• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.597-604
• /
• 2003

In the soil washing process, the contaminants are usually removed by abrasion from soil particles using mechanical energy and water However, organic contaminants with low water solubility like polycyclic aromatic hydrocarbons (PAH) are remained on soil particles. Previous studies have shown that surfactant possessing amphipathic activity enhances the solubility of organic materials. For this reason solutions with surfactants have been used to improve removal of organic contaminants on soil washing process. But, in this manner, many problems were found like complete loss of surfactants and additional contamination by surfactant. The remediation method using microemulsion has been introduced to overcome these disadvantages. In this case, surfactants are recycled by phase separation of microemulsion after remediation. In microemulsion process, the surfactant will be recycled by phase separation of the microemulsion into a surfactant-rich aqueous phase and an oil phase after extraction. That is why remediation concept applying microemulsion as washing media has been Introduced. Suitable microemulsion have to be used in order to have the chance of refilling the soil after decontamination and to avoid any risk due to toxicity. The purpose of this research is to evaluate effect of microemulsion to remediation of contaminated soil. We performed test with various organic contaminants like Pyrene and BTEX, also compared efficiency of remediation in microemulsion process with soil washing

• KSBB Journal
• /
• v.7 no.3
• /
• pp.161-165
• /
• 1992

Water-insoluble sitosterol was biotransformed to AD(4-androstene-3, 17-dione) and ADD(1, 4-androstadiene-3, 17-dione) with crosslinked Mycobacteria sp. NRRL B-3683 in microemulsions. The Mycobacteria activity depended on the kinds of surfactants and water content. The activity was very high in cationic microemulsion (CTAB-buthanol-cyclohexane-water) and five times higher than that of buffer, but it showed a very low activity in anionic microemulsion. The Mycobacteria activity was increased as increasing as increasing water contents and in the microemulsion containing 20% water was doubled in the same microumulsion containing 5% water. We suggest that microemulsion is effective reaction medium for Mycobacteria bioconversion.

• Archives of Pharmacal Research
• /
• v.25 no.4
• /
• pp.534-540
• /
• 2002

To develop novel transdermal formulation for aceclofenac, microemulsion was prepared for increasing its skin permeability. Based on solubiity and phase studies, oil and surfactant was selected and composition was determined. Microemulsion was spontaneously prepared by mixing ingredients and the physicochemical properties such was investigated. The mean diameters of microemulsion were approximately 90 nm and the system was physically stable at room temperature at least for 3 months. In addition, the in vitro and in vivo performance of microemulsion formulation was evaluated. Aceclofenac was released from microemulsion in acidic aqueous medium, and dissolved amounts of aceclofenac was approximately 30% after 240 min. Skin permeation of aceclofenac from microemulsion formulation was higher than that of cream. Following transdermal application of aceclofenac preparation to delayed onset muscle soreness, serum creatine phosphokinase and lactate dehydrogenase activity was significantly reduced by aceclofenac. Aceclofenac in microemulsion was more potent than cream in the alleviation of muscle pain. Therefore, the microemulsion formulation of aceclofenac appear to be a reasonable transdermal delivery system of the drug with enhanced skin permeability and efficacy for the treatment of muscle damage.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.18 no.1
• /
• pp.132-149
• /
• 1992

This study relates to a microemulsion gel which is applied in various cosmetic preparations because of good appearance, superior stability and a thin, uniform, non-greasy fi Am on the skin. Main object of this study is to elucidate the influence of polyol(clarifying agent and/or coupling agent in microemulsion) on microemulsion and to establish the optimum conditions for microemulsion gel formation in the view of superior consistency, stability, clarity and pick-up from a container. The constituents of the system are composed of water, polar ester oi1, nonionic surfactant and polyol. Using the three-component phase diagram and the tetrahedral-phase diagram, we have investigated the changes of transparence regions, consistency and resonance effect by an impact in microemulsion gel varying in polyol ratio. The results of this study showed that the variation in the content of water and couple ins agent has major influence on the microemulsion gel and the optimum formation region of microemulsion gel is the widest when the ratio of glycerine(coupling agent) to water is 63-75% It is believed that optimum use of polyol seems to be helpful to obtain the microemulsion gel containing maximum amount of oil phase with minimum amount of surfactant which is recently one of the major problems of cosmetic chemists.

• Environmental Engineering Research
• /
• v.23 no.3
• /
• pp.242-249
• /
• 2018

The use of palm oil and diesel blended with ethanol, known as a microemulsion biofuel, is gaining attention as an attractive renewable fuel for engines that may serve as a replacement for fossil-based fuels. The microemulsion biofuels can be formulated from the mixture of palm oil and diesel as the oil phase; ethanol as the polar phase; methyl oleate as the surfactant; alkanols as the cosurfactants. This study investigates the influence of the three cosurfactants on fuel consumption and exhaust gas emissions in a direct-injection (DI) diesel engine. The microemulsion biofuels along with neat diesel fuel, palm oil-diesel blends, and biodiesel-diesel blends were tested in a DI diesel engine at two engine loads without engine modification. The formulated microemulsion biofuels increased fuel consumption and gradually reduced the nitrogen oxides ($NO_x$) emissions and exhaust gas temperature; however, there was no significant difference in their carbon monoxide (CO) emissions when compared to those of diesel. Varying the carbon chain length of the cosurfactant demonstrated that the octanol-microemulsion fuel emitted lower CO and $NO_x$ emissions than the butanol- and decanol-microemulsion fuels. Thus, the microemulsion biofuels demonstrated competitive advantages as potential fuels for diesel engines because they reduced exhaust emissions.

