• 한국전기전자재료학회논문지
• /
• 제35권3호
• /
• pp.275-280
• /
• 2022

An all-solid-state electrochromic film was fabricated by laminating tungsten oxide (WO₃) and nickel oxide (NiO) thin films deposited by a reactive DC magnetron sputtering on flexible ITO films. The influence of oxygen partial pressure on the crystal structure, microstructure, optical properties, and electrochromic properties of WO₃ and NiO thin films were investigated. WO₃ and NiO films showed the best electrochromic properties under the flow of Ar:O₂=80:20 and Ar:O₂=90:10, respectively. The EC film fabricated with an optimized WO₃ and NiO films showed a high coloration efficiency, a fast response time, and a stable optical modulation. It is expected that flexible EC window films will pave the way for the next-generation energy-saving windows.

• 한국가스학회지
• /
• 제26권3호
• /
• pp.21-26
• /
• 2022

아연은 인체에 유해한 카드뮴을 대체하여 금속재료에 수소가스가 침투하거나 금속재료 내부로부터 수소가 누출되는 것을 방지하기 위한 친환경 코팅 재료로 주목받고 있다. 일반적으로 수성 및 산성 분위기에서 수행되는 아연(Zn) 및 아연 합금의 전기도금은 낮은 쿨롱 효율, 부식 및 수소 누출과 같은 단점이 있어 산업적 이용이 어렵다. 본 연구에서는 염화콜린과 에틸렌글리콜을 이용하여 Deep-eutectic solvent를 합성하고 이를 용매로 사용하여 아연 도금용 전해질을 제조하여 STS 304 기판 위에 전기 도금하였다. 주사전자현미경(SEM)과 원자힘현미경(AFM)을 이용하여 표면 미세구조와 조도를 관찰하였다. X선회절분석(XRD)을 이용하여 도금 막의 결정구조를 분석하였다. 마지막으로 수소를 주입한 STS 304 기판에 최적화된 Zn 도금액을 코팅한 시료의 수소 방출 방지 효과를 분석하였다.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.1972-1981
• /
• 2022

A typical ferritic/martensitic (F/M) steel sheet was subjected to pulsed laser surface remelting (LSR) and corrosion test in lead-bismuth eutectic (LBE) at 550 ℃. There present two modification zones with distinct microstructures in the LSRed specimen: (1) remelted zone (RZ) consisting of both bulk δ-ferrite grains and martensitic plates and (2) heat-affected zone (HAZ) below the RZ, mainly composed of martensitic plates and high-density precipitates. Martensitic transformation occurs in both the RZ and the HAZ with the Kurdjumov-Sachs and Nishiyama-Wassermann orientation relationships followed concurrently, resulting in scattered orientations and specific misorientation characteristics. Hardnesses of the RZ and the HAZ are 364 ± 7 HV and 451 ± 15 HV, respectively, considerably higher than that of the matrix (267 ± 3 HV). In oxygen-saturated and oxygen-depleted LBE, thicknesses of oxide layers developed on both the as-received and the LSRed specimens increase with prolonging corrosion time (oxide layers always thinner under the oxygen-depleted condition). The corrosion resistance of the LSRed F/M steel in oxygen-saturated LBE is improved, which can be attributed to the grain-refinement accelerated formation of dense Fe-Cr spinel. In oxygen-depleted LBE, the growth of oxide layers is very low with both types of specimens showing similar corrosion resistance.

• Composites Research
• /
• 제35권3호
• /
• pp.188-195
• /
• 2022

본 논문은 멀티스케일 공정-구조 해석의 방법론을 제안하고 단섬유층과 직물층으로 이루어진 배터리 하우징 파트에 적용한다. 특별히 마이크로스케일 대표체적요소(RVE: Representative Volume Element)안 기지의 불확정성을 고려하였다. 마이크로스케일의 RVE내 기지 물성의 랜덤한 공간내 분포는 KLE(Karhunen-Loeve Expansion)을 통해 구현하였다. 공간상 랜덤분포된 기지 물성을 갖는 RVE의 유효 물성을 전산균질화를 통해 얻어 매크로스케일 유한요소 모델에 매핑하였다. 또한 하이브리드 공정해석을 통해 압축 성형 해석으로부터 얻은 잔류응력과 섬유배향을 매핑한 유한요소 모델과 드레이핑 공정 해석결과로부터 얻어진 섬유배향을 매핑한 모델을 결합하였다. 본 연구에 제안된 방법은 배터리 하우징 뿐만 아니라 다양한 재료 구성을 갖는 복합재료의 공정-구조해석을 통해 설계요구도를 엄밀하게 평가할 수 있을 것이라 기대된다.

• 한국전기전자재료학회논문지
• /
• 제35권5호
• /
• pp.516-521
• /
• 2022

We investigated the microstructure, crystal structure, dielectric, and elecromechanical strain properties of lead-free BaTiO₃ (BT)-modified (Bi_1/2Na_1/2)TiO₃-SrTiO₃ (BNT-ST) piezoelectric ceramics. Samples were prepared by a conventional ceramic processing route. Temperature dependent dielectric properties confirmed that a phase transition from a nonergodic relaxor to an ergodic relaxor was induced when the BT concentration reached 1.5 mol%, interestingly, where the average grain size reached a maximum value of 4.5 ㎛. At the same time, enhanced electromechanical strain (S_max/E_max = 600 pm/V) was obtained. It is suggested that the induced ferroelectric-relaxor phase transition by the BT modification is responsible for the enhancement of electromechanical strain in 1.5 mol% BT-modified BNT-ST ceramics.

