• Bulletin of the Society of Naval Architects of Korea
• /
• v.17 no.2
• /
• pp.17-20
• /
• 1980

The shearing forces and bending moments acting on the tanker model[1] of $C_B$ 0.82 in regular oblique waves of shallow water are investigated by numerical calculations. The new strip method was adopted. It is concluded that in the shallow water shearing forces and the bending moments acting on the tanker model are higher than those of deep water waves by the present numerical investigations. The wave bending moment at the midship section is roughly twice of deep water value in the shallow of H/T less than 2. in this calculation.

• Journal of Navigation and Port Research
• /
• v.29 no.2
• /
• pp.119-126
• /
• 2005

Ferry Golden Jindo collided with Ferry Princess near the No.7 light buoy of Incheon Port No.1 Passage in restricted visibility due to dense fog. The result was that Ferry Golden Jindo got a hole at the starboard midship section shell plating and Ferry Princess sustained damages at the starboard bow and 25 persons injured The aim of this paper is to investigate this collision accident, to clarify its causes, and to prevent such accident from occurring again In short, this collision resulted from Princess' high speed in restricted visibility, Golden Jindo's carelessness of watchkeeping, lack of proper safety training of crew, lack of instruction of supervisor, carelessness af PTMS Center and indifference of Korea Shipping Association, etc.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.2
• /
• pp.122-132
• /
• 2003

STEP AP218 has a standard schema to represent the structural model of a midship section. While it helps to exchange ship structural models among heterogeneous automation systems, most shipyards and classification societies still exchange information using 2D paper drawings. We propose a feature parameter input method to generate a 3D STEP model of a ship structure from 2D drawings. We have analyzed the ship structure information contained in 2D drawings and have defined a data model to express the contents of the drawing. We also developed a QUI for the feature parameter input. To translate 2D information extracted from the drawing into a STEP AP2l8 model, we have developed a shape generation library, and generated the 3D ship model through this library. The generated 3D STEP model of a ship structure can be used to exchange information between design departments in a shipyard as well as between classification societies and shipyards.

• Journal of the Korean Institute of Navigation
• /
• v.16 no.1
• /
• pp.14-35
• /
• 1992

The recently-developed automated vessels require a system which evaluates the operating conditions of the ship at present position from weather information as well as sensors ; forecasting the operations condition in the state to come in foreseeable future ; and suggests the optimum course and speed for ship's safety. According to a study, deck wetness, propeller racing, slamming. rolling, vertical acceleration, lateral acceleration, vertical bending moment at midship etc. were chosen as the factors for evaluating seakeeping performance. As a matter of act, there is no developing the hardware of a system which could consider all the factors on seakeeping performance. This study introduces a theoretical method which makes it possible to evaluate the seakeeping performance by applying a theory from reliability engineering, and thereby establishing a safety space. The author adopts rolling and pitching as the factors on seakeeping performance by clarifying the correlation of stochastic processes the factors presently adopted for evaluation system in consideration of the safety of human being, cargoes and the ship. This method of evaluation shall be of much use in developing the practical system of seakeeping performance of a ship in waves.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.6
• /
• pp.503-509
• /
• 2014

This paper describes the time-domain numerical method for prediction of slamming loads on a ship in waves using the strip theory. The slamming loads was calculated considering the relative vertical velocity between the instantaneous ship motion and wave elevation. For applying the slamming force on a ship section, the momentum slamming theory and the empirical formula-based bottom slamming force were used corresponding to the vertical location of wetted body surface. Using the developed method, the vertical bending moments, relative vertical velocities, and impact forces of S175 containership were compared in the time series for various section locations and wave conditions.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.15-21
• /
• 1999

The flow characteristics around KRISO 300K VLCC double-body model have been experimentally investigated in a closed-type subsonic wind tunnel. The local mean velocity and turbulence statistics including turbulent intensity. Reynolds shear stress and turbulent kinetic energy were measured using a x-type hot-wire probe. The measurements were carried out at several transverse stations of the stern and near wake regions. The surface flow was visualized using on oil-film technique to see the flow pattern qualitatively. The flow in the stern and near wake region revealed complicated three-dimensional flow characteristics. The VLCC model shows a hook-shaped wake structure behind the propeller boss in the main longitudinal vortex region. The thin boundary layer at midship was increased gradually in thickness over the stern and evolved into a full three-dimensional turbulent wake.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.1
• /
• pp.80-84
• /
• 2013

This study is to develop the simplified formulae for added mass coefficient of a 2-D floating body with a semi-circle section in a finite water depth. The semi-circle floating body may represent a simplified midship section transformed by Lewis form, which can be used for the ship motion analysis by strip theory. Since the added mass coefficient varies with motion frequencies and sea bottom effect, the correction factor representing the effect of water depth and frequencies is developed for accurate prediction of added mass. Using a two-dimensional numerical wave tank (NWT) technique based on the boundary element method (BEM) including sea bottom boundary the reference values of added mass are calculated to develop the correction factor. For verification and effectiveness of the formulae, the predicted added mass coefficients for various frequencies and water depth ratios are compared with the calculated values from NWT technique.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.4
• /
• pp.300-308
• /
• 2015

With the increases in oil and gas prices, and energy consumption, drillship construction has increased during the last decade. A drillship using a dynamic positioning (DP) system to maintain its position and heading angle during drilling operations. In addition, a drillship is equipped with a moonpool structure to allow its drilling systems to be operated in the midship section. A drillship for the North Sea is specially designed to endure harsh environmental loads. For safe operation in the North Sea, the drillship should have good motion response and robust hull strength. A break water should be considered on the bow and side deck to prevent the green water on deck phenomenon from incoming waves. In addition, the moonpool should be designed to reduce the speed loss and resonance motion. In this study, the hydrodynamic characteristics of a drillship for the North Sea were examined in relation to the motion, wave loads, green water, and moonpool resonance in the initial design stage.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.2
• /
• pp.117-124
• /
• 1983

In rough seas, actual behaviours of a ship may not be estimated by the linear strip theory, because of Nonlinearities due to the hull shape, bottom slamming and bottom and/or bow-flare slamming. In case of slamming, impulsive hydrodynamic pressure occurs on the fore body surface of the ship, resulting hull vibration called whipping, by which the ship may suffer from serious structural damages and the impact pressure, depends critically on the relative velocity at re-entry. In this paper, the Time history of impact froce at each station, the longitudinal distribution of impact force at critical time, the Time history of acceleration at F.P. and the Time history of Bending moment at midship are illustrated. That is, authors analyzed Dynamic response of container ship to be subjected slamming impact force.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.30-36
• /
• 1993

An expert system to help a novice engineer in designing midship section is developed. The system is developed based on a general-purpose expert system shell, NEXPERT. Firstly, the design knowledge is extracted from an existing rule scantling program. The knowledge has been grouped and structured into a hierarchy by applying object-oriented concepts. Secondly, the knowledge base is integrated with a database of existing ships and engineering analysis modules through the Application Programming Interface(API)technique. Graphical User Interface which is developed using Motif wiget set is adopted. These altogether enable construction of an user friendly expert system.