• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.109-120
• /
• 2010

This study aims to develop mathematical models for estimating saturation flow rates at the stop line of signalized intersection due to Workzones in the vicinity, since the saturation flow rate is the most critical parameter in capacity analysis for signalized intersections. It was found by reference review that saturation flow rates are sensitively influenced by the location of Workzone, the number of lanes, cycle length and effective green time. Extensive microscopic simulation runs were also performed and compared to the those of mathematical models for model verification. Mathematical models were developed based on traffic flow theory and dualizing them by the location of workzones. And then each result produced by changing important parameter values was carefully examined and analyzed. Small but consistent differences in saturation flow rate values between mathematical models and simulations exist. However, the pattern of changes in saturation flow rates depending on each variable was similar.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.4005-4011
• /
• 2010

This study investigates the effect on automobile traffic flow of the bike lane configuration via the road diet implemented in Nam-Gu, Busan using the microscopic simulator TransModeler. The results show that the increases in average delay time and stopped time experienced by automobile vehicles after implementing the road diet during the peak period are significant, but those during the non-peak period are insignificant at alpha=0.1. The results in peak period are consistent with the results of the past studies, which concluded that a road diet can contribute to deteriorating the level of service when the automobile traffic flow rate on the existing roadway is relatively high. For the non-peak period, the analysis results may reflect the fact that the automobile traffic flow is not severly affected by the road diet due to the reserved capacity.

• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.109-119
• /
• 2014

PURPOSES : The control delay in seconds per vehicle is the most important traffic operational index to evaluate the level of service of signalized intersections. Thus, it is very critical to calculate accurate control delay because it is used as a basic quantitative evidence for decision makings regarding to investments on traffic facilities. The control delay consists of time-in-queue delay, acceleration delay, and deceleration delay so that it is technically difficult to directly measure it from fields. Thus, diverse analysis tools, including CORSIM, SYNCHRO, T7F, VISTRO, etc. have been utilized so far. However, each analysis tool may use a unique methodology in calculating control delays. Therefore, the estimated values of control delays may be different by the selection of an analysis tool, which has provided difficulties to traffic engineers in making solid judgments. METHODS : This study was initiated to verify the feasibility of diverse analysis tools, including HCM methodology, CORSIM, SYNCHRO, T7F, VISTRO, in calculating control delays by comparing estimated control delays with that measured from a field. RESULTS : As a result, the selected tools produced quite different values of control delay. In addition, the control delay value estimated using a calibrated CORSIM model was closest to that measured from the field. CONCLUSIONS : First, through the in-depth experiment, it was explicitly verified that the estimated values of control delay may depend on the selection of an analysis tool. Second, among the diverse tools, the value of control delay estimated using the calibrated microscopic traffic simulation model was most close to that measured from the field. Conclusively, analysts should take into account the variability of control delay values according to the selection of a tool in the case of signalized intersection analysis.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.5
• /
• pp.29-41
• /
• 2016

V2X environment is the most popular part of the C-ITS based on the high technologies. To evaluate V2X environment technologies, radio communication range and market penetration rate of V2X vehicle are used. This paper studies the V2X environment considering various traffic congestion level, radio communication range and market penetration rate of V2X vehicle using the microscopic simulation (VISSIM) based on proper parameters and algorithm. In conclusion, V2X environment can reduce the congestion in proper traffic volume. However, if traffic volume is almost near the capacity, even V2X environment can't relieve the road condition. Furthermore, increase of the radio communication range does not always mean the decrease of the congestion and even with the small market penetration rate, it can also have an impact on the V2X environment. This result will be the foundation for the V2X environment much better.

• Journal of Korean Society of Transportation
• /
• v.18 no.6
• /
• pp.47-61
• /
• 2000

차량추종모형은 차선변경모형과 함께 미시적 시뮬레이션 모형의 핵심 모형으로서 정확한 차량추종모형의 적용은 시뮬레이션 모형 분석결과의 신뢰성에 영향을 미친다. 기존의 차량추종모형은 대부분 가속상황과 감속상황에 동일한 모형을 적용하거나 자극부문과 민감도 부분은 거의 동일한 형태를 취하고 있으며, 가상자료를 토대로 모형이 개발되었다. 본 연구의 목적은 첫째, 모형을 추정하기 위한 연구체계를 구성하고, 둘째, 이러한 연구체계를 이용하여 신호교차로 미시적 시뮬레이션에 직접 적용이 가능한 차량추종모형을 정립하는 데 있다. 본연구에서는 이를 위해서 신호교차로에서 미시적 실측자료를 수집하였으며, 수집된 자료에서 통계적 기법을 통해서 모형 추정에 적합한 자료를 구축하였다. 현장에서 실측된 이산적인 원시자료는 차량추종모형 추정에 직접 이용할 수 없다. 따라서, 이산적 원시자료를 모형추정에 적합한 자료로 구성하기 위하여 비선형 곡선적합 알고리즘을 이용하여 연속적인 궤적함수를 구성하였고, 이를 통해서 모형추정에 필요한 선두차량과 후행차량의 현재시점과 반응시간 이후 시점에서의 위치, 순간 가속도와 순간속도 등을 도출하였다. 본 연구에서는 차량추종상황을 가속상황, 감속상황, 출발상황, 그리고 정지상황으로 구분하여 차량추종모형을 구축하였다. 가속상황과 감속상황에 대해서는 실측자료를 이용하여 모형을 추정하였으며, 출발상황과 정지상황에 대해서는 추정된 가/감속상황의 모형을 바탕으로 출발상황과 정지상황에서의 차량행태를 설명할 수 있는 모형을 구축하였다 또한, 민감도와 자극부분을 새롭게 정의하여 각 상황별로 미시적 실측자료를 이용하여 모형을 추정하였다. 이렇게 추정된 모형들 중에서 통계적 기법과 실측치와의 비교를 통해서 가장 적합한 모형을 선택하였다. 선택된 모형은 통계적 검정, 가상자료 그리고 실측치와의 비교를 통해서 분석하였으며, 분석결과 구축모형의 적용성은 우수한 것으로 분석되었다.

• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.61-67
• /
• 2004

It is needed for one to design the better models estimating emission and then with the real time data, make the monitoring system simulating emission rate because of having built the basement of accepting real-time traffic information in ITS projects. The objective of the study is to develop the monitoring system visualizing air pollution to a certain place. It is based on the estimated emission from the patterns of individual vehicles and the changes of traffic flow. For constructing simulator, we loaded referring algorithm in actuality program and simulates the traffic flow movement in a microscopic viewpoint. The simulator is able to express not only the movement of each car but also to visualize processing the emission and diffusion of the air pollutant by computer program. Not only expresses the simulation process the angle of vision but it also cutting down environment expenses and improving the traffic impact assessment and the traffic impact assessment.

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.5
• /
• pp.1-7
• /
• 2017

We propose a complex crack generation technique which is represented when impact is applied to glass. The crack patterns expressed when external forces are applied to the glass are classified into dense, radial, and concentric cracks, and we use procedural methods to efficiently represent crack patterns. Based on the input external force, we synthesize the crack example and apply the L-system based on this example to model the propagation shape of the crack in real time. Although physics based crack generation can analyze and model accurate cracks, it has a disadvantage of slow computation because of its high computational cost, and procedural methods have a relatively fast rate of continuity, but are not sufficient to capture accurate crack characteristics. We modeled cracks in glass using L-system to achieve both of these advantages. As a result, it realistically represented the microscopic crack patterns of glass in real time.

• Journal of Information Processing Systems
• /
• v.5 no.1
• /
• pp.33-40
• /
• 2009

Ever since the network-based malicious code commonly known as a 'worm' surfaced in the early part of the 1980's, its prevalence has grown more and more. The RCS (Random Constant Spreading) worm has become a dominant, malicious virus in recent computer networking circles. The worm retards the availability of an overall network by exhausting resources such as CPU capacity, network peripherals and transfer bandwidth, causing damage to an uninfected system as well as an infected system. The generation and spreading cycle of these worms progress rapidly. The existing studies to counter malicious code have studied the Microscopic Model for detecting worm generation based on some specific pattern or sign of attack, thus preventing its spread by countering the worm directly on detection. However, due to zero-day threat actualization, rapid spreading of the RCS worm and reduction of survival time, securing a security model to ensure the survivability of the network became an urgent problem that the existing solution-oriented security measures did not address. This paper analyzes the recently studied efficient dynamic network. Essentially, this paper suggests a model that dynamically controls the RCS worm using the characteristics of Power-Law and depth distribution of the delivery node, which is commonly seen in preferential growth networks. Moreover, we suggest a model that dynamically controls the spread of the worm using information about the depth distribution of delivery. We also verified via simulation that the load for each node was minimized at an optimal depth to effectively restrain the spread of the worm.

• Journal of Korean Society of Transportation
• /
• v.29 no.5
• /
• pp.107-120
• /
• 2011

Traffic signal is one of the major factors that affect the amount of vehicle emissions on urban highway. The amount of vehicle emissions in urban area is highly affected by the vehicle's cruising speeds heavily influenced by the traffic signal lighting conditions. It was attempted in this study to trace the changing patterns of the vehicle emissions by collecting the emission data from a set of simulation studies and by categorizing vehicle cruising conditions into four different groups: idling, acceleration, deceleration, and running at a constant speed. Authors propose a simple emission model prepared based on Kinematic theory. The validation test results showed that the amount of the emission estimated by the proposed model was relatively satisfactory compared to the one of the existing model employing the average speed data only as the determinant.

• Journal of The Korean Association For Science Education
• /
• v.14 no.1
• /
• pp.85-102
• /
• 1994

The purpose of this study was to analyze students' physics problem solving processes and to find the patterns of their problem spaces when high school and university students solved the physics problems. A total of 51 students in a high school and in two universities participated in this study. Their thinking processes in solving 5 physics problems on electric circuit were recorded by using 'thinking aloud' method and were transferal into protocols. 'The protocols were analyzed by the coding system of problem solving process. One of the major theoretical contributions of the computer simulation approach to problem solving is the idea of problem space. Such a concept of problem space was applied to physics problems on electric circuit in this study, and students' protocols were analyzed by the basic problem spaces which were made up from the item analysis by the researcher. The results are as follows: 1) On the average 4.0 test items among 5 ones were solved successfully by all subjects, and all of the items were solved correctly by only 19 persons among all of them. 2) In regard to the general steps of problem solving process, there was little difference for each item between the good solvers and the poor ones. But according to the degree of difficulty of task there was a good deal of difference. For a complex problem all of 4 steps were used by most of students, but for a simple one only 3 steps except evaluating step were used by most of them. 3) It was found in this study that most of students used mainly the microscopic approach, that is, a method of applying Ohm's law on electric circuit simply and immediately, not using the properties of electric circuits. And also it was observed that most of students used the soloing tom below, that is, a solving path in which they were the first to calculate physical Quantities of circuit elements, before they caught hold of the meaning of the given problem regardless of the degree of difficulty.