• Corrosion Science and Technology
• /
• 제21권2호
• /
• pp.130-137
• /
• 2022

In this work, the degradation of high-pressure superheater tubes exposed to the flame of a duct burner in a heat recovery steam generator of a district heating system was evaluated. To assess the deterioration of the used superheater tube, the microstructure, microhardness, and tensile properties were investigated by comparison to an unused tube. The study found that a fin bound at the outer surface of the used tube became fragile only in the location facing the flame. This indicates that the tube was directly exposed to the flame from the duct burner or underwent abnormal overheating. While the unused tube showed a uniform value in hardness and equiaxial grain structure, the used tube revealed a decrease in hardness up to 105 HV and an increase in grain size with a plate-like morphology in the location facing the flame. The coarsening of the grain structure by the flame weakened the mechanical properties of yield strength, tensile strength, and elongation.

• Journal of the Korean Wood Science and Technology
• /
• 제31권4호
• /
• pp.44-49
• /
• 2003

수용성 방부처리(AAC, CCA-3, ACQ, CuAz) 소나무 시편의 기상열화에 대한 저항성을 평가하기 위하여 인공촉진열화 방법을 사용하였다. 기상열화에 의한 재색 및 중량변화, 물리적 표면열화, 목재조직의 변화를 종합적으로 고려할 때, AAC 처리시편을 제외한 ACQ, CCA, CuAz 처리시편은 기상열화에 대한 저항성이 있음을 알 수 있었다. 이러한 몇몇 방부처리재가 기상열화에 대하여 저항성을 나타내는 요인탐색을 위해 기상열화 산물을 분석하였는데, 그 결과, ACQ, CCA, CuAz 처리시편에서는 낮은 리그닌 함량이 측정되어 기상열화 저항성을 가지는 처리시편은 리그닌 열화가 적게 일어남을 나타냈다. 이는 방부제 유효성분이 목재 주성분 중 기상열화에 민감한 리그닌 구조에 정착함으로써 리그닌 열화에 대한 저항성이 발현되었기 때문으로 판단된다.

• 한국주조공학회지
• /
• 제42권2호
• /
• pp.77-82
• /
• 2022

일방향응고 초내열합금 CM247LC의 응고조건에 따른 조직과 기계적 특성을 고찰하기 위해 초기 응고조건을 인위적으로 변화시켜 일방향응고를 진행하였다. 초기 응고 조건은 알루미나 판의 삽입, 접종재의 삽입, Ni foil의 삽입과 냉각판에 직접 주입 등으로 조절하였으며, 이에 따라 초기 결정립의 수의 많은 차이를 보였으며 응고방향과 평행으로 성장하는 결정립의 형태 및 γ' 석출상의 크기 등에서도 많은 차이를 보였다. 냉각속도가 빠른 용탕의 냉각판에 직접 주입한 경우 많은 결정립, 미세한 γ'상 및 γ-γ'공정상 등이 나타났다. 빠른 냉각은 고체/액체 사이의 온도구배를 증가시켜 일방향응고 후 1차 수지상 간격을 미세하게 함으로써 우수한 인장특성을 갖게 하였다.

• 열처리공학회지
• /
• 제34권6호
• /
• pp.272-280
• /
• 2021

The influence of acetylene flow rates on the carburizing behavior of an AISI 4115 steel in 1 ton-class mass production-type vacuum carburizing furnace has been studied through microstructure, carbon concentration, hardness analyses. The AISI 4115 steels were carburized with various flow rates (20, 32.7, 60 l/min) and locations in the furnace (top, center, bottom) at 950℃. The acetylene flow rate played an important role in controlling the carburizing properties of carburized samples, such as effective case depth and uniformity carburizing according to location in the furnace. At an acetylene flow rate of 20 l/min, the carburized samples had a shallow average hardened layer (0.645 mm) compared to the target hardening depth (1 mm) due to low carbon flux and spatial uniformity of carburization (17.8%) in the furnace. At a flow rate of 60 l/min, the carburized samples showed an average hardened layer (1.449 mm) deeper than the target hardening depth and had the spatial uniformity of carburization (98.8%). In particular, at a flow rate of 32.7 l/min, the carburized samples had an average hardened layer (1.13 mm) close to the target hardening depth and had the highest carburizing uniformity (99.1%). As a result, an appropriate flow rate of 32.7 l/min was derived to satisfy the target hardening depth and to have spatial uniform hardened layer in the furnace.

• 한국전기전자재료학회논문지
• /
• 제35권5호
• /
• pp.445-451
• /
• 2022

Ultrasonic sensor is suitable as a next-generation autonomous driving assist device because its lower price compared to that of other sensors and its sensing stability in the external environment. Although Pb(Zr, Ti)O₃ (PZT)-relaxor ferroelectric system has excellent piezoelectric properties, the change in capacitance is large in the daily operating temperature range due to the low phase transition temperature. Recently, many studies have been conducted to improve the temperature stability of ferroelectric ceramics by controlling the grain size and crystal structure, so it is necessary to study the effect of the grain size on the piezoelectric properties and the temperature stability of PZT-relaxor ferroelectric system. In this study, the piezoelectric properties, phase transition temperature, and temperature coefficient of capacitance (TCC) of 0.9 Pb(Zr_1-xTi_x)O₃-0.1 Pb(Zn_1/3Nb_2/3)O₃ (PZT_x-PZN) ceramics with various grain sizes were investigated. PZT_x-PZN ceramics with larger grain size showed higher piezoelectric properties and temperature stability, and are expected to be suitable for ultrasonic devices in the future.