본 연구는 가축분 퇴비의 가공에 따른 품질 및 이용성을 향상시키는 기술을 개발하는 목적으로 수행되었다. 펠렛퇴비의 가공효과 개선 및 관련 기술 개발 그리고 퇴비 이용성 개선이 본 과제 수행에 있어 핵심적 해결요소이다. 본 과제 수행에 있어 지금까지 도출된 주요 결과는 다음과 같다. 1 펠렛퇴비 최적가공조건 설정시험 결과, 돈분발효퇴비의 펠렛가공 효과는 재료의 구성과 혼합을 그리고 퇴비원료의 수분함량에 큰 영향을 받는 것으로 나타났다. 2. 스쿠루 형태의 제조방법이나 펄렛밀 형태의 제조방법을 취하는 경우, 두 방법 모두 펠렛화 과정에 따른 퇴비중의 양분손실 현상은 크게 나타나지 않았다. 3. 가공온도가 높고 계분이 함유된 처리구에서 암모니아 발생정도가 가장 높았고 동일한 수준의 돈분뇨 퇴비를 함유한 시험구의 경우, 가공온도와 암모니아 발생량이 정의 상관관계를 보이는 것으로 판단된다. 단 첨가재로 이용된 물질이 가공단계에서 퇴비재료의 pH를 상승시키는 역할을 할 경우 암모니아 발생을 촉진한다. 4. 정상상태의 실온에 보관하였을 경우 펄렛퇴비의 중량은 점차 감소하는 경향을 보인다. 펠렛퇴비 중량의 경우 가공 후 최초 15일 까지는 시간의 흐름에 비례하는 감소하는 경향을 보이고 그 이후부터는 감소율이 낮아지는 결과를 보인다. 펠렛퇴비의 중량감소 정도는 원재료의 구성보다는 경과일수에 영향을 더 받는다. 부피도 시간의 흐름에 따라 감소하는 경향을 보이는데 중량변화보다는 그 변이가 크지 않은 결과를 보였다. 5. 돈분퇴비와 패각을 혼합한 처리구의 내압축력이 상대적으로 낮았던 반면에 돈분과 계분퇴비에 버섯배지와 패각 그리고 미강을 혼합하여 제조한 펠렛퇴비의 내압축적이 가장 우수한 것으로 나타났다.
It is understood that drum speed of threshers and the moisture content of paddy grains to be threshed, respectively, have a signific:mt effect upon rice recoveries. Threshing under an increased drum speed would give a high performance rate, which is the general practice in custom work threshing in association with the use of semiauto-t hreshers. In the connection, however, it may result in the promotion of grain cracks and brokens of the rice product after milling. No reference or determination for an opti mum drum speed of the thresher is made available for various grain moisture contents at the time of the threshing operation and for different rice varieties especially for the Tongil rice varieties. This study was Conducted to find out and determine effects of the drum speeds on grain losses. The grain loss was quantified in terms of recovery rates of rice grains after treatments. Samples of each of all treatments were taken from the grain sampling plate placed in the grain conveyor of threshers. The grain sample plate was specially provided for this experiment. The brown-rice, milling, and head-rice recJveries were tes ted in the laboratory mill, respectively. Two rice varieties, Akibare and Suweon 251, each with five levels of different moist\ulcornerure contents at harvest and six levels of different drum speeds of threshers, were selected and used for treatments in this experiment. Two conditions of materials were tested in the thresher. One condition was to thresh the experimental material immediately after cutting, referred to as the wet-material thr eshing in this study. The other was to thresh the experimental :material, dried to contain about 15-16 percent of the grain moisture under the shocking operation. This is referred to as the dry-material threshing in this study. In additioon, field measurements for the grain moistures and drum-sdeeds under actual operation practices of the traditional field threshing, were conducted with a view to comparing with results of the experimental treatments. The results of the study may be summarized as follows: 1. For threshing treatments of Japonica-type rice variety (Akibare) , the effect of drum speeds and levels of grain moisture at cutting upon brown-rice, milling, and head-rice recoveries were found statistically significant. No significant difference in these recovery rates was noticed regardless of whether the material was threshed right after cutting or after drying by the shocking operation. 2. For the Tongil-sister rice variety(Suweon 251), milling recovery for the varied drum-speed and the grain~moisture level at cutting was found statististically significant. Th milling recovery was much significant when associated with the wet-material thres\ulcornerhing compared to the dry-material threshing. 3. The optimum peripheral velocity to be maintained at the edge of teeth on the thr\ulcorneresher drum was determined and may be recommanded as that of about 12 to 13 meters per second in view of the maximum recovery rate of the milled rice. 4. The effect of the drum speed on the qualitative loss of the milled rice was much greater in the case of the Tongil variety than Japonica. This effect was also greater by the wet-material threshing than by the dry-material threshing. Therefore, to apply the wet-material threshing operation for the Tongil variety, in particular, it should be very important to introduce the kind of threshing technology which would maintain the drum speed at optimum. 5. A field survey for the actual drum speed of threshing operations for 50 threshers indicated that average peripheral velccity was 12.76m/sec., and that the range was from 10.50 to 14.90m/sec. Approximately, more than 30% of the experimented and measured threshers were being operated at speeds which exceeded the optimum speed determined and assessed in this study. Accordingly, it should be highly desirable and important to take counter-measures against these threshing practices of operational overspeed.
