• 자원리싸이클링
• /
• 제11권2호
• /
• pp.20-27
• /
• 2002

본 연구는 석탄 화력발전소로부터 배출되는 약 20% 정도의 mill reject산물로부터 석탄을 회수하여 에너지원으로 재활용하기 위한 마찰하전형정전선별기술을 개발하는데 있다. 연구결과 회분함량 47%인 mill reject산물로부터 회분함량 15%인 정제 석탄회를 66.23%의 석탄회수율로 얻을 수 있었다. 또한 releases analysis 분석결과 발전소에서 요구하는 회분함량 20% 이내에서 석탄회수율을 80%까지 얻을 수 있는 처리공정을 제시하여, 본 처리법의 우수성을 입증하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.201-202
• /
• 2016

Energetically-modified material using reject fly ash was manufactured to investigate the effect of the material on strength characteristic of cement mortar. In order to modify reject fly ash, a vibration mill was used. after grinding process, the defects in the alignment of atom was checked using transmission electron microscope. It was found that the compressive strength values of 28 days-cured specimens using energetically-modified reject fly ash (ERFA) were higher than that of mortar with non-ground reject fly ash.

• 펄프종이기술
• /
• 제37권1호
• /
• pp.17-24
• /
• 2005

The increase of using low grade ace, the unsorted mixed grade, as fibrous raw materials for the packaging paper results in the increment of fine screen reject owing to the strong tendency to reduce the slot width. Since the most of screen reject consists of undispersed fiber flake, the suitable treatment of the flake could increase the yield of ace recycling and decrease the amount of solid waste. In this work, the novel method combined the mild mechanical treatment by using Tumbling pulper with the biological treatment was developed and applied to the wet strength flake and the fine screen tail line reject originated from a packaging paper mill. The results showed the new method could provide much better efficiency for the disintegration of undispersed flake and for the recovery of fiber from the rejects. The application of the laboratory scaled-Pack pulper showed the possible separation technique for mill application by fractioning effectively the fiber from the treated solid waste.

• 한국세라믹학회지
• /
• 제53권2호
• /
• pp.234-240
• /
• 2016

Energetically-modified material using reject fly ash (RFA), generated from thermal power plants, was manufactured to investigate the effect of the material on the physical and chemical characteristics of cement mortar. In order to modify reject fly ash, a vibration mill was used. Particle size, grain shape, and crystal structure of the ash were analyzed. Then, the compressive strength of the mortar using energetically-modified reject fly ash (ERFA) was measured. Microstructure and X-ray diffraction (XRD) patterns were also used in the analysis. As the replacement rate of ERFA increased, the value of the compressive strength tended to decrease. However, it was found that the compressive strength values of 7 and 28 days-cured specimens were higher than those of conventional ordinary Portland cement (OPC) mortar with 10 % replacement rate condition.

• 펄프종이기술
• /
• 제47권6호
• /
• pp.164-169
• /
• 2015

Nowadays blending ratio of OMG (old magazine) in recovered paper used for manufacturing newspaper have been increased. When large amount of OMG is consumed in newsprint mill, brightness can be improved by inorganic pigments of coating layer. On the other hand decrease in yield of deinking process will be encountered because the pigments can be removed as reject of froth flotation process. Therefore selection of the optimal deinking agent is an important. Non-ionic surfactant have been used widely in newsprint mill. Non-ionic surfactant has amphoteric characteristics. Hydrophilic group is ethylene and propylene oxide that can induce hydrogen bonding with water molecules. In this regard, cloud point is an important parameter in order to control efficiency of deinking process because hydration of the hydrophobic group can be varied according to temperature of a system. In this study, deinking properties of ONP at high blending ratio of OMG was analyzed according to cloud points of non-ionic surfactants. $L^*$, $a^*$, $b^*$, brightness and effective residual ink concentration did not affected by the change of cloud points. Especially, flotation reject decreased significantly according to increase in cloud point of the non-ionic surfactant. Consequently, when a nonionic surfactant having a cloud point higher than the temperature of the system is used, properties of the deinked pulp can be maintained and yield of deinking process can be improved.