• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권1호
• /
• pp.47-54
• /
• 2003

The radiating multislotted antennas widely used in the antennas technique are rather prospective for the application in industrial installations for microwave heating. In this paper, the model of such an antenna is experimentally investigated. The model under investigation presents a section of the waveguide Inn 340 whose broad wall contains 15 movable slotted plates. This design allows to experimentally define a location of all the slots providing the necessary distribution of radiating power along the waveguide with minimal SWR of all the system. The variants of power uniform distribution along the waveguide as well as the power decreasing to the waveguide end are examined. The application of plates with different thickness allowed to estimate the influence of the walls thickness on the Power distribution. The possibility of system extra-tuning with the help of tuning screws located in the vicinity of each slot is considered. Obtained results are compared to the conducted theoretical calculations and data in references.

• 대한의용생체공학회:의공학회지
• /
• 제18권3호
• /
• pp.261-266
• /
• 1997

Nonevasive multifrequency microwave radiometry using coaxial waveguide antenna has been investigated for a homogeneous and four layer human body model. The coupling between coaxial waveguide antenna and a biological object was analyzed by use of the finite-difference time-domain(FDTD) method to obtain the absorbed power patterns in the media. The object studied in this paper was a homogeneous and four-layered lossy medium. The specific absorption rates(SAR) distribution which was corresponding to the temperature distribution was calculated in each region by use of the steady-state response in FDTD method. The SAR pattern of 1.2GHz was compared with that of 1.8GHz.

• 한국정보통신학회논문지
• /
• 제1권2호
• /
• pp.131-136
• /
• 1997

본 논문에서는 직사각형 도파관내에 놓여 있는 동축선으로 급전되는 사각형 마이크로스트립 패치 안테나의 입력 임피던스를 공진기 모델 및 안테나에 의해 여기되는 도파관내의 전송 모드로부터 이론적으로 계산하였다. 자유공간과 도파관내에서 패치 안테나의 급전 위치에 따른 return loss 및 효율을 계산하여 비교하였으며 최대 효율을 얻을 수 있는 급전점이 자유공간과 도파관에서 차이가 있음을 보였다.

• 한국군사과학기술학회지
• /
• 제25권2호
• /
• pp.135-143
• /
• 2022

In this paper, the compact waveguide slot array antenna for interferometric radar altimeter is proposed. The proposed antenna structure consist of corrugation structure which is applied between each channel to improve isolation, three-channel waveguide slot array antenna and feeder. In addition, to reduce the occurrence of phase ambiguity, the baseline spacing of the three-channel antenna is analyzed and the results are applied to the design. For compact design, reduced height and SMP connector structure are used and the dip brazing method which is the conjugation method after dipping to flux is used for the fabrication of the lightweight antenna. The measurement result of the proposed antenna shows less than 1.41 : 1 (VSWR) and 48.3 dBc (isolation). The antenna gain is higher than 20.2 dBi and the side lobe levels are lower than 18.8 dB (vertical plane) and 10.0 dB (horizontal plane).

• Journal of electromagnetic engineering and science
• /
• 제11권2호
• /
• pp.97-104
• /
• 2011

A planar slotted waveguide array antenna has been designed at 9.37 GHz for X-band radar applications. The antenna consists of multiple branchline waveguides with broadwall radiating shunt slots and a main waveguide to feed the branch waveguides through a series of inclined coupling slots. The antenna feed point is located at the center of the main waveguide. Element weights in the array have been calculated bysampling a continuous circular Taylor aperture distribution at the 25 dB sidelobe level in both the E and Hplanes. A commercially available electromagnetic (EM) simulation tool has been used to characterize the individual isolated slot and that data hassubsequently been used to design the planar array. The array is finally analyzed in a CST Microwave studio and the measured and simulated results have been found to be in good agreement.

• 한국전자파학회논문지
• /
• 제18권1호
• /
• pp.7-14
• /
• 2007

본 논문에서는 직사각형 개방형 도파관들이 삼각 격자 형태로 배열된 구조의 조향 특성을 연구하였다. 무한배열 해석 이론에서의 도파관 모드와 플로케 모드 함수를 이용하여 도파관 내부와 외부의 전계 성분을 적분방정식으로 유도하고 이를 프로그램화하여 조향 소자 패턴과 조향 임피던스를 수치해석하였다. CST사의 MWS(Microwave Studio)와 Ansoft사의 HFSS(High Frequency Structure Simulator)를 이용하여 얻어진 시뮬레이션 결과와 계산된 결과를 비교하였고, 아울러 $8{\times}8$ 부배열을 제작하고 측정하여 시뮬레이션과 계산 결과와 비교함으로써 접근 방법의 타당성을 검증하였다. 제작된 부배열 안테나는 X-대역에 있는 중심주파수의 10.5 % 대역 내에서 E-면(방위각)과 H-면(고각) 조향 범위 ${\pm}45^{\circ}C,\;{\pm}20^{\circ}C$ 내에서 평탄한 이득을 갖고 또한 -10 dB 이하의 반사 손실을 갖는 것을 확인하였다.