It is understood that drum speed of threshers and the moisture content of paddy grains to be threshed, respectively, have a signific:mt effect upon rice recoveries. Threshing under an increased drum speed would give a high performance rate, which is the general practice in custom work threshing in association with the use of semiauto-t hreshers. In the connection, however, it may result in the promotion of grain cracks and brokens of the rice product after milling. No reference or determination for an opti mum drum speed of the thresher is made available for various grain moisture contents at the time of the threshing operation and for different rice varieties especially for the Tongil rice varieties. This study was Conducted to find out and determine effects of the drum speeds on grain losses. The grain loss was quantified in terms of recovery rates of rice grains after treatments. Samples of each of all treatments were taken from the grain sampling plate placed in the grain conveyor of threshers. The grain sample plate was specially provided for this experiment. The brown-rice, milling, and head-rice recJveries were tes ted in the laboratory mill, respectively. Two rice varieties, Akibare and Suweon 251, each with five levels of different moist?ure contents at harvest and six levels of different drum speeds of threshers, were selected and used for treatments in this experiment. Two conditions of materials were tested in the thresher. One condition was to thresh the experimental material immediately after cutting, referred to as the wet-material thr eshing in this study. The other was to thresh the experimental :material, dried to contain about 15-16 percent of the grain moisture under the shocking operation. This is referred to as the dry-material threshing in this study. In additioon, field measurements for the grain moistures and drum-sdeeds under actual operation practices of the traditional field threshing, were conducted with a view to comparing with results of the experimental treatments. The results of the study may be summarized as follows: 1. For threshing treatments of Japonica-type rice variety (Akibare) , the effect of drum speeds and levels of grain moisture at cutting upon brown-rice, milling, and head-rice recoveries were found statistically significant. No significant difference in these recovery rates was noticed regardless of whether the material was threshed right after cutting or after drying by the shocking operation. 2. For the Tongil-sister rice variety(Suweon 251), milling recovery for the varied drum-speed and the grain~moisture level at cutting was found statististically significant. Th milling recovery was much significant when associated with the wet-material thres?hing compared to the dry-material threshing. 3. The optimum peripheral velocity to be maintained at the edge of teeth on the thr?esher drum was determined and may be recommanded as that of about 12 to 13 meters per second in view of the maximum recovery rate of the milled rice. 4. The effect of the drum speed on the qualitative loss of the milled rice was much greater in the case of the Tongil variety than Japonica. This effect was also greater by the wet-material threshing than by the dry-material threshing. Therefore, to apply the wet-material threshing operation for the Tongil variety, in particular, it should be very important to introduce the kind of threshing technology which would maintain the drum speed at optimum. 5. A field survey for the actual drum speed of threshing operations for 50 threshers indicated that average peripheral velccity was 12.76m/sec., and that the range was from 10.50 to 14.90m/sec. Approximately, more than 30% of the experimented and measured threshers were being operated at speeds which exceeded the optimum speed determined and assessed in this study. Accordingly, it should be highly desirable and important to take counter-measures against these threshing practices of operational overspeed.