• Journal of Environmental Science International
• /
• v.7 no.6
• /
• pp.875-881
• /
• 1998

Microemulsion is prepared by the method of phase inversion emulsification with d-limonene that is environmental friendly substance and nontoxic to human body as dispersed phase. Emulsifier used for preparation of microemulsion is nonionic surfactants, polyoxyethylene nonylphenyl ether. Stability of prepared microemulsion was estimated by the various method of ξ-potential, hydrodynamic diameter and electric conductivity. When d-limonene is emulsified by NP series, microemulsion is most stable and narrowly distributed at HLB value of 12.3(either one emulsifier or mixed emulsifiers). Stability of microemulsion is increased as the amount of emulsifiers is increased at same HLB value of 12.3. In the case of using the same amount of emulsifiers, number of produced micelle are relatively large as hydrodynamic diameter is small. Therefore, the state of microemulsion is stable and the electric conductivity is increased. One can determine that higher electric conductivity value means that microemulsion has more micelles and is more stable.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.20 no.1
• /
• pp.52-63
• /
• 1994

It was investigated that the effects of surfactant to cosurfactant ratio on the stability and rheological properties of o/w microemulsion. The stability of microemulsion was good in the surfactant to cosurfactant ratio 20/40 - 30/30. In the point of rheological properties, a yield stress meande the inner structure formation was detected and the area of hysteresis loop was increased with increasing of surfactant content of the ratio. The microemulsion prepared by the Microfluidizer was characterized by rheopetic.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.5
• /
• pp.331-334
• /
• 2008

The objectives of this study were to formulate oral paclitaxel microemulsion and to compare the bioavailability of paclitaxel in the microemulsion formulation from the commercially available $Taxol^{(R)}$ formulation. Paclitaxel microemulsion was formulated with much less amount of Cremophor $EL^{TM}$ as compared with $Taxol^{(R)}$ to reduce severe adverse reactions produced by Cremophor $EL^{TM}$. The area under the plasma concentration-time curve from 0 hr to 24 hr ($AUC_{0-24}$), maximum plasma concentration ($C_{max}$), and relative bioavailability of palcitaxel microemulsion were increased as compared with $Taxol^{(R)}$ after oral administration. The time required to reach $C_{max}\;(T_{max})$ of palcitaxel microemulsion was significantly shorter than $Taxol^{(R)}$ following oral administration. These results suggest the faster intestinal absorption and the enhanced oral bioavailability of paclitaxel in the microemulsion formulation.

• YAKHAK HOEJI
• /
• v.45 no.6
• /
• pp.634-640
• /
• 2001

Ibuprofen is one of the nonsteroidal anti-inflammatory drugs (NSAID) and has shown antiinflammatory; antipyretic, and analgesic activity in both animals and humans. But it causes gastric mucosal abnormalities including edema, erythema, and submucosal petechial hemorrhages and erosin in human. In addition, based on the pharmaceutical point of view the compression and dissolution ability of ibuprofen is known as poor. Therefore we studied to develop novel formulation containing water-insoluble drug, ibuprofen, using microemulsion consisting of surfactant, oil phase, and water phase was prepared for the purpose of increasing its bioavilability The physicochemical properties such as particle size, dissolution rate, solubility of ibuprofen in the system were determined. After oral administration of ibuprofen containing the microemulsion system, to Sprague-Dawley rats, pharmacokinetic parameters were also obtained. For the formulation in the study, oleic acid, linoleic acid, and several kinds of glycerides and triglycerides were used as an oil phase with several surfactants. Diethylene glycol monoethyl ether (Transcuto $l^{ }$) or saturated polyglycolized glycerides (Labrafil $^{ }$)as surfactant was used, the domain of microemulsion was wide. The diameter of o/w microemulsion was ranged from 90 to 220 nm. Microemulsion, prepared with unsatulated polyglycolized glycerides (Labrafil $^{ }$) and the 2 : 1 molar mixture of diethylene glycol monoethyl ether (Transcuto $l^{ }$)/polyoxyethylene(4) lauryl ether (Bri $j^{ }$ 30) , is expected to be promising system that increased the bioavilability of ibuprofen.ibuprofen.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.274-284
• /
• 1994

Phase Inversion Temperature (PIT) measurements showed that the addition of polar components such as oleyl alcohol and oleic acid to the system comprising n-dodecylpentaoxyethylene monoether ($C_{12}E_5$), nonpolar oil (n-hexadecane) and water produced large reductions in the PIT. The PIT was lowered as the additive-to-surfactant ratio in the surfactant films in the microemulsion phase was increased. Another dramatic effect of additive was the manner in which it affects the volume of the microemulsion phase at the PIT of the oil and water solubilization characteristics. Microemulsion phase volume was increased rapidly with decreasing PIT, i.e., with increasing amounts of additive in the system. Also with a decrease in PIT, the solubilization parameters of both oil and water in the microemulsion phase were strikingly increased. Even though soil removal data were not available for the conditions where our results obtained, PIT measurement seems a useful starting point for estimating conditions when middle-phase microemulsion formation and its associated high solubilization of oil can be expected.