while the others had relatively worse milling properties resulted from higher ratio of notched-belly and broken grain. Chemical components and total acid and amino acid content of refined rice wine was relatively good in every variety. Liquifying and saccharificating power was higher and koji conditon was also good in the varieties of high head rice ratio. Seomjinbyeo, Dongjinbyeo and Iri 402 was preferred in sensory test of refined wine and was recognized as superior adaptable rice varieties for brewing rice wine.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.15-26
• /
• 1994

To understand the relative contribution of varietal and environmental variation on various grain quality components in rice, grain appearance, milling recovery, several physicochemical properties of rice grain and texture or palatability of cooked rice for milled rice materials of seven cultivars(five japonica & two Tongil-type), produced at six locations of the middle and southern plain area of Korea in 1989, were evaluated and analyzed the obtained data. Highly significant varietal variations were detected in all grain quality components of the rice materials and marked locational variations with about 14-54% portion of total variation were recognized in grain appearance, milling recovery, alkali digestibility, protein content, K /Mg ratio, gelatinization temperature, breakdown and setback viscosities. Variations of variety x location interaction were especially large in overall palatability score of cooked rice and consistency or set- back viscosities of amylograph. Tongil-type cultivars showed poor marketing quality, lower milling recovery, slightly lower alkali digestibility and amylose content, a little higher protein content and K /Mg ratio, relatively higher peak, breakdown and consistency viscosities, significantly lower setback viscosity, and more undesirable palatability of cooked rice compared with japonica rices. The japonica rice varieties possessing good palatability of cooked rice were slightly low in protein content and a little high in K /Mg ratio and stickiness /hardness ratio of cooked rice. Rice 1000-kernel weight was significantly heavier in rice materials produced in Iri lowland compared with other locations. Milling recovery from rough to brown rice and ripening quality were lowest in Milyang late-planted rice while highest in Iri lowland and Gyehwa reclaimed-land rice. Amylose content of milled rice was about 1% lower in Gyehwa rice compared with other locations. Protein content of polished rice was about 1% lower in rice materials of middle plain area than those of southern plain regions. K/Mg ratio of milled rice was lowest in Iri rice while highest in Milyang rice. Alkali digestibility was highest in Milyang rice while lowest in Honam plain rice, but the temperature of gelatinization initiation of rice flour in amylograph was lowest in Suwon and Iri rices while highest in Milyang rice. Breakdown viscosity was lowest in Milyang rice and next lower in Ichon lowland rice while highest in Gyehwa and Iri rices, and setback viscosity was the contrary tendency. The stickiness/hardness ratio of cooked rice was slightly lower in southern-plain rices than in middle-plain ones, and the palatability of cooked rice was best in Namyang reclaimed-land rice and next better with the order of Suwon$\geq$Iri$\geq$Ichon$\geq$Gyehwa$\geq$Milyang rices. The rice materials can be classified genotypically into two ecotypes of japonica and Tongil-type rice groups, and environmentally into three regions of Milyang, middle and Honam lowland by the distribution on the plane of 1st and 2nd principal components contracted from eleven grain quality properties closely associated with palatability of cooked rice by principal component analysis.

• Korean journal of food and cookery science
• /
• v.8 no.4
• /
• pp.371-378
• /
• 1992

This experiment was carried out in order to investigate effect of rice varieties, milling methods and particle sizes of rice flours on characters of songe cake. The expansion height of batters peaked from in 14 to 18 minutes during baking for 34 minutes at $150^{\circ}C$, and then was gradually decreased. The decrease in the height ranged from 6 to 50% compared to the expansion peak of batters at one day after baking. The inner temperature of the batters showed a tendency to increase slowly and was greatly increased for 8 to 10 minutes. The highest temperature was 94 to $96^{\circ}C$ in 24 to 26 minutes during baking. The volume of the rice cake was not affected by the particle sizes of the rice flours and milling treatment, and ranged from 89 to 95% compared the volume of wheat cake. Therefore, this result indicated the great possibility baking sponge cake used with rice flours. The baked sponge cake by the hydrated flours showed lower stregth than that by the non-hydrated rice flours without correlation with kinds and particle sizes of rice flours, and there were not significant differences in the cohesiveneness of the cakes. The sponge cake of the hydrated rice flour of Taebaek variety was generally superior in texture and taste to the cake of wheat flour as the result of sensory evaluation.