경기도 양평지역의 유사한 토양 위에 조성되어 있는 41년생 리기다소나무와 낙엽송 조림지를 대상으로 질소 및 인 시비가 표토층(0~20cm)의 질소무기화에 미치는 영향을 조사하였다. 본 연구에서는 비닐주머니 매설법을 이용하여 질소무기화율을 측정하였으며, 시비수준은 대조구 (control), 저수준 시비구 [200 N kg/ha+25 P kg/ha(LNP)], 고수준 시비구 [400 N kg/ha+50 P kg/ha(HNP)] 등 세 처리 수준으로 하였다. 조사기간은 1996년 6윌 5일부터 1997년 6월 4일까지 1년간이었으며, 45일 간격으로 6회 배양을 실시하였다. 본 연구로부터 얻어진 결과들을 종합하면 다음과 같다. 배양초기 토양함수율은 리기다소나무 임분의 경우, 대조구가 32%, LNP 처리구가 28%, 그리고 HNP 처리구가 26%였으며, 낙엽송 임분의 경우 대조구가 31% LNP 처리구가 31% 그리고 HNP 처리구가 33%이었다. 조사기간동안의 평균 질소 무기화율은 두 수종 모두 배양시기간과 처리간에 유의적인 차이가 있는 것으로 나타났으며, 대조구에 비해 시비처리구에서 무기화율이 높았다. 토양시료 배양기간 동안의 연간 질소 무기화량과 질산화량은 수종간 그리고 처리간에 통계적으로 유의적인 차이가 있었다. 연간 질소 무기화량의 경우, 리기다소나무 임분은 대조구가 10.6 kg/ha/year, LNP 처리구가 23.3 kg/ha/year, 그리고 HNP 처리구가 6.6 kg/ha/year였으며, 낙엽송 임분은 대조구가 2.0 kg/ha/year, LNP 처리구가 12.1 kg/ha/year, 그리고 HNP 처리구가 16.7 kg/ha/year 이었다. 연간 질산화량의 경우, 리기다소나무 임분은 대조구가 2.8 kg/ha/year, LNP 처리구가 7.6 kg/ha/year, 그러고 HNP 처리구가 4.3 kg/ha/year 였으며, 낙엽송 임분은 대조구가 4.3 kg/ha/year, LNP 처리구가 14.8 kg/ha/year, 그리고 HNP 처리구가 6.6 kg/ha/year 이었다. 조사기간 동안의 질소무기화량 가운데 질산화량이 차지하는 비율은 리기다소나무의 경우, 대조구가 26%, LNP 처리구가 33%, HNP 처리구가 65%였으며, 낙엽송은 대조구와 LNP 처리구가 >100%, 그리고 HNP 처리구에서 40%를 나타내어 낙엽송 임분에서 질산화가 더 많이 이루어진 것으로 나타났다. 이와 같은 연구결과는 산림생태계 내 유사한 환경하에서의 질소무기화 정도는 우점종이나 시비 등과 같은 산림시업에 의해서도 달라질 수 있다는 것을 암시하는 것이다.
1. Sodium dodecyl sulfate-polyacryl amide gel electro-phoresis (SDS-PAGE)결과에서 찰성밀 계통인 수원 292호, 찰 2, SW97110, SW97134, SW97105, SW97113, SW97106 및 SW97116 등은 모두 60kDa 부근에서의 band가 결여되었다. 2. 본 시험에 사용된 찰성밀은 모본인 보통밀 품종에 비해 종실수량이 $4{\~}20\%$ 낮고, 천립중과 용적중도 낮아 국내 적합형으로의 육종적 개량이 필요한 것으로 나타났다. 3. straight 분의 수율 분포가 보통밀의 경우 66.1(우리밀)${\~}72.5\%$(금강밀), 찰성밀의 경우 61.8(수원 292호)${\~}47.1\%$ (SW97110)범위였고, 각 찰성/메성 그룹내 높은 품종과 낮은 품종간의 제분율 차이는 $6.4\%$와 $5.3\%$를 보였다. 찰성밀 계통과 이들의 모본 품종간의 제분율 차이 역시 $1.5\%$ (SW97110 대 그루밀)에서 $5.8\%$ (SW97134 대 금강밀)까지 큰 변이를 보였는데, 공통적으로 모본보다 찰성밀 계통에서 제분율이 낮았다. 밀가루 회분함량에 있어서도 찰성밀이 보통밀과 같거나 (금강밀 대 SW97134) 보통밀보다 $0.13\%$까지 (우리밀 대 SW97105) 높아서 제분평점에서 찰밀이 보통밀보다 현저히 낮았다. 4. break roll와 reduction roll이 분획별 밀가루 수율에서 찰성밀 계통의 경우 보통밀 품종에 비해 Bl 분이 현저히 낮았으나 R2와 R3 밀가루는 월등히 높았다. Rl 분은 우리밀과 SW97105를 제외한 나머지 찰성 계통들에서 각각의 모본보다 일률적으로 낮았다. 밀가루 수율 감소와 직접적 연관이 있는 bran과 short의 비율에서는 전자의 경우 품종적 영향으로 찰성밀과 보통밀간의 변이가 뚜렷하지 않았으나 후자는 찰성밀이 보통밀 보다 월등히 높았다. 5. Rl 분의 수율이 찰성 계통의 경우 천립중과 용적중이 가장 낮은 수원 292호를 제외한다면 $37.1{\~}38.6\%$로서 비교적 큰 차이가 없는 반면에 보통밀에서는 우리밀, 올그루밀, 그루밀 및 금강밀이 각각 33.9, 36.7, 39.8 및 $40.7\%$로서 다양한 변이를 보임으로서 경${\cdot}$연질, 대${\cdot}$소립의 영향과 높은 상관관계 가능성을 암시해주었다. R1과 R2분에서는 찰성밀이 일률적으로 보통밀보다 높은 수율을 지님으로서 배유조직의 제분특성에서 찰성밀이 보통밀보다 분말화가 용이하지 않음을 나타내 주었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.