• 전기학회논문지
• /
• 제64권3호
• /
• pp.422-428
• /
• 2015

A 2.45GHz microwave plasma source with a linear antenna has been developed for low temperature large scale deposition processing. Microwave power is transmitted through WR340 waveguide and a copper rod, linear antenna, is located in a quartz tube. The power matching is effectively achieved by a linear antenna is located at ${\lambda}_g/4$ or $3{\lambda}_g/4$ from the end of WR340 waveguide. The Ar plasma was generated along the surface of quartz tube and a clear standing wave pattern with nearly 10cm wavelength was observed at Ar pressure of 200mTorr and 200W input power. The electron density and electron temperature were investigated by using the electrostatic probe. The electron density and electron temperature were highly measured near the surface of quartz tube. Ar plasma density along the quartz tube is mostly uniform despite standing wave set-up and antenna of long length. A uniform temperature was measured at 10~40cm distance from the end quartz tube and 5cm distance from the surface of quartz tube.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.272-275
• /
• 1997

Noninvasive multifrequency microwave radiometry using coaxial waveguide antenna has been investigated for a homogeneous and our layer human body model. We derived finite-difference time-domain(FDTD) algorithm and equation of MUR and generalized perfectly matched layer(GPML) absorbing boundary conditions(ABCs) in cylindrical coordination. The coupling between coaxial waveguide antenna and a biological object was analyzed by use of the FDTD method using MUR and GPML ABCs to obtain the absorbed power patterns in the media. The specific absorption rates(SAR) distribution which was corresponding to the temperature distribution was calculated in each region by use of the steady-state response in FDTD method. The SAR patterns of FDTD method using MUR ABCs was compared with those of FDTD method using GPML ABCs.

• Journal of Information Processing Systems
• /
• 제15권1호
• /
• pp.189-202
• /
• 2019

During thermal power coal-fired boiler operation, it is very important to detect the pulverized coal concentration in the air pipeline for the boiler combustion stability and economic security. Because the current measurement methods used by power plants are often involved with large measurement errors and unable to monitor the pulverized coal concentration in real-time, a new method is needed. In this paper, a new method based on microwave circular waveguide is presented. High Frequency Electromagnetic Simulation (HFSS) software was used to construct a simulation model for measuring pulverized coal concentration in power plant pipeline. Theoretical analysis and simulation experiments were done to find the effective microwave emission frequency, installation angle, the type of antenna probe, antenna installation distance and other important parameters. Finally, field experiment in Jilin Thermal Power Plant proved that with selected parameters, the measuring device accurately reflected the changes in the concentration of pulverized coal.

• 한국위성정보통신학회논문지
• /
• 제2권2호
• /
• pp.10-15
• /
• 2007

위성방송수신 및 위성 양방향 인터넷, VSAT 등의 위성통신서비스를 차량 이동 시에도 이용할 수 있기 위해서는 차량에 탑재하기 용이하도록 소형이며 높이가 낮은 안테나 구조가 요구된다. 또한 중위도 지역에서 평면 안테나 상태로 45도 빔틸트 특성을 갖고, Ku 밴드의 위성통신용으로 충분한 고이득을 얻기 위해, 빔폭이 좁고 사이드로브가 적으며 저손실 구조의 배열안테나 개발이 필요하다. 본 논문에서는 이러한 성능을 만족시키기 위해, 진행파형 누설파 모드를 기초로 한 수직 편파로 동작하는 도파관 종방향 슬롯 배열안테나를 제안하였다. 16개 누설파 소자의 배열안테나 이득은 30 dBi 이었으며, 빔폭은 4.9도, 사이드로브 레벨은 -20 dB 이하, 중심주파수에서 빔틸트 각도는 45도를 얻었다. 급전선로는 도파관의 병렬급전 방식으로 설계하여 광대역, 저손실 특성을 얻을 수 있었다.