• Journal of Biosystems Engineering
• /
• v.9 no.1
• /
• pp.22-33
• /
• 1984

Husk separator is an indispensable equipment in rice milling plants. However, any basic research on the designing and operating criteria of the husk separator have rarely been conducted in Korea. According to the survey results reported recently, grain loss occurs in the process of rice husk separation at custom rice milling plants in Korea and the performance of husk separator has also not been identified. With this regard this study was conducted with a typical commercial husk separator to investigate the effect of the operational factors such as feed rate, blower speed and opening ratio on the velocity distribution in the air duct and the performance of the separator. The results are summerized as follows: 1. The average wind velocity in the primary air duct increased linearly with the blower rpm and the size of air inlet port in both cases of double type and single type operations. 2. The coefficient of variation in the horizontal wind velocities in the primary air duct was the minimum when the opening ratio was 0.22 ($0.052m^2$ of air inlet port) in both cases of single type and double type operations regardless of the blower speeds used in this test. The average wind velocity at the upper part of air duct was greater by 2-5 m/s than the velocity at the bottom part in double type operation. In case of single type operation, however, the average velocity in the middle part was greater than the upper or bottom part when the opening ratio was greater than 0.74. 3. The relationship between the overall effectiveness of separation(Ed for double type and Es for single type) and the average wind velocity (Va) in the primary air duct was expressed in the following quadratic functions. $$Ed=-190.84+106.18Va-10.052Va^2$$ ($r^2$ = 0.97782) $$Es=-223.76+106.23Va-9.1935Va^2$$ ($r^2$ = 0.97029) The average wind velocity required to obtain the overall effectiveness of separation more than 80% ranged from 4.04 m/sec to 5.84 m/sec in case of double type operation, and from 4.70 m/sec to 6.20 m/sec in case of single type. 4. An optimum wind velocity can be obtained with an increase in the blower speed or the size of air inlet port as presented in Figure 8. There was a tendency that the faster the blower speed, the narrower the control range of the air inlet port. 5. The feed rates (1850kg/hr and 2100kg/hr) adopted in this experiment did not bring about a significant difference in both the overall effectiveness of separation and the power consumption. 6. The energy consumption increased cubically with the blower speed but linearly with the size of the air inlet port. On the basis of the results described in items 1, 3, and 6, it would be more economic to adjust the size of the air inlet port larger with a relatively low blower speed than to adjust the size smaller with a relatively high speed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.22-28
• /
• 2011

Purpose: This article attempted to examine how teeth for restoration is made in a clinical practice and utilize it as future educational material of teeth formation and basic data for additional research. Materials and methods: This experiment investigated the models sent to milling center for production of zirconia crowns. After scanned with Lava CAD/CAM System (3M ESPE, Seefeld, Germany), they are measured on 'ImageJ (version 1.32j, National Institutes of Health, USA)' program and compared and analyzed. Convergence angle from mesio-distal surfaces and bucco-lingual surfaces of each teeth are measured. Also, bucco-lingual diameter of the region lowered as much as 0.4 mm from incisal edge in anterior teeth except canines.(This measure is defined as the Peak 0.4) The analysis of data between each group was conducted by Windows SPSS statistic program, and was proved significant on 95% confidence level by independent t-test, one-way ANOVA and multiple analysis (Sheff${\'{e}}$ test). Results: The mean value of convergence angle was $18.67^{\circ}$ It is ranked as molar ($26.70^{\circ}$) > premolar ($16.87^{\circ}$) > anterior teeth ($14.81^{\circ}$) in the order of mesio-distal convergence angle; anterior teeth ($22.32^{\circ}$) > molar ($20.93^{\circ}$) > premolar ($15.41^{\circ}$) in the order of bucco-lingual convergence angle. The mean value of Peak 0.4 was 1.18 mm. Conclusion: Convergence angle of abutment of zirconia all ceramic crown has difference depending on the location in the arch. Due to the nature of production of zirconia all ceramic crown, convergence angle of abutment and line angle finishing degree can have an effect on internal suitability of restoration.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.3
• /
• pp.357-366
• /
• 1997

Rice quality is considered to have two general meanings; 1) milling, cooking, and processing quality, which refer to suitability of the grain for a particular end-use; and 2) physical quality, which means cleanliness, soundness, and freedom from foreign materials. Grain type is associated with specific milling, cooking, and processing characteristics. Thus, this experiment was conducted to classify the grain type categories and marketing grades for Korean leading rice varieties. Length: width ratio of brown rice kernel ranged from 1.57 to 2.25 and most of varieties belonged to short grain except Tongil type rice varieties. Mean of length: width ratio of brown rice kernel was 1.77 and coefficient of variance was 4.79％ in short grain type varieties. Grain shape could be further classified into 5 types by length:width ratio of brown rice kernel; 1 type(less than 1.75), 2 type(1.76∼1.80), 3 type(1.81∼1.90), 4 type(1.91∼2.00), and 5 type (greater than 2.00). For 1 and 2 type of varieties, woven wire sieve having 1.7mm openings showed better whole-kernel yields for special marketing grade, and sieve having 2.0mm openings for 3 and 4 type of varieties. Grain type which classified into 5 categories was not associated with physicochemical and cooking characteristics of rice grain, but sensory evaluation of cooked rice showed better score for 1 type varieties in terms of appearance, gloss, flavor, texture, stickiness, and taste.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.194-199
• /
• 2002

Eight Korean wheat cultivars were milled and evaluated for the properties of white layer cake-making, compared to a commercial soft wheat flour. Milling yields of the Korean wheat cultivars ranged from 62.5 to 71.8%. The protein and ash contents of flours milled from Korean wheat cultivars ranged from 7.70 to 10.58% and 0.51 to 0.71%, respectively. Woorimil, Alchanmil and Olgeurumil flours, having low protein content, showed very weak mixing characteristics. Even though Eunpamil and Geurumil flours showed longer mixing time and higher peak height, they had week dough stability. Slight differences in pH and specific gravity of cake batter were observed among the Korean wheat flours. Cake volume measured by rapeseed displacement was in the range of $837.5{\sim}952.5\;cc$. Alchanmil flour demonstrated the highest specific volume of 2.40, and the other domestic flours symmetrical and uniform than those with the commercial soft wheat flour. Volume of white layer cakes was negatively affected by flour protein content and somewhat associated with crumb softness. Crumb color of cakes prepared with domestic wheat flours was slightly darker and more yellowish. Hardness of fresh cakes prepared with domestic flours ranged from 307.33 to 416.60 $g_f$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.27-37
• /
• 1994

To catch the relative importance of varietal and environmental variation in various grain quality components associated with palatability of cooked rice, grain appearance, milling recovery, several physicochemical properties of milled rice and texture or eating quality of cooked rice for rice materials of five japonica cultivars, produced at four locations of the mid-mountainous and alpine area of Korea in 1989, were evaluated and analyzed the obtained data. Highly significant varietal and locational variations were detected in 1000-grain weight, amylose content, K/Mg ratio, gelatinization temperature, peak viscosity, breakdown and setback viscosities as compared with variety x location interaction variation. Also, marked locational variations were recongnized in milling recovery from rough to brwon rice, alkali digestibility and protein content, and significant varietal variation was caught in stickiness /hardness ratio of cooked rice. The variety x location interaction variation was especially large in quality components of grain appearance and ripening, palatability of cooked rice and consistency viscosity. One thousand kernel weight was heaviest in Jinbuolbyeo and Odaebyeo, and the unfilled grain ratio was lowest in Jinbuolbyeo. Odaebyeo showed slightly' lower ratio of intact and clear milled rice because of more chalky rice kernels compared with other cultivars. Amylose content of Jinbuolbyeo and Sobaegbyeo was about 1% lower than that of others and K/Mg ratio of Odaebyeo was the lowest one among rice materials. Odaebyeo, Sobaegbyeo and Jinbuolbyeo revealed significantly low gelatinization temperature and setback viscosity while high peak and breakdown viscosities. Cholwon rice showed the greatest kernel weight, good grain filling but lowest ratio of intact and clear milled rice while Jinbu rices exhibited the highest milling recovery from rough to brown rice and ratio of sound milled rice. Amylose content of milled rice in Jinbu rices was about 2-3% lower than those in other locations. Protein content of polished rice was about 1% lower in rice materials of middle zone than those of southern part of Korea. K/Mg ratio of milled rice was highest in Jinbu rice and potassium content was slightly higher in the rice materials of middle region than in those of southern region. Alkali digestion value and gelatinization temperature of polished rice was markedly high in Jinbu rices as compared with other locations. Breakdown viscosity was hightest in Chlown rices and next higher with the order of Hwaso>Unbong>Jinbu rices, and setback viscosity was the quite contrary tendency with breakdown. The stickiness /hardness ratio of cooked rice was relatively higher value in Cholwon rices than in the others and the palatability of cooked rice was a little better in Unbong and Cholwon rices than in Jinbu and Hwaso rices, although variety x location interaction variation was large. The rice materials can be classified largely into two groups of Jinbu and the others by the distribution on the plane of 1st and 2nd principal components (about 60% of total informations) contracted from twelve grain quality properties closely associated with eating quality of cooked rice. Also, Jinbu and the other rices were divided into two and three rice groups respectively. Varietal variation of overall rice quality was smallest in Hwaso. The most superior rice group in overall quality evaluation included Odaebyeo produced at Cholwon, Unbong and Hwaso, and Sobaegbyeo grown at Unbong

• Journal of Animal Science and Technology
• /
• v.57 no.7
• /
• pp.26.1-26.5
• /
• 2015

Background: Rice bran is a by-product of the rice-milling process, which remains largely underutilized; however, efficient processing treatments may improve its feeding value for chickens. This is of great economic and environmental importance, as this can lower the production costs, and offer an opportunity for valorization of a low-quality agricultural by-product, to a high-value feed source. Methods: This experiment was conducted to study the effect of extruded rice bran on performance and phosphorous (P) bioavailability in broiler chickens. In a completely randomized design, 200 seven-day-old broilers (Cobb 500) were allotted to five treatments with five replicates per treatment and 8 chicks per replicate, and fed with their respective diet during the starter (8 to 21 days) and grower (22 to 42 days) periods. Diets were a basal corn-soybean based diet (T1), or diets containing 20 % rice bran (T2), 30 % rice bran (T3), 20 % extruded rice bran (T4), or 30 % extruded rice bran (T5). Results: Birds feeding on T4 and T5 diets had a higher body weight gain and lower feed-to-gain ratio compared to those feeding on T2 and T3 diets (p < 0.05). Birds receiving diets containing extruded rice bran had higher total P availability and tibia ash content, as compared with those receiving diets containing un-extruded rice bran (p < 0.05). Relative weight of the pancreas was higher in birds receiving T2 and T3 diets. Conclusions: The results confirmed the beneficial effect of extrusion treatment of rice bran on performance and P availability in broilers. Up to 30 % extruded rice bran may be included in the broiler diet without apparent adverse effects on the performance.

• Current Research on Agriculture and Life Sciences
• /
• v.10
• /
• pp.117-123
• /
• 1992

Twenty and 24 lines selected from Korean local cultivar, Kalmi and Punggak, respectively, were grown in the University experiment farm to select promising lines for recurrent parent in a backcross breeding program for incorporation of resistance to Phytophthora capsici and Xanthomonas campestris pv vesicatoria into the Korean local cultivars. All the selections of 'Kalmi' and 'Punggak' were relatively late in maturity and the range of the variation was wider in the selections of 'Kalmi' than in those of 'Punggak'. Many of the selections from 'Kalmi' were vigorous, high in sugar content, and tolerant to virus in the field. Many of the selections from 'Punggak' were bearing large fruits with thick pericarp and high milling percentage. Line 6, 9, 14, 18 of 'Kalmi' and line 14, 16, 18 of 'Punggak' were selected as promising lines for recurrent parent in the backcross program.